Question about 1989 Ford Econoline

1 Answer

Horn wiring diagram need to check out horn it doesnt honk since i changed column

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 1,508 Answers

Might have to remove the steering wheel,and check the earth slider.

Posted on Apr 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On 2002 olds Intrigue, installing new horns but as soon as wires are plugged in horn honks . Removed horn fuse and relay but horn still honks .when pushing horn button ,with no horns, the relay clicks


You may have wires that have become crossed. The wire to the horn and a hot wire have probably lost the outer insulation and crossed each other causing the horn to start honking when it is connected. Check the wires with an electrical tester.

Oct 25, 2016 | Cars & Trucks

1 Answer

2009 GMC Sierra horn started honking on it's own


the split ring in steering column is a ground to horn relay if wire touch ground or pad is compress horn will be active
hope it helps

Mar 31, 2014 | 2008 GMC Sierra 1500 2WD

1 Answer

Alarm horn will not turn off


do you have the alarm option, factory?
there are 2 horns
and 1 horn relay.
if the horn relay is energized, then the inputs to it are bad.
bad input is the horn relay has 12v across is coil pins, all the time.
so unplug the horn wires. silence.
then check relay , now that its quiet. is the coil hot?
hot means 12vdc across it. not thermal hot.
the relay on the 97 can be active for 2 reasons.
1: horn button stuck on, so pull that wire.Gray-org, at column
2: BCM is active same color, C2 in 13 is 0volts. (active)
if the BCM is honking the horn, we ask why, and that be alarm.
im reading at alldata.com so can you , under antithieft alarm sections.
if the alarm is activated, (is it) and any door switch is open, the horn honks.
if the gray-org. wires is at 12vdc , then the relay is bad
shorted, main contacts inside.
if the wire is 0v, its wrong.
ill stop, and wait until you find which it is, bad relay, bad horn button
or bad BCM or bad input to BCM.

Dec 04, 2013 | 1997 Jeep Grand Cherokee

1 Answer

Saturn Keep blowing horn fuse


Could be a short in the steering wheel or column. Or a faulty horn relay.
You may need a wiring diagram to trace the circuits from the relay.
Usually the black wire is the ground and the green is voltage from the relay.

Dec 18, 2012 | Cars & Trucks

3 Answers

Horn honking when car is turned off


have to remove airbag to fix this

Aug 16, 2012 | 2003 Mitsubishi Lancer

1 Answer

Horn honks 3 or 4 times when starting the car. it is a 2009 chrysler seabring


Check for loose wiring or exposed conductor particularly inside the steering column where the horn and the ignition wiring may have come in contact.

Sep 15, 2011 | 2009 Chrysler Sebring

1 Answer

Where can I find my honk sensor in a 2006 Ford Focus? or How to fix my honk in a 2006 Ford focus? The honk is not working?


I believe there are 2 wires to the horn. One is power all the time, and the other is ground through the steering column wire to the horn button on the steering wheel, when it grounds out when pushed.
If it is a single wire to the horn, then there is a relay.

May 05, 2011 | Ford Focus Cars & Trucks

1 Answer

Can not honk horn on steering wheel 95 s 10 fuse is good and horn works if connected to battery


The horn button on the steering wheel grounds out to complete the curcuit .Check the .If wires are intact ,you might have a broken wire in the steering column.

Apr 23, 2010 | 1995 Chevrolet S-10 CA Edition

1 Answer

99 malibu horn honks shifting into D or R


wires from the horn run down the steering column and pass the area where the shift linkage is also in the column. its either a loose wire, or a chafted wire inside the column. Be VERY careful working on this if you have airbags. they must be disarmed before you work on the column.

Mar 07, 2009 | 1999 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...