Question about 2005 Hyundai Elantra

1 Answer

Car doesn't chirp when I lock it

When I lock my car, it no longer chirps indicating the "alarm" is activated. What would cause this? And how do I fix it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

In order for the ANTI-THEFT alarm to ACTIVATE, all doors, hood & trunk switches must be OPEN circuit (this means closed). Most often the problem is caused by the Hood Switch not closing all the way (meaning it is still grounded - not OPEN). Take the vehicle into a Hyundai Service Center (dealership), pay the diagnostic fee. They will tell you EXACTLY what the problem is and what's needed to fix it (parts, labor, tax, time-frame, etc.). This way you will find out which parts, if any, you need to fix it - perhaps fix it yourself.

Posted on Jun 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My first alert fire alarm is chirping...three quick chirps....help please...the noise is driving me crazy


replace the flat battery
normally a chirping alarm is indicating that the battery is going flat and the alarm is no longer reliable
most fire authorities recommend a anniversary date and change the battery on that date for example ---every christmas eve

Nov 27, 2016 | Cars & Trucks

1 Answer

How do I get my alarm system to chirp instead of beep when it goes off or when I lock my doors with the remote entry key fob?


Check to see if your vehicle honks when you press the "lock" button on your key fob. Press the "lock" button multiple times in a row. Many devices won't beep unless you double-tap the button after locking. If the horn doesn't honk, but the lights flash, your chirp feature is probably disabled.

Use your keyless fob and ignition key to enable the audible chirp. The process varies considerably on different makes and models. You must usually consult your owner's manual, a dealership or the alarm manufacturer for the correct process.

Jan 29, 2015 | 2006 Hyundai Tiburon

1 Answer

2001 mitsubishi eclispse gs wont start how do you bypass the security system


  • 1 Turn the ignition key counter clockwise in the driver's side door to unlock the caricon1.png. This deactivates the alarm long enough for you to gain access to the vehicle. Then, place the key in the ignition and turn the key until it clicks once. This starts the car's battery, but doesn't ignite the engine. The LED light on the dashboard should stop blinking, indicating the alarm is temporarily disabled.
  • 2 Locateicon1.png the box for the alarm under the dashboard on the driver's side of the car. Then, look for the override button on the box. Typically, the small button is either red or black. With the ignition key in the "on" position, press the override button and hold it in until the alarm chirps once. This disables the alarm until you manually reactivate it.
  • 3 To reactivate the alarm, turn the key to the "on" position and press the override button once. The alarm chirps twice, indicating the alarm is active.

  • Hope this helps!

    Mar 15, 2014 | 2001 Mitsubishi Eclipse

    1 Answer

    1997 BMW 318i alarm won't activate


    sounds like a relay not working

    May 23, 2013 | 1997 BMW 318

    1 Answer

    My horn doesn't chirp when I lock the doors.


    My chevy doesn't chirp on the first press of the lock button, it just locks. If you press it again, then it chirps. To be honest, I like the fact that it doesn't chirp first - that just draws attention to the fact that you left your vehicle.

    Nov 30, 2011 | 2004 GMC Envoy

    1 Answer

    When car battery replaced - car alarm no longer chirps when armed. However the remote does lock and unlock doors.


    Sounds like your alarm is now in valet mode. Consult your alarm user's manual on how to remove it from valet mode.

    Jun 29, 2011 | Hyundai XG350 Cars & Trucks

    1 Answer

    I removed the battery from my car and when i put it back in the car would start all the control panels work in the car I just wonderd if i had to reset the alarm with the fob


    Open the boot lid and drivers door, and switch on the ignition. Rock the valet switch, in the centre console, 5 times. The system will chirp to indicate it has entered learning mode.

    On models with seat/mirror/steering wheel memory functions, the first remote will be linked to memory 1, second to memory 2 etc.

    Press the larger, lock, button of the remote. The system will chirp to confirm it has got the signal. If it doesn't receive any signals for 15 seconds, it will chirp twice and exit learn mode.

    To reset remote, rock the valet switch once. The system will chirp twice for remote number two, three times for number three etc, then press the lock button of the remote as above.

    When finish, wait 15 seconds for the system to time out and chirp twice, turn off the ignition, close the doors and boot lid and the job is done!

    Feb 28, 2010 | 1993 Jaguar XJ6

    1 Answer

    I bought a new Keyless remote for a 2007 Forester from a Subaru Dealer to replace an original one that went bad after 2 years. I have followed the directions in the owner's manual to program it, but can't...


