Question about 1999 Mitsubishi Montero Sport

2 Answers

Raido display off after entering the wrong code 3 times

My car radio displays off after entering the wrong code 3 times, I found my manual with the right code but now, I can't do anything since I don't know how to crear the "OFF" message, I found some site selling the code, but I don;t believe this is not the code I need, can anybody help.
Thanks, Jorge.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Call the dealer they will tel you how to fix your problem or call thier 800 service number and they will wlak you threw the issue.

Posted on Jun 27, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 38 Answers

If wrong code 3 times locks you out for 30 min if wrong code 9 times locks you out 60 min i got my code local dealer free.

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the steps to getting the safe mode off the radio in a 2002 volkswagen cabrio


Perform the steps in exactly the following order:
1. Turn on the Radio. "Safe" will appear in the display.
2. After 3 seconds, the number "1000" will appear in the display.
3. Use the radio station preset buttons 1 to 4 to enter the code number found on your Radio Card. (which was in the first page of Sound manual )
Use preset button 1 to enter the first digit in the code number. Use button 2 to enter the second digit, etc. The value range for each of the 4 digits is "0-9". The digit will increase by 1 each time you tap the preset button. The number returns to "0" after 9".
4. After you finish entering the code, press the right side (">") of the SEEK button for longer than 2 seconds until you hear an audible signal.
5. If you have entered the code number correctly, "LSM" will appear in the display. (It just was the radio channel indicator and then everything was working as usual).

Mar 05, 2011 | 2002 Volkswagen Cabrio

1 Answer

I have code '0832' for radio Beta /Passat 1999, but i can't enter it , what the methode?


Hello! If the battery has been disconnected and the radio was not changed the system will clear on its own...It takes 1 hour, with the radio on, to reset itself...However, here is the procedure...

1. Turn on the Radio... "Safe" will appear in the display...
2. After 3 seconds, the number "1000" will appear in the display....
3. Use the radio station preset buttons 1 to 4 to enter the code number...
Use preset button 1 to enter the first digit in the code number. Use button 2 to enter the second digit, etc... The value range for each of the 4 digits is "0-9"... The digit will increase by 1 each time you tap the preset button... The number returns to "0" after 9"...
4. After you finish entering the code, press the right side (">") of the SEEK button for longer than 2 seconds until you hear an audible signal...
5. If you have entered the code number correctly, "LSM" wlll appear in the display...

If you entered a wrong code number, "SAFE" will appear in the display... Initially it'll flash, then stay on...

You can repeat the procedure again one time...If the wrong code number is entered again, the unit will be disabled for 1 hour... Leave the unit on and the key in the ignition...

Guru......Saailer

Jan 31, 2011 | 1999 Volkswagen Passat

1 Answer

Radio locked no code


Unlocking the Delco Radio Theft-Deterrent Feature After a Power Loss

If you know the code that was used to lock the radio then use the following instructions from the owner's manual to unlock the radio.
Quote:
Enter your secret code as follows; pause no more than 15 seconds between steps:
1. Turn the ignition on. LOC will appear on the display.
2. Press MIN and 000 will appear on the display.
3. Press MIN again until the last two digits agree with your code.
4. Press HR until the first one or two digits agree with your code.
5. Press AM-FM after you have confirmed that the code matches your secret code. The display will show SEC, indicating the radio is now operable and secure.

If you enter the wrong code eight times, INOP will appear on the display. You will have to wait an hour with the ignition on before you can try again. When you try again, you will only have three more chances (eight tries per chance) to enter the correct code before INOP appears.
If you don't know the code that was used to lock the radio then you will have to use the dealer's unlock procedure as follows. The dealer code changes over time - the one listed is current as of this posting. If it doesn't work try 08359 or search the forum for messages with a more recent code.
Quote:
1. Press and hold presets 2 & 3 for about 10 seconds until the first three digits of the display code are displayed.
2. Write the numbers down.
3. Press the AM-FM button, write down the next three numbers.
4. Call 1-800-537-5140. When asked, enter dealer code 202108, press the * button, and enter the six digit code from the radio. You will get an unlock code, write it down.
5. Go back to the car, press the HR button and set the first two numbers, press the MIN button and set the next two numbers, then press the AM-FM button. The display will show SEC, indicating the radio is now operable and secure.

