Question about 2005 Dodge Ram 2500 Truck
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I would think you found the low pressure port by now? But just in case most Dodge trucks I have seen have the low pressure port just above the compressor on the suction line. Of coarse leave it to Dodge to move it on some applications? Good Luck !
Posted on May 26, 2009
Shouldn't really be necessary to do anything to reset it if the system is operating properly.
"The system will automatically update and the TPM warning lamp will extinguish once the updated tire pressures have been received. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this information."
"A system fault can occur by any of the following scenarios:
1) Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors.
2) Installing some form of aftermarket window tinting that affects radio wave signals.
3) Lots of snow or ice around the wheels or wheel housings.
4) Using tire chains on the vehicle.
5) Using wheels/tires not equipped with TPM sensors."
Also, if you have the premium TPM system, the spare tire being low could trigger it, or with either the base or premium system, if you have a flat and change to a spare, the original flat tire could keep it from re-setting. And of course, a faulty sensor could be the problem.
There is a re-setting tool, but that should only be needed if the tire positions are changed (like if you rotate your tires), and that's only so that it can accurately tell you which tire is low, as opposed to turning off a warning light.
Good luck and thank you for using Fixya.
Posted on Mar 08, 2010
you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.
Posted on May 18, 2010
Welcome, If you have driven over a month and it has not reset there is a problom with one of the 4 sensors, You will need to have the TPMS scaned to see witch sensor is not working,, Here is a link explainin this in detail
Posted on Jul 14, 2010
Tips for a great answer:
May 23, 2016 | Dodge Ram 1500 Cars & Trucks
Aug 02, 2015 | 2009 Dodge Caliber
Mar 11, 2015 | 2001 Dodge Ram 2500 Truck
Jul 21, 2014 | Dodge Ram 2500 Cars & Trucks
Jan 13, 2014 | 2009 Toyota RAV4
Nov 14, 2010 | 2008 Dodge Ram Pickup 2500
Oct 15, 2010 | Dodge Ram 2500 Cars & Trucks
Jul 28, 2010 | 2009 Nissan Altima
Nov 21, 2009 | Dodge Durango Cars & Trucks
950 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: