Question about 2003 Ford Expedition

1 Answer

Lost my keyless entry code for my 2003 ford expidition

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

The factory reset code is behind the glove box. To see the code you'll need a flashlight. No other tools.
First, empty the glovebox and open to stops then gently bend those stops at the top of the glovebox in to clear the trim. Swing box down and allow it to hang. Next, you'll see several wiring looms in the right section of the area behind the glovebox. Behind that is the ECM, the componenet you're looking for. It's mounted facing the left side of the truck with a code label on it, so it's a little hard to read. Get a piece of paper and write down the only 5 digit code printed on the label. It's bold face and is one of the bigger numbers but not the biggest. Once you have the code, write whatever 5 digit you want your new code to be on same piece of paper. Go to drivers door, lock truck completely. Enter the factory code into the keyless entry, and within 5 seconds press the 1-2 button on the keyless entry the enter your new code. The truck should unlock. SuPER EASY!!

Posted on Jul 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Factory deset code for keyless entry panel


check the inside cover to your owners manual, it should be there. if not then go to ford dealer in your area and they will be able to bring it up on your vin number

May 04, 2016 | 2003 Ford Explorer

1 Answer

Lost keyless entry for 2004 ford expidition wont star car hrn goes off had to discontent battery


use the key to lock and unlock the drivers door. This should reset the alarm.

Sep 26, 2015 | Ford Cars & Trucks

1 Answer

Master reset code for keyless entry ford f150 2004


. If the master code or owner selectable code is lost or forgotten, the GFA RF keypad must be replaced. These codes are not stored in any vehicle module (with the exception of 2004 F-Super Duty vehicles produced prior to 12/3/2003).

Aug 22, 2010 | Ford F-150 Cars & Trucks

1 Answer

Lost keyless entry code


Keyless entry code was on a small strip attached to the left trunk hinge in my 94 T-Bird. It wasn't anything fancy just a 1/4x2" strip with 5 numbers on it Your owners manual should give you the location, but mine was kind of vague like drivers side of trunk.I hope this helps

Feb 03, 2010 | 2000 Ford Crown Victoria

2 Answers

I just purchased an expidition 2003, the car lot does not have the code for the keyless entry how can i locate this


In most cases the dealership where it came from placed stickers under the hood, in the door jam, and under the rear hatch. It will be a 5 digit number that can also be found in the vehicle manual if you have these. If none of these exist then the ford dealer will be able to find it for you for a small charge by hooking up to the vehicle computer.

Oct 27, 2009 | 2003 Ford Expedition

1 Answer

I just bougt 2003 windstar trying to find keyless entry code can"t find lacation


Keyless entry code is on REMOTE KEYLESS ENTRY MODULE .You have to remove utility compartment at lower center of dash and then you will see module with 5 digit code on white label. Hope this helps.

Jul 09, 2009 | 2003 Ford Windstar

1 Answer

Key Pad Entry does not work


does the key pad light when you press a button at night? If yes, the fuse is ok.
Do you have the plastic card with the permanent code in your owner manual packet? If yes, tryit.
report back.

Keyless Entry The keyless entry keypad is hardwired to the GEM. The GEM interprets the inputs from the keyless entry keypad and then controls the associated operation. The keyless entry keypad will be illuminated for five seconds when any button is pressed. Additionally, it will request the illuminated entry feature to turn the courtesy lamps on. If a lock all doors code is entered, the illumination will turn off, as well as request the illuminated entry feature to turn off the courtesy lamps. When pressed, the keyless entry keypad supplies the ground signal to the GEM or the GEM receives a signal from the keyless entry remote transmitter. Then the GEM outputs a ground signal to the appropriate lock or unlock relay which supplies the power to the actuator to lock or unlocks all doors, including the luggage compartment. The keyless entry remote transmitter also unlocks the liftgate or activates the panic alarm by sending a signal to the GEM.
--------------------------------------------------------------- Visual Inspection Chart Mechanical Electrical
  • Keyless entry keypad
  • Keyless entry remote transmitter
  • Central junction box (CJB) Fuse F222 (20A)
  • Circuitry
  • Generic electronic module (GEM)
------------------------------------------------------------------------
  • No communication with generic electronic module (GEM)
  • Generic electronic module.
  • Circuitry.
  • REFER to Section 419-10 .
------------------------------------------------------------------------------------

Mar 08, 2009 | 2003 Ford Taurus

1 Answer

Keyless key pad entry code


Ford cars and such will put a sticker on the hinge or back gate with the numbers on it. It will just be a white sticker with black numbers. A five digit code.

God Bless Greg

Jul 16, 2008 | 2003 Ford Windstar

Not finding what you are looking for?
2003 Ford Expedition Logo

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...