Question about 1997 Mercedes-Benz C-Class

1 Answer

I have a mercedes c 230 1997 and i have problems

I have a mercedes c 230 1997 and i have problems whith no stop light,brake light,ac only worcks for a minute and then it stops

Posted by on

  • lazonyx Jun 28, 2009

    hi where is the evaporator sensor,what is the amount freon for the system,i dont have the manual for the car



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 408 Answers

Hello,good day,for your brake light,check your fuse,then your brake light switch ,for your ac problem,maybe your evaporator sensor ,amount of freon in the system,or your system is overheated,try to check your auxiliary fan or condenser fan for working,ty

Posted on Jun 28, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to stop beeping

Sound sleek you have two problems. Check your brake fluid level immediately for the beeping and brake light on!
The check engine light is a completely different story.
I recommend you take it to a shop.

Aug 23, 2014 | 1998 Mercedes-Benz C-Class

2 Answers

Brake light switch

tails lights are the GLOW when the headlights are pulled one cluck or 2, tails are also parking light (one click)
stop lamps HAVE nothing to do with that,
he never said but implies, the brake lamps are dead.
but OP, try posting what is dead, and not mix TL with BL.

my tails lamps are out , whith head lamps on.
when i brake , both stop lamps are out.
this will help.

Oct 08, 2013 | 1995 Jeep Wrangler

1 Answer

In less than 6 mothns, my mercedes 2006 ML 350 has been giving me a brake problem. I get too much play when I push the brakes, meaning I literally have to pound my foot all the way down to get it to stop....

If you mean that the brakes are hard to push but the pedal still only travels its normal distance then:
This is either a brake assist valve. A brake booster problem, or the vacuum line that feeds the brake booster.

If you mean it goes way to the floor before it stops you then you have a bad master cylinder or some air in a line.

I'll assume you don't have any warning lights on.

Aug 31, 2011 | 2007 Mercedes-Benz ML350

1 Answer

AC, Pover dor ,breck light gon`t of and signal wen yu ferget light don`t worck.

check brake fluid and top up with brakefluid light will go out

May 17, 2011 | 2001 Honda Civic

1 Answer

My Electronic Ignition Switch of model E-230,1997 is damaged please tell me the price of new Igntion switch

Over the internet you can get an ignition switch for your vehicle from $23 to $50.00 depending on where you buy from. If you go to the dealer add three times that much onto the price.

Apr 09, 2010 | 1997 Mercedes-Benz E-Class

1 Answer


hello i have a mercedes-benz e240 class model 2003, i have a big problem... ihave a allarm light whith this Specifications: Malfunction, Electrical Consumers switched Off. whould you please help me. thank you

Feb 09, 2010 | 2000 Mercedes-Benz E-Class

4 Answers

Where is located brake light switch on actros 1840?

Most brake light switches are mounted to the upper area of the brake pedal arm, and are held in place with a pin or clip.

Dec 12, 2009 | Mercedes-Benz Mercedes Bentz Actros Semi...

1 Answer

No brake lights and no cruise control. fuses are good and lights are good. taillights work and the blinkers work. what's the problem?

in stop pedal youll see the stop light switch,remove the botton cover and you will find it,check it whith a test light,it should be normaly open,so one side power and the other ground,depresed power in both side ok,GL

Nov 25, 2009 | 2006 Isuzu i-350

1 Answer


For rear pads rear rotors changing procedure you need lift up car,secure front wheels, disconect rear wheels from rotors,(if you missing the bolts try drill it whith portable electric drill at first smal drill 3 mm diameter,then 10 mm diameter.)Disconect the hydraulics breake cylinders cearefully putt it on plate not tears the house.Change beake pads.Unscrew the rotor whith hexagonal wrench.Setup the hand bracke clearance.Putt agan the rotor on rear axis.Assembly the breake cylinders ,and wheel tighening 110 Hm.

Mar 07, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

Not finding what you are looking for?
1997 Mercedes-Benz C-Class Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

80531 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides