Question about 2004 Kia Sorento

1 Answer

How do you replace the condenser on a 2004 kia sorento i can not find a diagram on how to do it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 336 Answers

Hi there,

I hope below steps can help..

1. Disconnect the ground cable from the battery terminal. 2. Disconnect the fan motor connector. 3. Loosen the radiator drain plug to drain the coolant. 4. Disconnect the upper and lower hoses and overflow tube after marking the radiator hose and the hose clamp the ease reassembly.

Cover or plug the hose and inlets of the radiator so that dust and other foreign material etc. can not enter after the hose is disconnected from theradiator. 5. For vehicles with automatic transaxles, disconnect the oil cooler hoses from the automatic transaxle. 6. Remove the air conditioner condenser fixing bolts and radiator bracket fixing nuts. how do you replace the condenser on a 2004 kia - f17b093.jpg 7. Remove the radiator and the fan motor. 8. Remove the radiator fan motor and condenser fan motor from the radiator. Regards, Jeep Brainy

Posted on Sep 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Firing order to 2004 kia sorento 3.5L


The firing order is given as 1-2-3-4-5-6 for distributorless ignition.
The link below gives some diagrams:

kia sorento 3 5 firing order Google Search

There's also a youtube video:
03 Kia Sedona 3 5L firing order

Mar 07, 2017 | 2004 Kia Sorento

1 Answer

Crankshaft position sensor 2004 kia sorento


hope you get this diagram if not go to autozone library when you open the hood go to middle of the front of engine it should be very close to the crankshaft it self

Jun 30, 2015 | 2004 Kia Sorento EX

1 Answer

How to replace camshaft position sensor 2004 Kia Sorrento?


I no longer own a 2004 Kia Sorento due to it was giving me so many problems therefore, I traded it in for a 2014 Nissan Rogue. Will never look at another Kia.

May 16, 2014 | 2004 Kia Sorento

1 Answer

How do I replace the radiator in my 2004 kia


I don't currently have access to step by step instructions for your Kia Sorento, but I would imagine that it takes a standard tool ratcheting tool set to unscrew the bolts for the shroud, and lift any fans out of the way. Then, the radiator hold down hardware can be removed and the radiator should be disconnected fromt he cooling system (via the hoses) and then you can pull it out. It does not weigh much.

Installation is the reverse of the removal.
---
recalls for engine follow:

Gasoline Engines
2004 KIA SORENTO


03/01/2009 KIA REMANUFACTURED ENGINE PROGRAM 01/01/2004 CYLINDER BLOCK DAMAGE - HEAD GASKET LEAK - POOR RUNNING OR HARD START, EXCESSIVE WHITE SMOKE AND/OR COOLANT SMELL FROM EXHAUST, MISFIRE DTC - REVISED 06/01/2005 LOCKNUT RE-USE PROHIBITED 07/30/2007 CRANKSHAFT PULLEY BOLT REPLACEMENT

Jul 21, 2010 | 2004 Kia Sorento

2 Answers

Does the kia sorento 2.5 crdi xe have a timing on a 2004 plate


THE KIA SORENTO HAS 3.3 AND 3.8 ENGINES THEY HAVE TIMING CHAINS.THE KIA 2.4 ENGINES HAS TIMING BELT GUIDE PLATE.

Jun 21, 2010 | 2004 Kia Sorento

3 Answers

Where can i get wiring diagram for 2004 kia sorento


i want to attach reversing sensors to my kia sportage 2005

Nov 12, 2009 | 2007 Kia Sorento LX 4x4

2 Answers

CHANGING THE 3 BELTS ON MY 2004 KIA SORENTO


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2004/make/kia/model/sorento/2004_kia_sorento_drive_belt_routing_diagram.htm

Mar 20, 2009 | 2004 Kia Sorento

2 Answers

2004 kia sorento can't find water pump


I apologize for the quick answer but this site has helped me with all diagrams you just need to sign up

www.kiatechinfo.com

Dec 27, 2008 | 2004 Kia Optima

Not finding what you are looking for?
2004 Kia Sorento Logo

526 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...