1993 Mazda 626 Logo

Related Topics:

A
Anonymous Posted on Jun 19, 2014

Ford telstar 2.0l 1993 automatic not selecting 4th gear

Not changing to 4th gear automatic gearbox

5 Related Answers

Anonymous

  • 315 Answers
  • Posted on Mar 03, 2009

SOURCE: front wheel bearings 1993 Ford Telstar Station wagon

Will this do?
http://www.autobookworld.com/shopexd.asp?id=2793

Ad
darkoh69

danny

  • 77 Answers
  • Posted on May 11, 2009

SOURCE: auto transmition wont go into 3rd and 4th gear

I had the same problem I changed the transmission fluid & put a new filter in the trans, this fixed it good until I put my foot down to overtake the trans kicked down to 2nd gear & the hold light started flashing again & the trans started slipping again. I stressed over it for a day or 2 & then I took it out for a drive & thrashed it, Low & behold it came right. When you change fluid its impossible to get all the old fluid out because the torque converter holds a liter or two under pressure, so when I put my foot down some of the gunk blew through & blocked the pump it looses pressure & cant change gear. You need to get it flushed by a transmission specialist   

Hrnsly

Romy Kettlewell

  • 154 Answers
  • Posted on Aug 03, 2009

SOURCE: 2004 mazda3 wont shift into 4th gear

Sounds like it needs a transmission. Try JDMengines.com

Anonymous

  • 1 Answer
  • Posted on Jan 04, 2010

SOURCE: gear box is stuck in 4th gear on my mazda e2200

check the linkages (rods connecting stick and gearbox) my e2000 is also stuck in third mechanic friday then ill post my discoveries

cy schousboe

  • 2002 Answers
  • Posted on Feb 27, 2010

SOURCE: tx5 xri auto . no top gear and flaring between

You need to get that oil out of there right away, especially if it has a burnt smell. Change the filter and gasket at the same time and pay attention to what comes out of the oil pan when you do this. Filings in the trans oil are normal wear and tear but pieces aren't. Add a bottle of a trans additive to extend life, I've had good luck with Lucas. If the trans is still acting up you will have to start looking for a replacement although you can add a second bottle of Lucas, if that is what you use, to help get you by until you can repair properly. Hope this helps.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

Toyota Corolla 1.3 Esteem 2014 model, I am having problems with the selection of 4th gear at certain times only,

no country told. Esteem is not really the true makers name.Called SUZUKI but.

no 1.3L here.USA
you said 4th fails but what about 5 and 6 gears?

this Esteem is a Toyota Corolla badge'd as Suzuki. << so manuals on toyota show this.
I think Corolla are listed as the most cars by brand ever made. so documents are easy. find and I did.

called the EC65 transmission.

well checking linkage problems is first and levels next.
it is twin cable complex shfit cable set. both end must be good, and adjusted.
the manual shows the calibration to the ends (the are threaded swivels), these steps are tricky and
not reading the manual will not ever be done correctly


if you run it low on GL4,? the box will be damaged.
why not have shop check it out. and do lube change.
missing parts are not good ever. these were not optional. there.
now inside the box what could be wrong. well
the shift forks are failing for 4th

the lever lever tip bad
forks bad inside box and or shift fork real detent balls missing, bad service cased.
or bad 4th gear lock up dogs or synro ring.
the car has service manual to read. that covers this transmission,

I found it. filler , level check in the FSM

"TOYOTA Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"


GL4 is what it is, the most common man. tranny lube on earth, used for DECADES now.


2014-ppigzcfsb332jjjwfoxiazo2-d-0.jpg the manual is here


https://eautorepair.net/Checkout/ActivationPlan/2014/Toyota/Corolla
1helpful
1answer

Mazda bravo b2600 gearbox growles and grumbles. cant select 2nd or 4th gear. 1st, 3rd,5th &amp; reverse ok.

I am sorry to tell that the gearbox need to have some major repair. It is also not advisable to continue driving as the gearbox can breakdown completely leaving you stranded. At least one the cluster drive gears in the gearbox is damaged (gear tooth stripped off) that will result in that only some of the gears being able to be selected. The broken off tooth are still in the gearbox and due to the oil movement in the gearbox it can be "washed up " in between to engaged gears destroying those as well. This will happen up to the point where there are no gear selection at all.
0helpful
1answer

Hello, My 1994 BMW 740i is not shifting into 5th gear on automatic mode, it happens after it being driven for while and is warm, when cold it shifts gear till 5th gear normally, when it gets stuck on 4th...

IMO it's more likely that you have the wrong grade of ATF. It's very important to have the correct grade. The following site shows this:
http://www.nairaland.com/1364064/automatic-gearbox-problems
each car manufacturer has recommended grades of Automatic Transmission Fluid, BMW is no exception. the following website for BMWs may bring you more accurate data:
http://www.nairaland.com/1364064/automatic-gearbox-problems
Apparently CTSC is the supplier for BMWs via the web.
Generally auto gearboxes have drain plugs and filler plugs to enable oil change in routine maintenance. But I would definately go back to the garage where you had the last service and ask politely about the grade of ATF used, before considering an 'oil change'.
Good Luck
0helpful
2answers

2004 Ford Mustang Manual Transmission issue

Your clutch needs adjusting and your gear synchronizers are not working properly.
1helpful
1answer

Auto won't down shift when o/d button is pushed

This button only makes the gearbox change from 3rd to 4th or 4th to 3rd, will not down shift in any other gear, make sure it is in 4th gear, usually above 60km, than press o/d off it should go into 3rd gear, if it does not than see a automatic specialist, it is usually a sensor, if you go to Toyota they will charge you a fair bit.
1helpful
1answer

In 2008 first 4th gear and later 2nd and 4th gears kept jumping out. I was told that all the bearings and other components inside the gearbox were worn out so Ihad them overhaul the gearbox. A few months...

a gear box place should know more than me but this can also be caused bye a little ball bearing and spring .... these 2 things push on the selecter shafts and fit in to a groove that holds the shaft in the right spot .. that is what u feel when u change gear and it stays in position ....... the spring - springs can looz tention .. brake or the ball can wear or the groov it sits in to can do the same making it not hold in position ... 2nd and 4th are prob on the same shaft and this problem useully happens under load or taking off quick ........ i think they call them retainer springs and ball
0helpful
2answers

Where is the engine number on a 1988 ford telstar sedan

Where is the engine number on the 1993 Ford telstar 2.5 v6
1helpful
1answer

Isuzu automatic gearbox doesn't shift for 3rd 4th gear

did you change your clutch when you changed your gearbox??? also check the clutch master cylinder.
0helpful
1answer
1helpful
1answer

156 2.0l x reg. unable to select 4th gear, lever will not move into gear. engine running, stopped, just baulks when trying to select.

syncronizer for 4 gear total damaged it happens you need to open gearbox and change the syncro bearing for 4 th not very expensive dont change the gearbox
Not finding what you are looking for?

237 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...