Question about 1993 Ford Crown Victoria

3 Answers

Check engine light

1993 crown vic the check engine light goes on only with highway driving what could it be

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It sound like the problem I'm having know. Engine lights goes on temp when highway driving at about 70 to 75 MPH. It then however goes back off. I pulled the codes stored in continuos memory, and got codes 322,336,and 337 which indicated EGR value opening not detected, pfe or dpfe current lower than expected with zero EVR duty cycle, and DPFE or EVP circuit above the current maximum limit of 4.8 volts.
The only way you'll know is to pull the codes. In my case, either the egr value is getting stuck, and/or I have the PDE or DPFE itself.

Posted on Aug 27, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 80 Answers

It is because of the heat of engine is rising up. so please check the coolant in the radiator. this will surely solve your problem, plz do rate me

Posted on Jun 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 744 Answers

Well first of all it means that u have a problem some where on the suv the only way to find the problem is to hook a diagnostic computer and see what the code is u will have to take the car to a shop who works on isuzu and im sure they can tell u what code it is and whats wrong or u can take the suv to advance auto parts and they can hook there machine to it for free and tell u the code good luck

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was driving my 1993 crown vic when all of a sudden the power steering stopped working and the battery light came on the dash board lights, car starts fine but wont steer


The serpentine belt, located in the front of the engine compartment on the front of the engine, has either come off or broken. In that case, you may need another belt. Or the idler pulley has gone bad. Look, using the aid of a flashlight if necessary, for a pulley that is loose. Good Luck!

Dec 06, 2014 | 1993 Ford Crown Victoria

1 Answer

1999 ford crown vic won't start. changed fuel


Maybe your problem is with the one or many injectors, if just one is bad, you will have problems. Get yourself a multimeter and set it to read in ohms and find what spec the injectors should be at. If out of spec, then you need to replace that one injector(s).

Mar 25, 2013 | Cars & Trucks

1 Answer

Will 93 crown vic ,motor work in 96 crown vic


No,not without a lot of switching of electronics

1993 is OBD1 & 1996 on is OBD2 System

The engine may be okey-- but not the induction
system or any electrical

Dec 25, 2012 | 1996 Ford Crown Victoria

1 Answer

1993 crown vic the check engine light goes on only with highway driving what could it be . When Im park and restart it its off again


You a have a check light on

That is called a MIL Lamp (Malfunction Indicator Lamp)

That not new to the auto industry

OBD1 Systems like yours stared in 1983 thru 1995

OBD2 is 1996 trhu 2013

So you check for codes every time you get any
dash light that doesn't go off once the engine is running

I would think you have experience with check lights & codes,
for decades with all your vehicles

Once you get the codes, I would guess your off to a repair shop,
as you didn't state you had codes or experience with cars & the
systems of the past 31 years

Oct 19, 2012 | 1993 Ford Crown Victoria

1 Answer

I have a 1993 crown vic and I just replaced all my fuses and I drov e tk wal mart and all of a sudden my car will not crank....all the lights come on it goes in gear it just wont turn over the dash just...


Sounds like the starter failed> If you have a small hammer lightly rap on the starter acouple of times > if it starts that will confirm you need a starter> Repkace the starter ASAP. if not call a tow truck> NOTE: don't get burned if the vehicle is hot > let it cool down.

Mar 23, 2012 | 1993 Ford Crown Victoria

1 Answer

How big is the gas tank on a 1992 ford crown vic. how many miles to the gallon. my gas gauge doesnt work. so i dont know anything about the gas.


1992 Ford Crown Vic 4.6 L V8 Automatic

Fuel tank capacity is 20 gallons (US).

Your fuel consumption will be affected by many factors, such as :
- how you drive the vehicle
- the condition and tune of the motor
- driving conditions (traffic, city use, highway use etc)
- tire pressures
- type and grade of fuel used .

It is impossible for me to estimate what fuel consumption you can expect from your own particular car without a whole lot of information.

It's unwise to run the vehicle for long with no working fuel gauge.

Dec 17, 2010 | 1992 Ford Crown Victoria

1 Answer

Radio does not work in 1993 crown vic, want to put in a replaceme


Go to your local auto parts store where you can purchase a Ford audio removal tool. It looks like a wire shaped "U" that is inserted in the holes on face of audio system ..Follow the directions for use , you will find it a pretty easy task with the correct tool..

Dec 07, 2008 | 1993 Ford Crown Victoria

Not finding what you are looking for?
1993 Ford Crown Victoria Logo

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...