SOURCE: key stuck in ignition
There a several recalls that deal with this problem, it seems that due to a defective part in the ignition interlock system at times the key not be removed from the ignition, it appears the issue is corrected by installing a new lock cylinder, to read the full text of recalls on this issue go to link listed below.
http://www.carcomplaints.com/Honda/Accord/2000/investigations.shtmle
SOURCE: 1997 pontiac sunfire key wont turn in ignition
You will have to have the ignition cylinder replaced in the car. The only thing that keeps that ignition from turning is a little tang on the sdie of it. The only way that tang moves is by the tumblers inside the cylinder moving it. They will have a hard time replacing it too as they can't remove the cylinder from the bore until it is in the "run" position. Obviously there are ways to get them out but it usually involves using half the tools of a good tech's toolbox. if it is towed the towtruck driver will have to use dolly wheels or remove the shifter cable at the transmission to get it to move as it will be stuck in park- unless is a standard shift.
I am sorry for the bad news. Get a second opinion from somebody that can put their hands on it , but it sounds like you have a tried all or most of the tricks.
Good luck...........Scott
SOURCE: Key win't turn ignition switch in 2008 Chevy HHR
replace the floor shifter. there is a switch on the shifter that allows the key to move. gm has had alot of problems with these shifters.
SOURCE: When I put the key into the ignition and try to
Firmly grab the steering wheel ,left hand on the 2,o'clock position,and with your right,at the 8,o'clock position and turn it until you feel the wheel move ,let go of the 8 ,oclockand try the key ,,,,,this may take a couple of try's.
Good luck
86 views
Usually answered in minutes!
×