Question about 2001 GMC Yukon XL

1 Answer

HELP ME PLEASE

MY 2005 YUKON XL HAS BEEN GIVING ME PROBLEMS!! WE THOUGHT WE HAD BAD GAS. IT GOT BETTER THEN IT GOT WORSE!! TODAY I WAS ON MY WAY HOME FROM WORK AND THE SERVICE ENGINE LIGHT CAME ON. THEN THE REDUCED ENGINE POWER LIGHT CAME ON. I STOPED AND THEN PROCEDED TO GO HOME, THEN THE RPM JUMPED ALL THE WAY TO 3 I PUSHED THE GAS AND IT HAD NO POWER!! THEN THE TRANMISSION HOT LIGHT CAME ON!!!! WHAT COULD THIS MEAN? MAYBE MY TTRAMISSION IS GOING OUT?
HELP ME PLEASE

Posted by on

  • nheatherf Jun 27, 2009

    THE TRUCK IS NOT GETTING ANY POWER WHAT COULD CAUSE THIS?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 47 Answers

Id start with a trouble code scan, if the CEl came on it logged a code, have it read and start there, on some models you can disconnect the neg batt terminal for 5 min to clear and reset the codes.

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Replace spedometer cable 2003 gmc yukon xl


There is no speedometer cable on the 2003 Yukon, if there is no transmission issues like shifting problem. Your instrument cluster has gone bad, to pinpoint. Your stepper motor to your speedometer gauge has failed and needs to be replaced. You can do a search on Ebay for the stepper motor for around $10.00 which is better then the $400.00 cost of another instrument cluster.
There was a TSB on the replacement of the instrument cluster for your Yukon free of charge. The only cost to you is the labor charge unless your willing to do the job your self. Just go to the Gm Dealer and give them this TSB Number: # 07187C: Special Coverage Adjustment - Instrument Panel Cluster Gauge Needle Function - (Mar 20, 2009)
Subject:
07187C -- SPECIAL COVERAGE ADJUSTMENT - INSTRUMENT PANEL CLUSTER GAUGE NEEDLE FUNCTION

Models:
2003-2004 CADILLAC ESCALADE, ESCALADE ESV, ESCALADE EXT
2005 CADILLAC ESCALADE, ESCALADE ESV, ESCALADE EXT (U.S. ONLY)
2003-2004 CHEVROLET AVALANCHE, SILVERADO, SUBURBAN, TAHOE
2005 CHEVROLET AVALANCHE, SILVERADO, SUBURBAN, TAHOE (U.S.ONLY)
2003-2004 GMC SIERRA, YUKON, YUKON XL
2005 GMC SIERRA, YUKON, YUKON XL (U.S. ONLY)

Some customers of all 2003-2004 model year and certain U.S. 2005 model year Cadillac Escalade, Escalade ESV, and Escalade EXT; Chevrolet Avalanche, Silverado, Suburban, and Tahoe; and GMC Sierra, Yukon, and Yukon XL vehicles have reported that one or more of the instrument panel (IP) cluster gauges stick, flutter, or become inoperative. This may cause inaccurate readings, including the speedometer and fuel gauge. Special Coverage Adjustment This special coverage covers the condition described above for a period of 7 years or 70,000 miles (110,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership.
Dealers are to replace the instrument panel cluster after the condition has been verified. The repairs will be made at no charge to the customer.

For verified failures between 70,001 miles (110,001 km) and 80,000 miles (130,000 km) on U.S. vehicles, dealers are to provide the customer with an instrument panel cluster (IPC) only. Any additional costs, including labor to replace the instrument panel cluster, will be the responsibility of the customer. Dealers are responsible for the return of the customer's IPC back to the Electronic Service Center

Thank you for using fixya and good luck.

Apr 28, 2010 | 2003 GMC Yukon XL

1 Answer

2005 Yukon XL smells like gasoline fumes


you need to take dealership have your evaporative emission control system check.also check the fuel pressure regulator for gas leak.most of the time the o - ring will leak.cause gas fume smells

Dec 05, 2009 | 2002 GMC Yukon XL

2 Answers

We have a 2005 GMC Yukon. Dealer had car for more


Sound to me your valve guides are worn and letting oil get past the valves and being burnt in the engine,I hope this helps you and thanks for useing use at fixya

Sep 20, 2009 | 2005 GMC Yukon Xl Denali

2 Answers

I have GMC yukon xl 2005 and I got problem on 4 wheel drive.


if i am not mistaking these have the vacuum module on the front differential check it it is probably bad common problem on these trucks from 96 and up if it is the electronic type it could be one of three things the switch on the dash, motor on transfer case, or the electronic module for the 4 wheel drive.

Aug 25, 2009 | 2005 GMC Yukon Xl Denali

1 Answer

Cargo door won't stay up on 2005 Yukon XL


Where are you located.
If you have an AutoZone near you they have a less expensive replacement for the OEM support lifts. If not, you can order them online
at
http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?displayName=Support+Lifts&itemId=152-0&isSearchByPartNumber=&sortType=null&totalPages=[I@a2aa58&currentPage=1&vehicleNValue=&navValue=14300152&parentId=43-0&fromString=&fromWhere=null&filterByKeyWord=&categoryNValue=&categoryDisplayName=Collision%2C+Body+Parts+%26+Hardware&_requestid=1073882

at a cost of about $30 each plus shipping.

Please make sure to rate this solution. Thanks.

Aug 09, 2009 | 2005 GMC Yukon Xl Denali

3 Answers

2005 Yukon XL, third brake light intermittent


Remove bulb, make sure it sits tight in the socket. make sure socket is not burnt up (brown or black in color) Check bulb, if the filament inside is loose or discolored, replace as nesessary. Check brake light switch under driver side dash above brake pedal. make sure it is adjusted correctly.

Jul 23, 2009 | 2005 GMC Yukon Xl Denali

1 Answer

MY 2005 YUKON XL HAS BEEN GIVING ME PROBLEMS!! WE


i would take it to the dealer and put it on their specialized computer, it sounds like an ied computer problem.

Jun 27, 2009 | 2001 GMC Yukon XL

1 Answer

2001 Yukon XL sounds like the starter is dragging


There's your problem. You need to replace the alternator again. Please check out the instructions with the alternator.

And could you please give me a "problem solved" rating -- there should be icons below.

thanks...

Charlie

May 12, 2009 | 2001 GMC Yukon XL

1 Answer

Check Engine light-2003 Yukon XL


you have to take it to a auto part store and they can tell you if there are any problems using a key code and then reset it

Mar 27, 2009 | 2003 GMC Yukon XL

1 Answer

Gas tank wont' fill to specs


Based upon my experience, I would say it's a manufacturing defect. Something in the filler or the tank itself. I've seen cases where the dealer replaced the tank and related parts when this is happening.

Nov 17, 2008 | 2005 GMC Yukon Xl Denali

Not finding what you are looking for?
2001 GMC Yukon XL Logo

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...