Question about 2003 Chevrolet Malibu

2 Answers

Left rear window will not go up in my 2003 chevy malibu. What is wrong with it?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 855 Answers

Do you hear the motor running when you try to put window up? If you do the cable from the window track to the motor is most likely broken. If not the switch , motor or a wire couldbe broken.

Posted on Jun 27, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If it is power windows the motor went out or off track..

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which fuse box on the 2011 Chevy Malibu is the fuse for the rear defrost


Fuse box rear , fuse #23 30 amp ! Do you know where this is located ? There is also a relay for the Rear window defogger , located in the same rear fuse box .
Fuse Block - Rear
Left side of the luggage compartment, behind the left rear wheel well . But you really need to know how it works , you can check fuse an relay .
Rear Window Defogger Operation
Battery positive voltage is supplied through the BATT 1 fuse in the underhood fuse block to the rear defog relay switched input. When the rear defog switch button is pressed, the body control module (BCM) energizes the rear defog relay by providing a B+ to the control circuit of the rear defog relay. This allows battery positive voltage from the relay switched input through the switch contacts and out the relay switched output to the rear window defogger grid. The HVAC control module houses the rear defog switch and also illuminates the rear defog indicator on the switch button, upon this request. Ground for the rear window defogger grid is provided by G301 for the Sedan or G302 For the Extended Sedan.

Nov 23, 2016 | 2011 Chevrolet Malibu

1 Answer

Where is fuse for rear window defroster


Listed as the rear fuse block a 30 amp fuse number 23 in the block. Check in the trunk left and right sides for the block.

Oct 17, 2015 | 2005 Chevrolet Malibu

1 Answer

Rear right tire on a 2003 chevy malibu wont come off after lug nuts removed


get a BIG hammer and try striking tire (NOT RIM) USE SOME LUBE SPRAY

Sep 30, 2012 | 2003 Chevrolet Malibu

1 Answer

2003 Chevy Malibu where is the coolant temperature switch


2.2L (L61) Engine
The Engine Coolant Temperature (ECT) sensor is located just to the left of the exhaust manifold in the thermostat housing between the two coolant pipes.

3.5L (LZ4) & 3.9L (LZ9) Engine
The Engine Coolant Temperature (ECT) sensor is located on the left cylinder head at the rear. It is just above the transaxle mounting bolts.

Hope helps (remember to rate and comment this answer).

Sep 19, 2011 | 2003 Chevrolet Malibu

1 Answer

Rear light problems


check all the wiring for that light and if u have power in all that mean you may have replace the wrong type bulb

Jul 01, 2009 | 1999 Chevrolet Malibu

1 Answer

Fold down rear seats


THE SEAT RELEASES ARE IN THE TRUNK IN THE AREA WHERE THE SPEAKERS ARE NEAR THE EDGE OF THE TRUNK OPENING.

May 25, 2009 | 2003 Chevrolet Malibu

2 Answers

Drivers door panel removal


The book says 1. remove power accesory switch panel by using suitable flat blade tool at front. 2. Disconnet electrical connections.
3. pry door handle plug by using small flat bladed tool
4.remove door trim handle mounting screws
5. remove door trim panel from retainers.Start at rear bottom corner and pry outward.
6. remove door panel.
KD does make a tool that will properly pry the door panel away from reainers. KD 3705 You might get by with a screwdriver.
One other thing you may need to have the window down to get the panel to come off. You will have to lift up on it once it is loose from the fastners.
Hope this helps you out.

Mar 23, 2009 | 2003 Chevrolet Malibu

1 Answer

2003 Chevy Malibu driver's window won't work


If it is a very loud noise, then it may be the window regulator. This is the assembly that the motor and glass bolt to. The door panel would have to come off to inspect.

Dec 06, 2008 | 2003 Chevrolet Malibu

Not finding what you are looking for?
2003 Chevrolet Malibu Logo

993 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...