2011 Ford Flex Logo

Related Topics:

A
Anonymous Posted on Jun 18, 2014

Ford Flex Radio Not working

Radio not turning on but power is sent to unit

4 Related Answers

Anonymous

  • 108 Answers
  • Posted on Mar 27, 2009

SOURCE: Radio has no power

check radio and cig lighter fuse

Ad

Anonymous

  • 580 Answers
  • Posted on Jul 07, 2009

SOURCE: 2001 Ford Focus - radio turns on and off. Power

You either have a loose power connection, or have upgraded your stereo speakers and have not grounded them properly or they are drawing too much power and may need an amplifier

tuyen bui

  • 1025 Answers
  • Posted on Feb 27, 2010

SOURCE: which wire is constant power 4 radio in a ford focus

all you need is a test light
turn your ignition off
check all the wires with the light
there is one wire that has power
that's the memory one
then turn the key to the second knot
check for the next one that have power
that's the one that will power up the system

Anonymous

  • 26 Answers
  • Posted on Mar 27, 2011

SOURCE: my 2001 ford escape"s radio, lighter and power

you had a short in wiring harness,or wiring is broken and trying to make contact.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2010 Ford Flex. Reset code for my radio in 2010 Flex please.

Question edited for clarity.
Question moved from Sony Television

Nothing to do with the fuses. This is the three ways to get the code.

https://www.fixya.com/support/r29874205-need_vehicle_radio_code

..
0helpful
2answers

Hi my Ford transit custom radio won't turn on after flat battery I've checked all fuses ?

You need to input the radio security code, when battery power is lost the radio goes into theft lock.
0helpful
3answers
0helpful
2answers

Turned radio off then battery died, got vehicle fixed but no power to factory radio, all fuses check as good. Is there a trick to getting the radio to turn on again?

when the battery dies or is removed , the anti-theft code of the radio kicks in and the unit will not work again until a special code for that radio is reinstalled
the code could be in the user manual in the radio use section ,or there are sites on the net that may have the code for you
0helpful
2answers

Idk why my radio doesn't work i re hooked it up but it wont turn on?

If it is a stock radio from the auto manufacturer it has probably gone into security mode. This happens when power is removed from the radio, such as during removal and replacement or during battery replacement operations. This is a security feature to discourage radio theft. It is generally a PITA. You need to check with Ford (or a local dealer) to determine what information you need to obtain to get an unlock code for the radio. Then follow the instructions given to release the radio for operation.
0helpful
1answer

Ford Ranger radio wont work

You need to enter the ford audio units security code into the audio unit. Because the battery was out for a long time, the audio unit has forgotten its security code. The code is in the manual that came with the car.
5helpful
2answers

My 2003 ford taurus gas gauge doesnt work took it to get the emissions done and the car failed they told me it was the fuel sensor where is the sensor located and is it expensive to fix

is it a flex fuel vehicle? if so it's usually the flex fuel module, logated behind the radio and slightly to the left. get a set of radio removal tools(two u shaped wire tools and fairly cheap) remove radio and replace module (also fairly cheap)
0helpful
2answers

My radio is not working

Check the fuse for the radio to start.
Does the radio display light up at all? Does putting in a CD or tape turn the unit on?
If the radio doesn't turn on, it may be a bad power switch if the above doesn't work.
1helpful
1answer

Radio

Sounds like the head unit is bad on your audio system. You would need to replace the entire unit. I'd recommend an aftermarket stereo instead of another Ford stereo.
1helpful
1answer

2002 explorer radio not working

From LustyKid:

Steve:

Suggest you read th manual on the radio. Some radios you have to push in the on off button until the enter code window appears.

In other words push in to turn radio on and hold it in that position until the code window appears in the screen. Then enter code.

Never heard of disconnecting the battery to clear the code. All that does is tells the radio that an attemp was made to steal it, thus regenerating the lock 10 code. What it does clear is the ECM Module codes. Who was the dumbwit at the dealer that told you that? He needs to be sent back to school.
Not finding what you are looking for?

1,482 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...