Question about 1994 Hyundai Excel

2 Answers

Hyundai excel. Engine revs stick at 1500rpm then gradually drops to 750rpm when you stop at a junction. A quick tap of the gas pedal causes it to drop. The throttle cable is free.

Posted by on

  • Anonymous Mar 17, 2014

    car stops when revs drop below 1500rpm what is the problem?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Throttle Position Sensor (TPS).

Posted on Jun 28, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 167 Answers

I would check the auto choke linkages to see if they are sticking.....
Does if run rough when hot(running Temp)?

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced fuel pump but still revs up the engine and shuts off?


There is gas, the starter is fine, the battery is good. It doesn't matter what temperature the engine is or how long between starts but if I rev up the engine while cranking it starts okay. Rarely I have to rev at stops or the idle drops too low and stalls. If I punch the gas very quickly it revs and drops quickly and then stalls. Starting has a success rate of about 50% without revving. If it stalls, I must rev the engine to start.

Jan 10, 2017 | Cars & Trucks

2 Answers

Car doesn't seem to get enough gas to engine


Have you done a tune lately on the car?
I would also suspect a fuel pump problem is you've done a tune up recently.

Jul 11, 2008 | 1994 Hyundai Excel

1 Answer

Jaguar will not


Try the "clear flood" method. Hold gas pedal to the floor and crank the engine over till it starts and builds rpm and make sure you release the gas pedal in time so that you don't over rev. the engine. Then feather the pedal trying to maintain 1500rpm for one minute then let idle .

Dec 21, 2013 | Cars & Trucks

1 Answer

Gas pedal sticking


spray wd40 on both ends of the throttle cable-at the peddle and at the throttle body-penetarting oil displaces water which may be causing the freeze-up- cheers Denny

Nov 26, 2013 | 1998 Isuzu Trooper

2 Answers

I have a 03 tiburon gt 2.7 and when you hit the gas the engine revs up to about 3100rpm for about 10 secs the drops down to about 1500 and surges up and down form 1500rpm to 2000rpm then it will idle...


its gonna be your clutch i had the same problem, when i floor it the rpms would go high then drop and take off i replaced it and it runs fine know

Feb 13, 2010 | 2003 Hyundai Tiburon

1 Answer

How do you tell if a automatic hyundai excel gbox is slipping


If you step on the gas and the engine accelerates but the car doesn't then that's slippage.

If you press the brake at a stop while you step on the gas you can determine the stall speed of your torque converter, if the engine revs beyond the stall speed then it's the torque converter clutch, TCC clutch solenoid, or a bad converter. Otherwise you need a professionals help.

Nov 22, 2009 | 1994 Hyundai Excel

1 Answer

Tapping noise is intermitent, have been advised that it may be EGR valve ?


Hi,

This could well be the Vacuum pump tapping,(if you have a 5 cylinder diesel engine)

If the tapping seems more pronounced at tickover/low revs,
A quick check is to repeatedly press the brake pedal when the tapping is present (and gradually returns then the culprit is indeed the vacuum pump.

If it really bugs you then just get a new one, or just put up with it until the servo performance starts to degrade.

Cheers.

Nov 05, 2009 | 2005 Volkswagen Microbus

2 Answers

Need a 1996 1500 chevy 305 EXPERT!!!! ONLY!!!


Take an analog ohmmeter, remove connector from TP sensor, and touch probes on terminals of sensor, try combination of 2 until you see reading increase as gas pedal pushed & decrease as pedal released by someone, while engine off, and key off.. Have them slowly, & gradually push pedal, as you watch meter. Reading should increase slowly & gradually as well. If you see it climbing, then quickly drop off, then jump back up, it's faulty. Try to concentrate more on the position of gas pedal where you experience the engine cutting out. Costs nothing to try it.

Oct 16, 2009 | 1996 Chevrolet K1500

Not finding what you are looking for?
1994 Hyundai Excel Logo

Related Topics:

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...