Cars & Trucks Logo
Posted on Jun 26, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

The check enginge light,ABS light, brake and low fuel light come on and off at will. A recent miss in the running of the engine led us to the fuel pressure regulator. All spark plugs were replace in the past 2 months, yet the mechanic told me the plugs were fouled out as well. I know these are not all related, but the fuel pressure regulator has me puzzled. Where can i go to get detailed description/pictures of where this is and what it does, what typically cause these to fail, etc. Thanks.

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 3,600 Answers
  • Posted on Jun 26, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: May 24, 2009
Answers
3600
Questions
1
Helped
1575250
Points
11774

The fuel pressure regulator adjust the fuel pressure from 30 psi to 50 psi, full fuel is with no vachum or wide open throttle toes tickling the Rad. cap at idel it's 30 PSI but I don't know if you have a Vac or electric operated one. the regulator is on the fuel rail andis round most of the time. and go to http://www.alldatadiy.com to read more on it, there is a whole lot more to what you don't know sir.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

06 chevy colorado 3.5 enginge misfire cyc.#2, changed coil pk & plugs. & found oil in around 3 plug wells & on plugs too. After changing coil pk & plugs it still miss fires & check engine light not only...

plugs are always the last to suspect when there are misfires
It is most likely injector problem from
low fuel pressure ,
dirty injector tips , injector wiring and harness or
ECM problems
0helpful
2answers

ABS and Brake light on dashboard is on. Speedometer is not working too

You have too many too many things going on to give a good diagnoses. It really needs to go on a scanner. My best guess, is the instrument panel is bad.
2helpful
2answers

The ABS light came on and is staying on. Why and what do I need to do? The vehicle doesn't seem to drive any differently. I did notice a motor of some kind running after I turn the engine off. Could...

abs stands for anti breaking system its something strting to go wrong with your brakes it throws that code until you fix the problem could be serious could be low break fluid find a honest mechanic shop most of them will tell you what it means free they can pull the abs code that tells them what it is good luck
1helpful
1answer

ABS light on and Alarm sounding, also another red indicator light is on at the bottom below the speedometer. Just came on recently, checked break pads. Front and back will be replaced because there running...

no but if your pads are worn then the brake fluid will be low , therefore a red brake light will come on. the only way to check the abs is to scan ecu for codes,
1helpful
2answers

My brake and anti brake lights stay on all the time

CHECK ALTERNATOR OUTPUT IT SHOULD BE 13.5 TO 14.5 VOLTS WITH ENGINE RUNNING.IF VOLTAGE LOWER 12 VOLTS THAT WILL CAUSE BRAKE AND ANTI LOCK BRAKE LIGHTS TO COME ON BECAUSE THAT NOT ENOUGH POWER FOR ABS BRAKES OPERATION.IF ALTERNATOR GOOD.BRAKE AND ABS LIGHTS ON ALSO MEANS LOW BRAKE FLUID LEVEL CHECK BRAKE FLUID LEVEL.ALSO. YOU HAVING BRAKE FAILURE.YOU NEED TO HAVE GARAGE OR DEALERSHIP CHECK BRAKES SYSTEM.BEFORE BRAKES COMPLETELY FAIL.
0helpful
1answer

2000 Grand Am, the Check Enginge light along with

ABS Light could mean a bearing. But my lights were, ABS L/S, Service engine soon and another right next to it R/S.
0helpful
1answer
0helpful
2answers

99 venture has warning lights on at different times overheating,

IT REALLY SOUNDS LIKE A HEAD GASKET AS FAR AS ABS IT COULD BE LOW ON BRAKE FLUILD OR BRAKES MAY NEED REPLACED OR ABS MODULE VERY DANGEROUS TO DRIVE WITH ABS LIGHT ON
Not finding what you are looking for?

118 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...