Question about 2001 Dodge Caravan
I need to find the location of the speed sensors on a 1996 town and country. If any one has any pictures or diagrams that would be so helpful. Thank you
The speed sensor is on the tailshaft of the transmission,on the passenger side of the car,it has 3 wires. The output sensors are located on the front of the transmission about mid-way up the housing & only have 2 wires. Note the output sensors are not responsible for vehicle speed. Only the output shaft speed is recorded. They are for finding the correct cvi(clutch volume index) only. If you have a cvi issue,the transmission is toast.
Posted on Jun 26, 2009
If you have a 4 speed unit, there is an input speed sensor and an output speed sensor on the transmission.both of them (2 wires sensors)can be seen from the front of the vehicle, of course under the hood :)
the output sensor is the 2 wires sensor on the left side of the vehicle.Don't foeget to replace the connector!
Posted on Aug 14, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The input and output speed sensors look identical on the connector side. The one over the solenoid pack is the input, the one closer to the left frame rail or left front wheel is the output sensor. I hope this helps.
Posted on Apr 26, 2009
It is located on the front of the transmission. you will see 2 of them one on the left under small transmission lines it is the input then to the right behind the radiator overflow there is the other one. Easiest way to change them is with a 1" deep well socket
Posted on Jun 02, 2009
A 3 SPD TRANS DOES NOT HAVE INPUT/OUTPUT SENSORS..ONLY A VEHICLE SPEED SENSOR..IT IS LOCATED ON TRANS EXTENSION HOUSING WHERE RIGHT SIDE AXLE COMES OUT OF TRANS..1 BOLT AND A WIRE CONNECTOR
Posted on Jul 19, 2009
According with repair manual, output speed sensor is located on the
Transmission, generally positioned over the park gear and monitors
transmission output shaft rotating speed; check some details in the next
Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.
Thank you for using Fixya, and have a nice day.
Posted on Oct 27, 2011
Tips for a great answer:
Apr 20, 2015 | 2001 Chrysler Town and Country
Jan 04, 2013 | 2002 Chrysler Town & Country
Jul 01, 2010 | 1996 Chrysler Town & Country
Dec 13, 2009 | 1996 Chrysler Town & Country
Jun 11, 2009 | 2001 Chrysler Town & Country
Apr 26, 2009 | Chrysler Town and Country Cars & Trucks
Aug 23, 2008 | 2001 Chrysler Town & Country
Jun 17, 2008 | 1996 Chrysler Town & Country
3,329 people viewed this question
Usually answered in minutes!