    IMPREZA: 2005, 2006, 2007 and
    FORESTER: 2005, 2006, 2007, 2008
    Check for Immobilizer key on Forester XT models only.
    information is always subject to change and correction imp05keylessremote1.jpg
    new remote for 2005 Imprezas.
    This is not the same remote as the 05 Legacy/Outback remote which also has truck/gate release on the front and a red panic button on the back.
    Lock: press Lock button for 2 seconds or so to lock car, and arm optional security system. The car with chirp once and turn signals flash for locked, 5 short chirps and signal flashes if any door is not fully closed. The dome light goes on for 15 seconds and ignition key ring (if present) will light for 30 seconds when unlocked.
    Unlock: press unlock one time for driver's door, press again within 5 seconds to unlock all doors inkling rear gate (wagon). The system does not open the trunk.
    Panic mode: press and hold lock button for approx. 3-4 seconds to activate Panic mode. I panic model the horn honks and turn signals flash until either the lock or unlock button is pushed again.
    Finder mode: Press lock button 3 times within 5 seconds to activate Vehicle Finder mode. The horn will honk once and the turn signals will flash 3 times
    Distance: works within approx. 30 feet depending on battery strength, nearby concrete walls and etc.
    Audible Chirp On-Off: the system will chirp when locked or unlocked. To turn OFF the chirps, unlock the door and then push both lock and unlock buttons at the exact same time for 2+ seconds. There will be 2 chirps indicating the the audible is off. To turn the chirp back on, repeat the process and the system will chirp one time when it is back on.
    Battery: as the battery ages it will only work as you get closer to the car. When a battery is replaced, the transmitter must be re-synchronized with the Keyless control unit. To synchronize, press the lock or unlock button 6 times.
    Programming: 4 codes may be programmed.
    Sit in driver's seat and unlock all doors. Open and close the driver's door
    Turn the ignition key from LOCK to ON position 10 times within 15 seconds. Be sure to stop at both lock and on. The horn will HONK once to indicate transmitter programming mode is activated. Leave key in LOCK position and don't remove it from ignition.
    You now have 45 seconds to complete the programming as below.
    Open and close driver's door again.
    Push either lock or unlock button on the remote you want to program. The horn will honk 2 times when successful.
    To continue and program other remotes at the same time: open and close the driver's door and push lock or unlock on the remote. The driver's door must be opened and closed between each remote you want to program.
    Done programming? remove the key from the ignition and the horn will honk 3 times.
    DELETE old codes? Reprogram 4 times, it will overwrite old codes.
    Alarm Security System: optional on all models. When locked there is one chirp (can be turned off, see above), the turn signals will flash and the red 'security' light will start to flash once every 2 seconds except for STi which flashes twice every 2 seconds.
    There will be 5 chirps if a door, hood, and trunk or gate is not fully closed
    You can also arm the system by using the power lock button on the driver or passenger door as you get out of the car and then closing the door behind you.
    Disarm the system: push unlock for 2 seconds
    Lost remote, alarm activated? When you can't use a remote to turn off the system: open the door with a key or try to start the car and the horn will start to honk. Turn the key on-off 3 times within 5 seconds and the alarm will go off and you can start the car. It's simple!
    VALET mode: To set valet mode or just to disable the security alarm system: 1. unlock all doors 2. physically open the driver's door 3. hold the UNLOCK button on remote for 2+ seconds. The red 'security' light will then flash 2 times a second until the car is turned on.
    System has been Tripped (except for STi): if you unlock the door with the remote and it chirps the signal light flash 4 times, the system has been triggered;
    Identification mode: To find out what happened and why the system was triggered:
    Open and drivers door, leave it open. Turn ignition key from LOCK to ON 2 times and then leave in LOCK position.
    Tripped code: 1 security light flash: a door has been opened, 3 flashes when the impact sensor was triggered, 4 flashes when the ignition was messed with or battery disconnected

    Nov 19, 2009 | 2007 Subaru Forester 2.5X L.L. Bean...

    2 Answers

    Auto Lock Activation


    Deactivating/activating autolock
    There are 3 methods to enable/disable this feature. One through your
    dealer, the second with a power door unlock/lock sequence and the third
    with the keypad.
    Before following the activation or deactivation procedures, make sure
    that the anti-theft system is not armed, ignition is off, and all vehicle
    doors, liftgate and liftgate window are closed.
    Controls and features
    Power door unlock/lock
    procedure
    You must complete steps 1-5 within
    30 seconds or the procedure will
    have to be repeated. If the
    procedure needs to be repeated,
    you must wait 30 seconds.
    1. Turn the ignition key to ON.
    2. Press the power door unlock control three times.
    3. Turn the ignition key from ON to OFF.
    4. Press the power door unlock control three times.
    5. Turn the ignition back to ON. The horn will chirp.
    6. Press the unlock control, then press the lock control. The horn will
    chirp once if autolock was deactivated or twice (one short and one long
    chirp) if autolock was activated.
    7. Turn the ignition to OFF. The horn will chirp once to confirm the
    procedure is complete.
    Keyless entry key pad procedure
    1. Enter 5 digit entry code
    2. Press and hold 7/8 control
    3. Press and release 3/4 control
    4. Release 7/8 control.
    The user should receive a horn
    chirp
    to indicate the system has
    been disabled or a chirp followed by
    a honk to indicate the system has
    been enabled.
    Smart unlock
    This feature prevents the driver’s door from locking while the key is in
    the ignition. This feature will unlock only the driver’s door if the key is in
    the ignition cylinder, the driver’s door is ajar and all doors are locked
    using the interior trim switch. If these conditions are met, the entire
    vehicle will lock and the driver’s door will unlock within 1 second.
    Controls and features
    127

    May 15, 2009 | 2002 Ford Explorer

    Not finding what you are looking for?
    2005 Hyundai Elantra Logo

    358 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8557 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...