Question about 1991 Chevrolet C/K 3500

1 Answer

By brake lights and turn signals are not working, running tail lights still work no fuses blown whats my next step?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,002 Answers

I would replace the bulbs. When you take the old ones out check the sockets for corrosion. REplace them too if you see corrosion in there. Check the grounds to make sure they're not broken and are making good co ntact. If they are rusty or corroded, take them off and clean them up with a piece of fine sandpaper or emery cloth. If the light sockets have been previously replaced check the joints for corrosion. Shrink tubing works better then tape. Get it at any auto parts store. Also check the plug in behind the bumper for contact and corrosion. This should get your lights back.

Posted on Jun 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights work but tail lights don't work 91 LSC


check and make sure you have the correct light bulb in the tail lamp fixture.

Oct 15, 2013 | Lincoln Cars & Trucks

1 Answer

Turn signals not working and brake lights not working


replace brake light switch @ BRAKE PEDAL, next, replace turnsignal flasher under dash, check for blown fuse, if turn sig. still doesn't work, check turnsig., switch, & or for loose connection.

Feb 02, 2013 | 1993 Dodge Dynasty

2 Answers

I have no break lights or turn signals


Turn signal tail lights and BRAKE LIGHTS NOT WORKING


It can be faulty brake light switch causing the problem or its blown brake light bulb. First check and confirm brake light lamp is working and that's not the case.

For turn signal not working it can be faulty turn signal switch or its issue with wiring:----


==========

To trouble shoot brake and turn signal related problem, check the help links mentioned below:-----


Click the link:----
1996 Buick Regal Grand Sport Brake light Switch Location? http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------
No brake lights on Buick? http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------
Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------
How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------
How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------
Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------
1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------


2003 Chevrolet S10 Tail light Fuse http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html

---------
Chevrolet Parking light and Tail lamp light Wiring diagram http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html

----------
Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

----------
Turn Signal Not working http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html

----------
Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

--------
Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html

-----------
Turn signals not working on 1987 Jeep Wagoneer? http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------
How to replace rear Brake lights on 2004 Toyota RAV4? http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------
One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------
2002 Lincoln Town car Fuse Box http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html 2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------
Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------
2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------

These will help.

Thanks.

Nov 24, 2012 | Cars & Trucks

3 Answers

98 town car my brake lights both turn signals work my hazards work, but my running tail lights don't work


Hello,

Inside your instrument fuse panel look for fuse #31 which powers up the light control module and the main light switch, also while there be sure and check fuses 1, 3, 5, 7, and 9 to be sure they're not blown.

Good luck!

Let me know if this helps.

Rodney

Jun 14, 2011 | Lincoln Town Car Cars & Trucks

2 Answers

Interior dash and running lights dont work but my signal and brake lights work else works


Look at fuse #18, a 15 amp fuse, in the fuse block. This fuse powers both the tail lights and instrument cluster lights. Usually both of these light systems are powered by the same fuse so when your cluster isn't lit up you'll know right away that your tail lights aren't working as it's not safe to drive without tail lights. Your brake, turn, and head lamps are powered by different circuits. Hope this helps and good luck!

Aug 11, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

I have a 2000 Dodge Durango I bought about 4 hours ago. The tail lights do not work but the brake light and turn signals do. Also the dash lights do not work. The dash lights came on when I hit the...


The odds are the one fuse is blown for the dash and the tail lights. And the wrong bulb may have been put in for the brake light. The brake light is feeding back into the tail light circuit causing the fuse to blown out.

Change out the bulbs with OEM bulbs and replace the blown fuse. That should fix the problem.

Apr 16, 2010 | 2000 Dodge Durango

1 Answer

99 neon running tail lights do not work but tail lights work when brakes are applied....help


what you are seeing is the bright filament on the bulb working,
the tail light bulbs have two filaments in each bulb,one is dim and one is bright,the bright one is to the brake and turn signals,that way when you step on the brake with the tail lights on the same lens light up brighter to warn drivers behind you..
you need to check the fuses in the car for tail lights first,see if your plate light is on that will tell you the bulbs are just blown

Nov 22, 2009 | 2000 Dodge Neon

1 Answer

Rear taillight problems


I had the same problem with my 1996 Mystique about a year ago. The brake and tail lights stopped working, except for the center brake light in the window. Turned out to be oxidation of the terminals at the connector on the turn signal. Yes, that's right, turn signal. The electrical signal to the tail lights goes thru the connector on the turn signal. To fix, I cleaned the contacts and the brake lights started working again. Hope this helps. Cheers, Henry

Nov 25, 2008 | 1998 Mercury Mystique

1 Answer

2003 Sienna tail lights don't work when headlights are on


Look under the dashboard, next to/above the park brake pedal, for the interior fuse box. It has a black plastic cover. Remove the TAIL fuse, and see if it is blown. This should get you fixed up. Hope this helps, and Thanks for choosing FixYa.

Nov 11, 2008 | 2008 Toyota Sienna

3 Answers

Tail lights and brake lights not working - not fuse - what can it be?


Brake light switch, located on upper brake pedal should be checked, that is most likely your brake light issue, but U say tail lights aren't working, but running lights do, tail lights and running lights I would consider to be the same, so can u clarify that for me? Let me know how the u do w/ brake light switch, and if u have issue w/ tail lights?

Nov 01, 2008 | 1994 Ford Thunderbird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...