Question about 2002 Hyundai Accent

1 Answer

Fault codes P0722 and P0717

I took my 02 Hyundai Accent GS to get inspection, there, these codes came up:P0722 Output Speed Sens Circuit No Sig
P0717 Input turbine Speed Sensor Ckt No Sig
The inspector told me i should take car into dealership, but i wanna know if anyone else has had this problem and how much will it cost me? And could i fix th eproblem myself?

Posted by on

  • 2 more comments 
  • hablissettpa Jun 26, 2009

    How much would sensors cost and where would they go? From there i can definitly figure it out.

  • hablissettpa Jun 26, 2009

    And i also read that these codes may be faulty and that reprogramming may be required.

  • Sid R. Sep 25, 2012

    Is this problem found in the transmission?

  • Anonymous Mar 12, 2014

    How do I fix code P0722 for a hyundai accent

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

You just need to replace the sensors. If you are mechanically inclined, you can do it yourself. If you don't feel comfortable working on an expensive transmission, take it to the dealer.

Posted on Jun 26, 2009

  • Eldric Venne
    Eldric Venne Jun 27, 2009

    Being that it is a 02, and this is the first time you have had this problem, I doubt reprogramming would do anything. Reprograms/reflashes usually happen within the first 3yr/36k. The Sensors should come from the dealer. Not 100% sure about your model, but most speed sensors screw/bolt on from the outside. Some, not all require the valve body to be dropped to get to them. If it has been over 30K, you should have your fluid changed as well.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyndai h1 codes p0335 p1131 p0180 p1123 p1120 p0121 p1127 p0110


Wow do You have a bunch of different Sensor and Circuit Problems

0110 Intake Air Temp Circ Malfunction
0121 Throttle Position sensor A Range Problem
0180 Fuel Temperature Sensor A Circuit Malfunction
0335 Crankshaft Pos Sens A Circ Malfunc
1120 Throttl Pos Sensor Circuit
1123 Throt Pos sens Higher then Expected
1127 Exhaust Not Warm Downstream 02 Temp Sensor
1131 Lack of Sig H02S Sens Indicates Running too Lean
Learn more about codes here http://www.troublecodes.net/OBD2/Pcodes/

I would guess with all this You may Have a Connection Problem or a Computer Issue Get the codes reset and monitor as soon as check engine light comes on to see what codes com up first and what codes are pending
Good Luck Rickie

May 13, 2014 | 2010 Hyundai H-1 Travel

1 Answer

2001 Hyundai Accent Output shaft speed sensor


output shaft speed sensor on top transmission. just depress the release tab disconnect electrical connector then remove output shaft sensor bolt.remove sensor.

Jul 15, 2013 | 2001 Hyundai Accent

1 Answer

I own a 2000 Hyundai accent the codes came up with P0717, P0734, P0732,P0108. Please help


Sorry to tell you that it is incorrect gear ratio codes. Must replace the transmission.

Mar 14, 2013 | 2001 Hyundai Accent

1 Answer

I have a nissan altima 05 3.5L engine service light just came on and my scanner read these codes P0722 and p0717 p0462 and p0500 are these things i can fix on my own?


CODE PO462 FUEL TANK LEVEL SENSOR VOLTAGE LOW. CODE PO717 TURBINE SHAFT SPEED SPEED SENSOR NO SIGNAL. CODE PO722 OUTPUT SHAFT SPEED SENSOR NO SIGNAL. CODE PO500 VECHICLE SPEED SENSOR CIRCUIT MALFUNCTION. SOUND LIKE YOU HAVE TCM ECM PROBLEMS GETTING TOO MANY CODES. COULD HAVE LOOSE GROUND WIRE TO THE TCM AND ECM.

Aug 06, 2011 | 2005 Nissan Altima

1 Answer

I Have A 2000 Hyundai Accent And The Codes P1529 and P0722 Came Up. What Does This Mean. Please Help Me Out.


P1529 - MIL light request

P0722 - Transmission Pulse Generator B. The Pulse Generator detects the revolution of the idler gear parking pawl lock gear and emits a pulse signal. The pulse signal is sent to the Transmission Control Module (TCM) which converts it into vehicle speed. The code is detected when the Pulse Generator B failed to provide a signal to the TCM upon initial movement of vehicle.

Symptoms:
- Engine Light On (or Service Engine Soon Warning Light)
- Speedometer improper reading
- Possible shifting problems

Possible Causes:
- Pulse Generator B harness or connectors
- Pulse Generator B circuit is open or shorted
- Pulse Generator B

Jan 15, 2011 | 2002 Hyundai Accent

1 Answer

2000 hyundai accent with error codes p0717 and p1529


P0717 - Input/Turbine Speed Sensor "A" Circuit No Signal
P1529 - Customer Snap Shot Request

  • NOTE_P1529 is a generic code which is issued by the TCU to tell the ECU to turn on the CEL. It means nothing by itself and is usually included with other TCU codes.

Aug 21, 2010 | 2000 Hyundai Accent

1 Answer

Codes p0722 and p0717 what is the problem?


p0722 stands for output speed sensor, this sensor might be in need of replacement, p0717 is for transmission turbine speed sensor, P0717 code comes with the following symptoms: engine cutting out, misfire and hard start after the engine is warmed up. check the coil plugs which is the equivalent of spark plugs except it does not have any plug wires. Start with the mileage and if the engine has over 100k miles, usually the coil plugs are worn. You can check it by checking the coil plug wells on the valve cover. If soaked with oil, the coil plug is normally shot and this goes the same for the valve cover gasket. Apparently, when the valve cover leaks oil, it is deposited in the coil plug well and starts shorting the coil plugs because of the contaminated oil. Note: when changing coil plugs, always replace them ALL as a set.

Jul 02, 2010 | 2003 Suzuki Aerio

1 Answer

Need to know what these codes mean for hyundai accent P1529, P1404, P0722


P1529- TCM MIL request signal failure
P1404- DTML Heater circuit failure
P0722- ATM Output speed sensor no signal

All these together indicate a possibly cut wiring harness failure, or other major circuit issue.

Apr 23, 2010 | 2002 Hyundai Accent

Not finding what you are looking for?
2002 Hyundai Accent Logo

1,706 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

79851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...