Question about 2007 Chrysler Town & Country LX New Cars
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: door locks
Daughter had same problem on '05 T&C. Neighborhood mechanic searched Internet and found 80-90 others with same problem right around 40,000 miles. Free solution was to pull yellow 20A IOD fuse in right front corner of fuse box under hood, wait 10 seconds, then reinsert fuse. Should solve problem as long as you don't lock doors with FOB. You can unlock doors with FOB, but apparently locking with FOB causes the problem.
Permanent solution is to have dealer reprogram computer for around $50 which is what my daughter chose to do because of inconvenience of not being able to lock doors with FOB when getting baby/carseat out of vehicle.
Posted on Dec 07, 2008
UNLESS YOU HAVE A MACHINE TO RECHARGE THE A/C THEN DO NOT ATTEMPT TO PLAY WITH A VERY DANGEROUS SYSYEM. This is a specialised piece of kit and without the right machine to do the job you could end up with serious injuries
Posted on Jun 30, 2009
I would be looking at a shorted blower resistor it is located behind the glove box on the HVAC housing. Prob the switch contacts with a 12 volt test light if the bulb intesity does not change the blower resistor is bad. The resister is at fault about 99% of the time.
Posted on Aug 29, 2009
I have a 2005 Chrysler T&C. The turn signal would not work at all or activate incorrect side. The switch is easy to remove as described by dukecityman.
Once the switch is of, it has four screws holding it together.I took this apart to find that there was a circuit-board which was contaminated with dirt. wiped it of, put it back together, working fine.
If you take it apart use caution. there are parts on the "top" which will fall out. ( they go right back in) The circuit-board is on the "bottom" half. You really only need to take this part off. (less moving parts)
Your going to replace it anyway, whats the harm?
Posted on Jan 28, 2010
Tips for a great answer:
Nov 14, 2015 | 2003 Chrysler Town & Country
Sep 19, 2014 | 2009 Chrysler Town and Country
Oct 03, 2012 | 2007 Chrysler Town & Country LX New Cars
Jun 02, 2010 | 2005 Chrysler Town & Country
Nov 14, 2009 | 2007 Chrysler Town & Country LX New Cars
Sep 21, 2009 | 1999 Chrysler Town & Country
Jun 20, 2009 | 2005 Chrysler Town & Country
Jun 01, 2009 | 2001 Chrysler Town & Country
Apr 20, 2009 | 2004 Chrysler Town & Country
43 people viewed this question
Usually answered in minutes!