Question about Plymouth Gran Fury

1 Answer

How do you remove the head rests from the front seats so you can install new seat covers. There are 2 chrome posts that pull up about 4 inches and will not budge in any direction from there. And there are no holes, levers, buttons or combination of pushing or pulling that seem to release the posts,

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 47 Answers

On my dart i had to cut the old covers and there was some sort of locking device holding them in, your replacing the covers any way right?

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the head rest out the front seat of a 2003 BMW 745li


Hi, at the back of the seat you have 2 parts you have to take off
1) bottom pocket insert
2) and the insert that's at top of that witch is just below head rest.
3) once those 2 parts off you will see the head rest and motor. Theirs two pins, one on each side of the chrome arms. Pull pins out and head rest slides.

Sep 26, 2016 | 2003 BMW 745 Li

1 Answer

We need to remove the drives side head rest to install a seat cover, but we cannot figure out how to remove the head rest. How do you remove the driver's side head rest?


Head Restraints Removal
  1. Unscrew front seat head rest guide rod retainers (610A18) .
  1. Pull up on front seat back head restraint (611A08) . Compress foam in area of front seat head rest guide rod sleeves (610A16) .
  1. Remove front seat back head restraint positioning springs. Pull front seat back head restraint up and out.
Installation
  1. Slide front seat head rest guide rod retainers onto front seat back head restraint posts.
  1. Compress foam in front seat head rest guide rod sleeve area. Install positioning springs on front seat head rest guide rod sleeves .
  1. Insert front seat back head restraint posts (notches on posts facing rearward) into front seat head rest guide rod sleeves and push down to engage positioning spring.
  1. NOTE: Front seat back head restraint must operate smoothly throughout its range of travel, must remain in any fixed position, and must not be freely removable from the seat back. If any of these conditions are not met, check for proper installation of positioning spring onto front seat head rest guide rod sleeve .

    Tighten front seat head rest guide rod retainers onto front seat head rest guide rod sleeves .
  1. Adjust front seat back head restraint by applying hand pressure, either up or down, to center area of front seat back head restraint .

9a4d433.gif

Aug 21, 2010 | 1998 Ford Taurus

2 Answers

How do i change a fuel pump on a 91 civic lx and how much do they cost?


In order to replace the fuel pump on that vehicle. Step one would be to disconnect the battery. Step 2 is to remove Rear seat. To do so you must try lifting up in the front of the seat. and pulling twoards the front of the car. If you Look between the bottom seat and the back rest you should see 2 14mm Bolts near where the seat belts are attached, remove these. then remove the rest of the seat.

After the seat is removed you should see a grey or black metal cover, under that cover is your fuel pump, remove the 10mm bolts holding the cover on. then use a flat head screw driver to pry the cover off, Disconnect electrical connectors and fuel lines, then just pull the pump assembly out ( some wiggling and manuevering may be required)

then just reinstall the new pump, reinstall seat and reconnect battery

Apr 11, 2010 | 1991 Honda Civic

1 Answer

How do you remove the front headrest from a 92 honda civic LX? I want to put seat covers on but the headrests are mounted on a single post and don't seem to be able to be removed. I tried to pry apart at...


I have a 92 Accord, which has 2 'posts'. To remove it, you must pull the head rest up as high as it will go, then there is a slide built into the plastic piece (round) the post goes through on the top of the seat. Push it in towards the post, while pulling up on the head rest, it should come out. Let me know if this works.

Mar 13, 2010 | 1992 Honda Civic

1 Answer

How to remove the head rest from the driver's seat 05 sunfire


There should be tiny holes in the plastic covers at the base of the chrome rods attached to the headrest use a paper clip and push it in the holes as you pull on the headrest in the full up postion.

Dec 23, 2009 | Pontiac Sunfire Cars & Trucks

1 Answer

How to remove the head rests on the front seats of a 1998 Lexus LS400 to install seat covers


there is a small push in clip at the bottom of one of the small chrome shafts. you push it in while you pull the head rest up.

May 17, 2009 | 1998 Lexus Gs 400

1 Answer

How do you remove the headrest on a 1996 ford crown victoria?


Head Restraints Each front seat is equipped with dual-post design front seat back head restraint (611A08). The front seat back head restraint is installed as follows:
  • It travels on dual posts which have notches to engage a spring-loaded catch in the guide.
  • The front seat back spring assembly retains the front seat head rest guide rod sleeve (610A16).
  • The front seat back head restraint is adjustable from its normal position to a raised position of approximately 25 mm (1 inch).
  • Pull up on the front seat back head restraint to raise it. Pushing down will return it to its normal position.
----------------------------------------------------------------------------------------------

Removal
  1. Unscrew front seat head rest guide rod retainers (610A18).
  1. Pull up on front seat back head restraint (611A08). Compress foam in area of front seat head rest guide rod sleeves (610A16).
  1. Remove front seat back head restraint positioning springs. Pull front seat back head restraint up and out.
Installation
  1. Slide front seat head rest guide rod retainers onto front seat back head restraint posts.
  1. Compress foam in front seat head rest guide rod sleeve area. Install positioning springs on front seat head rest guide rod sleeves.
  1. Insert front seat back head restraint posts (notches on posts facing rearward) into front seat head rest guide rod sleeves and push down to engage positioning spring.
  1. Tighten front seat head rest guide rod retainers onto front seat head rest guide rod sleeves.
  1. NOTE: Front seat back head restraint must operate smoothly throughout its range of travel, must remain in any fixed position, and must not be freely removable from the seat back. If any of these conditions are not met, check for proper installation of positioning spring onto front seat head rest guide rod sleeve.

    Adjust front seat back head restraint by applying hand pressure, either up or down, to center area of front seat back head restraint.

Mar 01, 2009 | 1996 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...