To remove the code, repeat step 5. you should see --- on the radio face indicating the code is now out of the radio."

Dec 29, 2010 | 2000 GMC Jimmy

1 Answer

Please i need help with 2001 montero sports radio


if you put in wrong code 3 times the radio will shut down for a few hours will not let you do anything try again the next day

Mar 31, 2010 | 2001 Mitsubishi Montero

3 Answers

I have a 1998 volvo S70 and the radio wont reset, I left the battery disconnected for over 3 hours and it still says off, how do I reset it to put in my code?


You need to leave the key in the ignition in position I (accessory) for two hours, after that it will say code and you can input the code. The radio switches to "OFF" after three failed attempts with the wrong code. If you dont have the code call the dealership with your VIN and they can give it to you.

Jan 25, 2010 | 1998 Volvo S70

1 Answer

How to reset the raido


Hello,

There is a trick to the procedure. You have to turn the key to position 1 or the first stop on the ignition. Turn on the radio and wait between 2.0 to 3.0 hours for the radio to reset and ask for the code. From the owners manual. My 97 takes between 2:25 and 2.5 hours to reset. Every radio is different.

To enter the code:

After installation or when the set has been disconnected from power, the set displays "codE" when it is switched on.
Enter the 4-digit code using the preset buttons. If the correct code is entered, "on" is displayed and the set is ready to use.
If you enter an incorrect code you must enter the correct code again from the beginning.

Incorrect code

If an incorrect code has been entered "rPt" is displayed. Enter the correct code.
After three unsuccessful coding attempts the set will lock and remain locked for two hours.
"OFF" is displayed.

During this waiting period:

the battery must be connected
the ignition key must be turned to position I
the unit must be turned on
Make sure the headlights are turned off to help prevent battery drain (please refer to page 2:6 for information on turning the headlights off). Enter the code again once this time has elapsed.

Goodluck!
Ryan

Jun 11, 2009 | 1994 Volvo 960

1 Answer

Ive got a factory radio reading of i have code how do i reset to put in code


When you turn on the radio, it will say "codE" on the display. You have the 4-digit code number for your radio, to enter the first digit, press the "1" button on the radio the number of times until the first digit matches. For example, if your code is "2156" then, press radio preset button 1 two 2 times, then press radio preset button 2 one time, then radio preset button 3 five 5 times and finally preset button 4 six times.
THEN if the display is correct (should show 2156 in this example), press TAPE button. You should hear a beep and the radio should be working. If you make a mistake and enter a wrong code, the display will show "Err". You have 3 tries to get this correct or the radio may be toast. These are the steps for the stock radio in my 1995 GSX and they've worked for me each time I've lost battery power. Good luck!

Apr 09, 2009 | 1995 Mitsubishi Eclipse

1 Answer

I have entered incorrect radio code for my 01' ML320 Radio and it is know stuck in WAIT. How can I reset radio and re enter Correct code Thanks


leave the radio on for a few days, with the wait displaying, it will display CODE after a few days, 2 - 3 days, then enter the correct code , everytime u enter a wrong code the time increases.

Mar 01, 2009 | 2007 Mercedes-Benz ML320 CDI

3 Answers

Need to input my radio code on 2005 Honda Civic


ok your radio displays ERR , OK 3 options let it sit for an hour turned on , to reture to CODE display , or pull the radio fuse out for a minute and put it back in , returning to the CODE display , or disconnect the battery for a minute , returning to the CODE display . you got the ERR display because the code was wrong or not entered correctly , make your choice of getting the radio back to the CODE display by 1 of those 3 choices , while the radio displays CODE , use the preset buttons , if the first number of your code is 4 , then press the #1 preset button 4 time , when the first number has been input , put the 2nd number in by pressing the #2 prest button , if 2nd number of code is 8 , press the # 2 preset button 8 times till the # 8 is displayed , and so on . you see where this is giong ? when you have entered all the numbers correctly you will have you radio back . when you say you have the radio code , good luck ! were rooting for ya .

J5

Jan 19, 2009 | 2005 Honda Civic

Not finding what you are looking for?
1999 Mitsubishi Montero Sport Logo

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...