Question about 2004 Honda Civic

1 Answer

My mant req light is on. they set it to come on every 10,000 miles so i can take it in for work that i cant afford. all i need is a code and the light will go off. any idea what that might be?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

The maint. required light is for oil changes there are about 4 different ways that honda has to reset these and it deoends on the vehicle. So try these. Push in the trip reset button and hold it down while turning the key to the ON position(no start) hold it down till the light goes out. If there are two buttons on the left side of the dash that say SEL and TRIP turn key to ON then hold both buttons at same time, when light flashes let go and hold both down again till light goes out. If these don't work, youre owners manual will say or take it to your local oil change place, they should know how to reset it also

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do reset the maintenance light on my 2013 prius


you need to hook it up to a scanner to reset it

Oct 30, 2015 | Cars & Trucks

1 Answer

1997 isuzu rodeo speedometer/odometer quit working, check engine light on


I suspect that the TCM is playing up but without a proper code reading it is difficult to say. Why do you not take it to autozone as they do scanning for nothing.

Mar 30, 2014 | 1997 Isuzu Rodeo

1 Answer

Turn off 10,000 mile eng light


Is it the Maintenance Required light? If so, Turn your car off - hold in the odometer and turn the key half way on. Hold for about 4 - 5 seconds. Your odometer should start blinking and your light should go out.

Jul 21, 2012 | 2006 Toyota Corolla

1 Answer

How I can erase mant req light


trythis. With key off push and hold the trip re-set. Now turn the key to the on,not start, position. This is how it's done on my "04" toyota. Hope this helps

Apr 16, 2011 | 2006 Toyota Corolla

1 Answer

Service req. light stays on in 08XB?


KEEP PRESS THE MILE RESET SWICH.. AND OPEN THE IGNITION SWITCH FOR 5 SECONDS..

Aug 07, 2009 | 2008 Scion Xb

1 Answer

Mant Req reset ligth


Hello, My name is JShreader. Thank You for choosing fixya.com.

There is 2 ways to do this on this year model...depending on the Month the vehicle was manufactured. 1 is using the Key Slot on the Cluster (on the earlier models). You can do this by inserting the ignition key into the slot located on the front of the instrument cluster lens. When reset, the indicator's colored tab will return to green.

The other way (on the later models) is to use the Reset Button on the Cluster. With the Ignition Switch 'OFF', press and hold the Reset Button. Now turn the Key to the 'ON' position (not starting) while continuing to hold the Reset Button. Hold the Reset Button down for more than 10 seconds. Your Maintenance Required Light should now go out.

I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader.

Mar 31, 2009 | 1999 Honda Accord

1 Answer

2005 mercury sable check engine light


usually leaking intake gaskets will not set a misfire code but will set a lean code P0171 P0174 does the miss worsen in bad weather? Check the coil pack for cracks check the wires and plugs try spraying water on the coil and wires to see if it worsens

Nov 20, 2008 | 2005 Ford Taurus

3 Answers

2005 Toyota Corolla


This light comes on to rermind you to service the car ( oil,filters ect ) you can turn this off when you start the car by making sure the odometer is showing ( not the trip meters A or B ) and hold in the reset button for the trip meters and turning the ignition switch all the way forward. When this is done the odometer will start to show dashes and when the dashes are gone the light will be reset.

Jul 08, 2008 | 2005 Toyota Corolla

4 Answers

Reset maint req


Reset - step 1 turn the key to the 'on' position. using the trip meter button, toggle the lcd until 'ODO' is displayed. step 2 turn the key off. now, push and hold the trip meter button. while holding the trip meter button, turn the key to 'on'. step 3 while you continue to hold the trip meter button, you will see on the lcd disply five (5) small dashes and they will begin to 'count down' rather quickly. step 4 continue holding the trip meter button and once all the dashes have been cleared, your lcd will display six zeros (000000) - release the trip meter button now - and then the lcd will display 'ODO' and your current mileage. at this time, your 'maintenance required'/oil change light has been reset.

May 15, 2008 | 2005 Scion tC

Not finding what you are looking for?
2004 Honda Civic Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...