Question about 1996 Honda Accord
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You have to remove the console and radio pod. Then remove 2 screws that you can now get to behind the pod. Then pry out the dash light dimmer switch (the one you use to adjust dash light brightness) remove the screw behind it that holds in the gage cluster trim. Then there is another switch on the other side under the cluster (don't remember what it is) and there is another screw behind it. Have fun, LOL!
Posted on Jun 28, 2008
easy there is a screw on both sides were bumper and fender meet just pop back fender liner its a phillips head. Then pop hood remove clips on black trim infont of radiator. Underside where bumper goes under car remove those clips and 10mm bolts after all is removed bumper just pulls off ...... may have to give it a hard **** a few times but it will come off. Should only take 15-20min to remove if its your first time
Posted on Jul 03, 2009
need type A T3 8mm base
unless you want stock clear color i think at dealer its under $3
Posted on Dec 19, 2009
Tips for a great answer:
Oct 08, 2012 | 1996 Honda Accord
Feb 19, 2011 | 1996 Honda Accord
Oct 20, 2010 | 2003 Honda Accord
Mar 17, 2010 | 1995 Honda Accord
Feb 24, 2010 | 1996 Honda Accord
Jun 28, 2009 | 1996 Honda Accord
Jun 25, 2008 | 1994 Honda Accord
1,010 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: