Question about 1998 Dodge Ram 1500 4WD

1 Answer

Dodge ram 1500 5.9L jurky when you drive

Truck starts and runs fine at idle change 50 to 80 rpm at idle excelerates fine but when you try to run at a constant speed it gets rky. I have changed crank p.s. cam P.S. throttle P.S. Plugs, res, Dist cap, rotor ,trans filter, and checked for vacume leaks and inlet gasket leaks I need help!!!

Posted by on

  • jan8313 Jun 27, 2009

    how do you chech the back pressure before the cat. The truck only has 1 O2 sensor and it is after the cat.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 721 Answers

Check the exaust backpressure before the cat converter. Should be less than 1lb. Write back.

Posted on Jun 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1997 dodge ram 1500 4x4 abs light on runs fine idles good but put it into gear wont go past 35 mph engine running smooth even at 35 mph


Bernard's Blog: Dodge Transmission Output Speed Sensor

bernardsblog.blogspot.com/.../dodge-transmission-output-speed-sensor.h...
Sep 8, 2009 - My 99 Dodge 2500 Ram won't accelerate..transmission is NOT slipping,.... It has been running fine and the check engine light even cleared itself yesterday.... So it wouldn't go into first gear and then 3 minutes later my check engine ... I have a1997 Dodge Ram 1500 with a 5.9L instead of the stock 5.2L. It ...

Dodge Ram Idle and Stalling Problems - Car Forums at Edmunds.com

forums.edmunds.com > Dodge > Dodge Ram Pickup 1500

Aug 17, 2011 - 30 posts - ‎25 authors
Learn more about Dodge Ram Pickup 1500 at the Edmunds.com ... The crank sensorwas put on however it started stalling again. ... The truck starts fine, but will only runat 2000's RPM and only then if .... Then as I start driving about 1/3 of a mile go dead again, I knockout of gear, crank back up immediately.

WILL NOT GO OVER 30MPH WITH PEDLE TO METAL ...

repairpal.com > Questions > Dodge > Charger > 2006 Dodge Charger
I WAS DRIVING FINE AND THE CAR ACTED LIKE IT GOT STUCK IN ... Then the transmission didn't want to change into 2nd gear. .... Whenever i start up my car theabs and esp light turn on and when i try driving it doesnt go over 30 mph even .... in neutral but not it just wont go up hills and i think it has something to do with

Jan 07, 2016 | Dodge Cars & Trucks

2 Answers

My 1996 dodge 1500 with a 318 will not idle why is that?


stop and idle stops, starts right back up and runs fine with a few rpm

Jun 28, 2010 | 1996 Dodge Ram

1 Answer

1998 dodge ram pickup 318 eng. engine idle rough on warm-up engine idle rough after warm-up shutting off engine and starting back up engine also runs sluggish in over drive at a low idle. I have...


If the engine seems to run fine over 1450 RPM maybe there is a vacuum hose leaking or EGR valve is slightly stuck open. Any help from the OBD II trouble codes? Or is there simply no MIL and no stored information in the OBD II computer read at the local parts store through the connector by the drivers knee?

Dec 04, 2009 | 1998 Dodge Ram 1500 4WD

3 Answers

88 dodge ram charger 5.2 ltr engine....intermittant spark


I have a 1988 dodge ram charger with a 318 motor with throttle body. It runs really good when I start it up and drive it for about a half of an hour.
But after that when I step on the throttle a little bit, it hesitates. If I let off a little bit, it will go or if I really step on it, it will go also, but if I just hold it there, it really hesitates If I stop, the idle jumps up and down so much it causes itself to stall. It seems to only do this at low RPM's. If the RPM's are higher it's fine

Jul 02, 2009 | 1988 Dodge Ramcharger

1 Answer

2001 Dodge Ram Magnum 360 gas stalling also!


1.Start by changing plugs and wires. 2.Check for vacuum leaks. With the engine running, wigglr every hose you can see, to make sure nothing is loose or cracked. 3.Change fuel filter. 4.Check timing. 5.Check air control valve. 6.Check idle control sensor.

Jun 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

1999 Dodge Ram erratic idle


Try a throttle positioning sensor??

Oct 19, 2008 | 1999 Dodge Ram

11 Answers

99 dodge ram 1500 5.2 liter stalling on start up.


Check and clean idle air control valve
check for vacuum leaks
suspect idle air control valve

Sep 11, 2008 | 1999 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...