Question about 2008 GMC Acadia
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You will have to go through your mud guards. Remove your tire, and look inside your wheel well, you will see two part mud guard, front half and back half. Just remove the 7 screws from the front half, 5 on the wheel well itself, and two on the bottom, retaining screw to the bumper, now depending on which side you're looking at anywhere from 5-7 plastic pop-its. Use a flat tip screw driver to loosen the pins up, then remove the pop-it studs. There are two on the bottom front that connect to the vehicle frame. Once this is removed, you can access your headlight assemby to replace both bulbs. Note, you will have to do this to replace your fog light bulb should it go out as well.
Posted on Mar 22, 2009
access behind from under the hood. Look at the replacement part. Your NOT changing the whole unit. Just the bulb. Quarter turn and it should come out
Posted on Nov 13, 2009
under the hood there will be a large, plastic weather cover to unscew by hand, remove the 3 pin connecting plug, there will be a spring loaded clip holding in the globe, depress the looped end and divert it over to one side thsi will release the globe, assembly is in reverse, be careful as not to touch the end og the globe, as the oil on your fingers are detremental to its operation. No special tools required to do this. Good luck
Posted on Nov 20, 2009
Tips for a great answer:
Oct 27, 2010 | 2008 GMC Acadia
May 11, 2010 | 2008 GMC Acadia
Feb 11, 2010 | 2007 GMC Acadia SLE
Nov 20, 2009 | 2008 GMC Acadia
Nov 13, 2009 | 2008 GMC Acadia
Nov 05, 2009 | GMC Acadia Cars & Trucks
Aug 19, 2009 | 2008 GMC Acadia
Feb 24, 2009 | 2007 GMC Acadia SLE
1,384 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: