Question about 2000 Pontiac Bonneville

1 Answer

Need to replace a brake light - 2000 Pontiac Bonneville

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

In the trunk of the 2000 poniacs there are black caps over the screw nuts that hold your brake lenses in the body of the car. you will have to remove them caps and the nuts off the screws the lens should have 3 on it. hold the lens when you take the 3rd one off to keep your len from faling to the ground. then just pop he twist fixture and pull ad replace the light buld.

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 Mercedes E430 base sedan. Last week I replaced the brake light switch because it was out and it solved the problem to the point that I can now put my car into gear and drive it, however, as...


Brake light switch problem may cause the ESP / BAS lights to illuminate.

Common symptoms of a bad
Mercedes brake light switch.
  • Car stuck in Park.
  • ABS ESP ETS lights come on.
  • Can not move the shifter from Park to Drive.
  • Brakes Defective Warning on Instrument Cluster
  • Car won't shift gears. Stuck in 2nd gear, limp mode.
  • Brake lights don't work. (Brake light switch can still be defective even if the brake lights work. Checking the brake light operation is not a good test.)
  • ESP, BAS, ABS lights turn on. Car won't shift properly. Stuck in gear.


TEST: To test your new brake light switch: Turn you car off to reset the ABS light. apply the parking brake. and start the car in neutral or park without using the brake. if the problem is the brake light switch... the light will only come on when you press the brake pedal.

If you replaced the brake light switch and the light is still on you should check a few other things such as:

  • Fuses and Relays
  • ABS pump
  • ABS wheel speed sensor
  • Brake Fluid Level
  • Get an advanced scanner to read trouble codes.


NOTE: ** You may need a MBZ scan tool to reset the error code which was stored in the ECU because of the bad brake light switch.

Feb 25, 2015 | 2000 Mercedes-Benz E-Class

Tip

Brake Lights Dull or Flickering - All Cars



Dull or Dim Brake Light Repair: If your car has a dull or dim brake light it is dangerous to you and other drivers. A dim brake light is a mystery to most people because the bulb is working, just not correctly. First confirm a new and correct brake light bulb has been installed. Next, turn the ignition key to the "on" position and have a helper depress the brake pedal. With the bulb installed touch a grounded test light to the outer bulb holder ring. If the bulb brightness changes the bulb socket ground has high resistance and needs to be repaired or replaced.

Flickering Brake Light Bulb Repair: A flickering brake light bulb can be very distracting and annoying. A brake light flickers because the power or ground is being obstructed momentarily. The most common cause for this condition is a loose fitting bulb socket. To check for this condition remove the brake light bulb in question, while a helper hold their foot on the brake pedal move the bulb around slightly in the socket. If the bulb flickers replace or repair the bulb socket as needed to regain proper brake light bulb operation. If the brake light bulb socket tests ok wiggle the brake light fuse and wiring at the brake light bulb socket, brake light switch and turn signal switch (American cars). If the brake light bulb flickers repair the component or wiring as needed.
Preferred Procedure: Always replace brake light bulbs with manufacturers recommend replacement bulbs. If you cannot find the correct replacement bulb part number consult an auto parts store for additional manufacturer information.
Common Problems
When brake light bulbs are replaced with the incorrect bulb causing no or dim brake light operation
If the brake lights stay on continuously it could mean the brake light switch has failed or an adjustment is needed.

on Dec 18, 2009 | Honda Civic Cars & Trucks

2 Answers

Transmission code po703


P0703 Suzuki - Brake Switch Circuit Malfunction
Possible causes
- Faulty Brake Switch
- Misadjusted Brake Switch
- Brake Switch harness is open or shorted
- Brake Switch circuit poor electrical connection
Check if the stop light works with the brake pedal, if the brake lights are inoperative, replaced or adjust the brake switch.
Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Brake lights inoperative


Nov 21, 2013 | 2004 Suzuki Verona

2 Answers

2006 brake light will not go out


Light gets power from brake light switch/.May be switch got shorted an brake light getting non-stop power causing it not to turn OFF brake light.

Get the brake light switch checked. Check volt at brake light switch.

It can be faulty brake light switch causing the problem or its wiring short for switch.

==========

To trouble shoot brake related problem, check the help links mentioned below:-----


Click the link:----

1996 Buick Regal Grand Sport Brake light Switch Location?

http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------

No brake lights on Buick?

http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------

Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------

How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------

How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------

Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------

1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------

How to replace rear Brake lights on 2004 Toyota RAV4?

http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------

One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------

2002 Lincoln Town car Fuse Box

http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html

2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------

Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------

Brake lights not working

http://schematicsdiagram.blogspot.com/2012/11/brake-lights-not-working.html

-------

2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------


These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

My 1996 taurus has the brake lights constantly on. when you disconnect the switch by teh brake pedal the car will not shift out of park but teh brake lights turn off???


CHECK BRAKE LIGHT SWITCH TO SEE IF ITS TOUCHING THE BRAKE PEDAL.IF BRAKE LIGHT SWITCH OR BRACKET LOOSE AND AWAY FROM BRAKE PEDAL BRAKE LIGHT WILL STAY ON.IF BRAKE LIGHT SWITCH INTACT BRAKE LIGHT SWITCH NEED REPLACING.WHEN REPLACING BRAKE LIGHT SWITCH OR IT NEEDS ADJUSTING MAKE SURE BRAKE LIGHT SWITCH PLUNGER TOUCHES BRAKE PEDAL ARM WHEN YOU RELEASE BRAKE PEDAL BRAKE LIGHTS SHOULD TURN OFF.

Sep 01, 2010 | 1996 Ford Taurus

1 Answer

Brake lights stick on


It sounds like the brake light switch down on the brake pedal is stuck and it needs replaced,Its got like a push button setup when you apply the brakes the brake pedal pushes the brake switch button in brake lights come on and when you relase the brake pedal the button on the switch comes back out and brake lights go out but if switch is worn out or sticking the lights will stay lit even when off the brake pedal so just replace the brake light switch down on the brake pedal.

Apr 20, 2010 | 1992 Dodge Dakota

1 Answer

Brake light in dash board flashes with beeping sound also red brake light


If its the ebrake light the switch needs to be replaced, if its the brake sensor light you need to replace sensors and brake pads.

Apr 01, 2010 | 2002 Mercedes-Benz M-Class

3 Answers

Brake lights do not work All bulbs have been replaced.


Troubleshooting Procedures - Read Completely Before Beginning
(American Car) All Brake Lights Not Working
  • Check System Fuse: A fuse is used to protect the brake light circuit from amperage overload. If the fuse has failed it will not allow the electrical current to continue to the brake lights. To check the fuse, first locate the brake light system fuse in the fuse panel which is either under the dash or under the hood in the power distribution center. Connect the test light to a ground like an engine or dash bracket and turn the ignition key to the "on" position. Using the test light probe both sides of the fuse. If the test light illuminates on both sides the fuse is ok continue onto the next step. If one side of the fuse illuminates the fuse has failed and needs to be replaced. If the fuse fails as soon as it is replaced or when you apply the brake pedal the brake light electrical circuit is shorted to ground. Rarely a system short can occur, a car repair manual is needed to find the wiring schematic for the brake light circuit. Once the brake light wiring has been located inspect and repair as needed.
  • Check Brake Light Bulbs: All cars have three brake light bulbs that create the brake light illumination affect. If all of these brake light bulbs fail no brake light operation will occur. I know what you're thinking, you might say all three brake lights at once? But in reality one brake light went out at a time and you did not notice. People only tend to notice something when they almost run into the back of your car to help persuade them to inform you the brake lights aren't working. Remove any of the brake light bulbs to confirm the bulb is ok or burned. After the bulb has been removed inspect the filament and replace if failed. If the brake light bulbs are ok continue to the next step.
  • Checking the Brake Light Switch: A control switch is used to connect the brake light electrical circuit. This switch is located near the brake pedal lever. Basic switches have just two wires, power in and power out to the turn signal switch. Use a test light that is grounded and with the key in the "on" position test for power at one side (wire) of the switch, then press the brake pedal while testing the opposite side (wire). It should illuminate the test light, if electrical power is connected through the switch go to the next step. If no power is detected through the switch the brake light switch has failed and replacement is required. If your car is equipped with more than two wires integrated into the brake light switch a car repair manual is needed to locate the proper brake light circuit wiring.

Jul 07, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Brake Lights


Brake light not turning off it is either a contact or the brake light switch that need replacement. In your case , if brake lights go off playing with the pedal , that means that the switch must be replaced. The brake light switch it is usually located behind the pedal and gets activated when you push the brake pedal.

Jun 05, 2009 | 2000 Oldsmobile Alero

Not finding what you are looking for?
2000 Pontiac Bonneville Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...