Question about 2004 Ford Explorer

1 Answer

Ever since i changed the wheels on my 2004 ford explorer my tyre monter warning light stayes on has any body got any i dears

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 155 Answers

It depends on the type of pressure monitor system that is used.

Some work off the ABS sensors, measuring the rotation speed of the wheels (if a wheel slows down it indicated the tyre pressure is low.) It is possible that a different wheel / tyre size could require the system to be reset / recalibrated.

More common is to have a set of sender units mounted inside the tyre (usually forming part of the valve assembly.) Did you transfer the sender units from your old wheels to your new ones? This could well be the problem.

Hope this helps!

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 ford explorer abs light constant and 4x4 blinking any ideas?


According to the manual pg 10. http://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/04expog3e.pdf
Anti-lock brake system: If the ABS light stays illuminated or
continues to flash, a malfunction has been detected, have the system
serviced immediately. Normal braking is still functional unless the brake warning light also is illuminated.

Apr 16, 2014 | 2004 Ford Explorer XLT

1 Answer

Tyre warning light stays on


Hi. if the tyre prssures are correct then you need to into the dash menu and select tyres and store the pressures. this will reset the light.

Apr 11, 2014 | 2012 Volkswagen Golf R Base 2dr Hatchback...

1 Answer

2005 ford explorer ABS and AdvanceTrac warning light stay on


There could be many issues with this light on, only a professional scan tool or the FORD dealer has an OBD scanner that can talk to the ABS module. From a look at some common problems, people have changed the front wheel speed sensors to fix this problem.

Jan 16, 2013 | Ford Cars & Trucks

1 Answer

Reset tyre pressure warning light mini one


i have just had my tyre on the front right changed due to puncture, and now i have a warning light - low tyre pressure which is very annoying! I went to the mechanic and he told me he needs to reset the computer system and it will go away! is this correct? i have my doubts now as he was the same mechanic who changed my tyre and may have interfered with the sensors in the car.
Please help :(

Mar 21, 2012 | 2004 Mini One

1 Answer

Hi, my tyre pressure sensor came on indicating a puncture? I have felt the tyres over a 3 hr period, but no tyres are going soft. Could it be the sensor?


Try to inflate each tire to the same pressure and run it. If the light comes on after clearing it, then it could be a bad wheel speed sensor circuit.

But, be warned, that the car will sense even slight pressure irregularities over several miles based on wheel speed sensor data.

Nov 29, 2010 | 2004 BMW 5 Series

1 Answer

The ABS light came on (stayed on) and the 4X4 HIGH light flashes. There is also a noticable grinding/rubbing noise coming from the front wheel-well when I'm making a sharp turn, going out of a tight space...


Here is my question

The ABS Light is on. For how long,and why are you here,v.s. having it checked out and repaired.
The grinding/etc,would have me putting the vehicle up on stands immediately, and checking it out. I would in no way drive it,like that

Sounds as though your wheel bearing,tone ring,abs sensor etc ,are being chewed up, and causing the code to set

Oct 23, 2010 | 2004 Ford Explorer

1 Answer

Steering wheel shudders when turning left 03 ford explorer


when my front wheel bearing went the ABS light came on common on ford (exploders) explorer anyway check the unaversal joint on front there thould be no play at all when moving from foreword and reverse actually easyest way to do this is to jack the tire off the ground and move tire back and forth and look for any play, and last tires ? Are they warn my exploder did the same thing the only fix is 4 new same size tires I changed my wheel bearing and tires and all is good at 94K good luck CJ

May 12, 2010 | 2003 Ford Explorer

1 Answer

How do I take out the spare tire from under the ford explorer?


hi from uk if the spare tyre is fitted/secured under the rear end of car on a cradle?? then to remove it open rear hatch lift carpet up near to the rear cross member that hatch closes onto you should see a bolt head in a dished hole ? this bolt head is same size as wheel nut brace of your car so using the wheel brace turn the bolt anticlockwise as you would to unlock wheel nuts? you will have to turn for a while as this bolt is hooked to the tyre cradle you will see tyre lower as you turn when lowered fully to its stup ? you then lift cradle+tyre up enough to unhook bolt hook from cradle to reinstall is reverse operation to above till bolt tightens with tyre loaded WARNING! do not drive vehicle without a tyre loaded on cradle and secured as to simply rehook and secure bolt is not sufficient and the cradle WILL jump off when on rough road as well as an annoying rattle from loose cradle hope this helps

Dec 27, 2009 | 1998 Ford Explorer

5 Answers

BMW 320D,2006- run flat tyre warning light is on. How do I reset?


Using the indicator stalk, navigate to the tyre pressure reset option, press the reset button twice in short succession but hold it in the second time until a tick appears on the display

Apr 19, 2009 | 2003 BMW 325

Not finding what you are looking for?
2004 Ford Explorer Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...