Question about 1992 Honda Accord

1 Answer

I have a 92 honda accord. I recently got the water pump replaced, it was pretty expensive, after that I kept hearing a grinding noise when I sped up, last night I started overheating and the car is now leaking water constantly, from around where the water pump is located. I havent taken it apart yet to physically see it... Is there anything else it could be? why would the pump blow so soon after replacing it?

Posted by on

  • hayloe Jun 27, 2009

    well would I have to replace the whole pump again or just the bearing?



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Water pump bering mayb cus timing belt tensioner eas not set proply

Posted on Jun 27, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Brief grinding noise after cranking

Don't worry about that it normal the ECU is program like that when it too cold ,the engine need a rich mixture of fuel that why you hear that noise,when it is already started then you don't hear it anymore,hope that clear your mind.

Feb 03, 2010 | 2009 Honda Accord

1 Answer

I have 1992 Honda Accord. Upon release of the

sounds like you may need just a simple brake pad replacent job. have you checked the thickness of the pads?

Jun 21, 2009 | 1992 Honda Accord

1 Answer

Motor using water and wanting to over heat?

It sounds like the pump, if it is leaking from the water pump, you should stop driving it right away as the pump is driven off the cam timing belt and if that comes off, major damage to the engine will occur. There is also a balance shaft belt under the timing cover, it should always be changed with the timing belt when the water pump is replaced.

Apr 09, 2009 | 1992 Honda Accord

1 Answer

1998 Honda Accord water pump problems

only can replace to fix bearing in pump bad

Feb 23, 2009 | 1992 Honda Accord

2 Answers

Water pump

if there are no leaks, then will be a grinding sound

Dec 31, 2008 | 1992 Honda Accord

1 Answer

92 Honda Accord LX auto Trans

Normally when u have a TCM problem, what the car do is hard to change gear, but if your is slipping you will have to do something to you transmission, replace or rebuilt it, good look

Nov 01, 2008 | 1992 Honda Accord

2 Answers


if you go to your local library most do carry the manuals and you can copy the info you need.
difficult.. yes. extremely
if you decide to do it make sure you use 1/2 drive breaker bar on crank pulley if your lower timing cover cannot be moved far enough to access the water pump mounting bolts. also make sure you don't turn the timing gear when removing the belt or replacing it.
hope this will help you.

Sep 22, 2008 | 1992 Honda Accord

Not finding what you are looking for?
1992 Honda Accord Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides