Question about 1996 Jeep Grand Cherokee

Open Question

96 JEEP NO OVERDRIVE

96 GRAND CHEROKEE 4.0 W/ AUTO OVERDRIVE, OVERDRIVE SWITCH DOES NOT WORK, IT SLIPS FROM FIRST TO SECOND WHEN ACCEL. SLOW BUT SHFITS FINE WITH QUICK TAKE OFF IS THERE AN EASY AND CHEAP FIX OR REMAN OR SALVAGE YARD

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: 1994 JEEP GRAND CHEROKEE-TRANSMISSION "SLIPS" ON TAKE OFF.

First of all make sure you are checking the fluid right. Some people do not know that in order to check transmission fluid the engine needs to be running and the temperature needs to be sort of warm althought you should be able to get a good Idea just by the engine running. In this instance you might have a governer valve that isn't properly working to shift the engine when hydraulic pressure reaches a certain PSI. I would suggest having it flushed and put in new fluid and filter. If this doesn't work the problem is more serious and might need some professional assistance.

Posted on Oct 14, 2008

Ad
  • 2 Answers

SOURCE: 94 jeep grand cherokee will not shift into overdrive

My 97 Jeep Grand Cherokee was doing the same thing. I changed the TPS ( Throttle Position Sensor) Now it is great goes into overdrive fine. It is really easy to change.

Posted on Feb 11, 2009

  • 79 Answers

SOURCE: 4l60e Shifts into 1 and 2 then slips drasticly< rpm

This is the typical transmission failure on these. You need a rebuild. The 3/4 gears clutches are burnt up.

Posted on Jan 10, 2010

  • 1 Answer

SOURCE: 96 chevy blazer 3rd gear and overdrive slipping

i got a 1996 chev. blazer s-s10 4.3 engine 4x4.problem i got is i got 1st 2nd & overdrive & reverse but no 3rd gear what should i do

Posted on Jan 19, 2010

  • 6982 Answers

SOURCE: My 1995 Jeep Grand Cherokee transmission slips in overdrive

sounds like a possible shift solenoid. If it's due for a fluid change, do that and add a container of lucas trans conditioner. Likely you have a drain plug on the pan so if the fluid was recently serviced, just drain a quart out and replace with the additive, then top off.
If the condition does not change within a week, likely you will need better diagnosis from a reputable trans shop.

Posted on Jun 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 jeep grand cherokee is stuck in second gear, the overdrive button is not functioning, and getting the data control center says service 4wd switch


wow no engine size stated, the 5.2L run a special trans... so....
hopeless to help you much.
zj jeep with automatic.
it didnt lie, it told you to service it, so take it to a shop and let the work on this old dog..
stuck , now what does that mean.
the shift lever lever stuck, or its cable failing end to end.? or?
or shifts from 1 to 2 and hangs there.
or down shifts from 3 to 2 and and hangs there
DIY ? question is that it? you never said intentions.....
so we open the 93 ZJ book and what do we see.
ax-15 stick box, seems not.
the aw-4 auto , electronically shifted with TSM (scan it yet?)
and the 46RH auto. used on the 5.2L, has no TCM brain.
its a Hydramatic.
here are the OD words off the 46h page

Overdrive Control Switch
The overdrive control switch is located in the instrument
panel. In the On position, automatic shifts
into fourth gear overdrive will occur. In the Off position,
the switch overrides the powertrain control module
preventing a shift to overdrive fourth gear range.
The switch has an indicator light that illuminates
when overdrive is turned off. The switch also resets
when the ignition key is turned to the OFF position
so that the automatic overdrive feature is restored.
The use of fault codes is employed to help diagnose
the electronic components that operate the overdrive
unit and torque converter clutch.

Jul 16, 2016 | 1993 Jeep Grand Cherokee

1 Answer

1996 jeep grand cherokee transmission slips in 2nd and drive


Drain fluid into a clean plastic bowl, check for brass cuttings or metal shavings in sunlight. If present get complete trans overhaul.

Oct 21, 2012 | 1996 Jeep Grand Cherokee

1 Answer

97 grand cherokee tsi shifting problem


Sound lik e aaproblem with Torque Converter, check engine light come on there? I suggest scanned the PCM in order to know fault codes stored there. We have the repair manual, send us details for additional questions.

Jul 02, 2012 | Jeep Grand Cherokee Cars & Trucks

1 Answer

2002 Jeep Grand Cherokee Limited P0846 code



Trouble Code: P0846

A/T 2/4 Pressure Switch Circuit Malfunction
Possible Causes:


2/4 pressure is incorrect, or internal transmission faults exist 2/4 pressure switch circuit is open, shorted to ground or power 2/4 pressure switch is damaged or it has failed TCM relay power circuit to L/R switch is open (loss of B+) PCM/TCM has failed

May 16, 2012 | 2000 Jeep Grand Cherokee

1 Answer

My 1995 Jeep Grand Cherokee transmission slips in overdrive


sounds like a possible shift solenoid. If it's due for a fluid change, do that and add a container of lucas trans conditioner. Likely you have a drain plug on the pan so if the fluid was recently serviced, just drain a quart out and replace with the additive, then top off.
If the condition does not change within a week, likely you will need better diagnosis from a reputable trans shop.

Jun 03, 2010 | 1995 Jeep Grand Cherokee

1 Answer

My 94 jeep grand cherokee goes in and out of overdrive while driving and its hard time shifting and my oil presure gauge is maxed out while this is happening what my problem?


that sounds like two different problems...transmission going in and out of overdrive, sure sounds like transmission is slipping...Take that to you mechanic to have them positively identify that...oil pressure maxed, might be a faulty gauge just pinned to the max point as well...does the oil gauge work when you drive......?

Nov 18, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Power Loss


not camshaft sensor get transmission oil checked

Jul 29, 2009 | 1991 Jeep Cherokee Briarwood

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...