Question about 1990 Buick LeSabre

1 Answer

1990 buick lesabre turn signals don't work,hazard flashers work, bulbs are ok, running lights & brake lights work, just installed a new turn signal assembly, thought that would fix the problem, it did not, what's the fix?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

I think that your flasher is bad I believe that the 4-ways flasher is a seperate flasher unit it should be in the fuse box and look like the 4-way flasher , to find the flasher turn on the 4-ways and you can feel it or hear it flashing and lok for the flasher for the turn signals
Mike

Posted on Jun 27, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3074 Answers

SOURCE: 1990 buick lesabre turn signals

the turn signal flasher is a small canister-shaped or rectangular unit located under the dash, either in a clip adjacent to the steering column or in the convenience center which is located located under the right side of the dashboard and houses relays and other components. The fuse.faulty flasher unit a broken switch or a loose or open wire. We have eliminated the switch, I would check all fuses inside and out, you can replace the flasher with the hazard flasher as if I remember correctly they are the same shape and size, then it is just a matter with a tester light running it from the column to the sockets and finding the break. Hope this helps Tim

Posted on Oct 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left turn signal doesn't flash.


there is a flasher under the dash put your 4 ways on and listen for the tick noise find the flasher unit under dash area driver side there is two one for the 4 ways and 1 for turn signals now that you have found them turn on working signal touch the flasher unit you will feel it pulse and hear the noise when you have the one pulseing on working signal this will need replacing can also be in fuse area have a good day

Nov 22, 2014 | 1990 Buick LeSabre

1 Answer

Blinkers do not work


It may be a fusse. Lights are ok if u replased. But hazards and turning lights have diferent fuses. Check fuse box undes th dahs and hood

Dec 07, 2011 | 1998 Buick LeSabre

1 Answer

The brake lights work but the turn signals don't!! Have checked the fuses and bulbs, but not finding the problem


Fuses and bulbs OK, but wires? Additionally I suggest keep in mind that turn signals work with FLASHER devices (two independent) on 1993 Buick Skylark..

Application: Turn signal
Flasher is located: Front seating area, driver side, under dash, driver side of steering column, mounted on support bracket

Application: Hazard flasher
Flasher is located: Front seating area, driver side, under dash, above kick panel, mounted in top of convenience panel

Hope this helps (remember to rate and comment this answer).

May 14, 2011 | 1993 Buick Skylark

1 Answer

I have a 98 eclipse. I was putting new tail lights on and then the signals stopped working along with the brake lights. the fuse to the brake lights had burnt so I replaced it. The signals however are...


IF THE TURN SIGNALS STILL WORK IN THE FRONT, THAT MEANS THE FUSE & THE FLASHER ARE OK. IF THE SIGNALS DON'T WORK AT ALL CHECK TURN SIGNAL FUSE & STOP / BRAKE FUSE. ARE YOU SURE THE CORRECT BULBS ARE BEING USED?

Jan 24, 2011 | 1998 Mitsubishi Eclipse

2 Answers

1990 buick lesabre turn signals don't work,hazard flashers work, bulbs are ok, running lights & brake lights work, just installed a new turn signal assembly, thought that would fix the problem, it did...


the turn signal flasher is a small canister-shaped or rectangular unit located under the dash, either in a clip adjacent to the steering column or in the convenience center which is located located under the right side of the dashboard and houses relays and other components. The fuse.faulty flasher unit a broken switch or a loose or open wire. We have eliminated the switch, I would check all fuses inside and out, you can replace the flasher with the hazard flasher as if I remember correctly they are the same shape and size, then it is just a matter with a tester light running it from the column to the sockets and finding the break. Hope this helps Tim

Oct 31, 2010 | 1990 Buick LeSabre

2 Answers

I have 4 way flashers but no turn signals....help!!!


there is a flasher for both 4 way & regular turn signals ( check to make sure the bulbs are good
the backs are easy >>> Just step on the brake, If the lights light up the bulbs are good you my have to remove the bulbs one at a time in the front check your ground wires to the lights if everything is good replace the flasher unit if that fails replace the turn signal switch

Feb 26, 2010 | 1990 Buick Century

1 Answer

Can't find flasher on 1990 buick lesabre


A friend of mine restores cars and he said:

There are two different flashers.
1. The hazard lights should be found on the steering column.
2. The turn signal flashers should be found under the steering column to the left.

Hunnybunny11

Jan 23, 2010 | 1990 Buick LeSabre

1 Answer

Turn Signal Fuse or switch replacement? '93 buick lesabre?


Yes all the wiring needs to be complete. Then all the bulbs must be inserted into sockets. left side marker right side front turn back turn reverse lights brake light everything. Then make sure they all work. The problem could even be a bulb thats on the fritz ready to blow but still on and dim little light. if that's all fine then it's probably your flasher. There are 2 flashers one for turn and one for hazards but I think they are the same but still separate. located under dash on either side of the steering wheel. The flasher closest to the door is up in there pretty far it's size is about like a 2 liter cap and it's silver. good luck

Sep 17, 2009 | 1993 Buick LeSabre

1 Answer

1990 buick lesabre signal lighs not working, install new flasher!


If fuses are good, I would check the flasher. Located under driverside dash by the steering column.

Jul 29, 2009 | 1990 Buick LeSabre

1 Answer

No turn signals


Have you tried replacing the flasher? They're typically round, and with the fuses under/in the dash. They probably cost 10-15 bucks, usually available at your local autoparts store.

Nov 24, 2008 | 1990 Buick LeSabre

Not finding what you are looking for?
1990 Buick LeSabre Logo

765 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...