Question about 1995 Buick LeSabre

1 Answer

Hi i need to chage my side mirror of my 95 buick lesabre, i recently was clipped by a truck so it needs to be replaced, im not really sure how to take it off, will i have to take the whole side panel off? If i do, how would i go about doing it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove and replace mirror glass - 2001 buick lesabre


check with your dealer however most of the time you'll need the assembly you may try a windshield dealer sometimes they can get the needed parts

Aug 29, 2012 | Buick LeSabre Cars & Trucks

1 Answer

HOW DO I REPLACE THE REAR VIEW MIRROR ON MY 1999 BUICK LESABRE LIMITED


  • Push the mirror lens upward so it faces the roof of your Buick LeSabre.

  • Place the eight-pointed star head of the Torx driver into the setscrew located in the base of the rearview mirror. Turn the Torx driver counterclockwise. This releases the clamping pressure on the mirror.

  • Slide the mirror upwards to remove it from its metal bracket.

  • Place the base of the replacement mirror against the windshield, directly above the metal bracket. Slide the mirror down into the bracket. The bracket has a groove on each side into which the mirror will slide.Secure the mirror to the bracket by tightening the setscrew clockwise with the Torx driver.



  • May 04, 2011 | 1999 Buick LeSabre

    1 Answer

    I need to replace the driver side power mirror on my 1997 Buick LeSabre Limited. How do I remove the interior door panel to have access to the mirror clips and electrical connection?


    First screws are on the bottom side of the inside door pull/ arm rest, and after that there may be a few around the edges of the panel. unscrew the up and down locking pin if it has one up there by the window, gently pull out at the bottom to release the plastic push pins and once all pins are pulled out (there are probably 10 to release) reach in between the panel and gently take apart the connections. Lift up and out to free the panel of the window gaskets and there you are, Be easy with it all that stuff breaks easily!!!!

    Jun 19, 2010 | 1997 Buick LeSabre

    1 Answer

    1999 LeSabre, had the drivers side view mirror knocked off... How do you replace it? Do I need to take the door pannel off? mirroe is electric but not heated. Thanks


    yes you need to remove the door panel,but you can just let it hang no need unhooking any wires,there is only two nuts holding the mirror fast.

    Dec 09, 2009 | 1999 Buick LeSabre

    1 Answer

    How to remove passenger door panel on 97 lesabre


    On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror on

    Sep 27, 2009 | 1997 Buick LeSabre

    1 Answer

    In my 1994 buick lesabre I have the inside door panel off on the passenger side but you can't get to the outside door mirror housing to replace the mirror. what else has to come off?


    Sometimes you have to make your own......neatly done......in a non important area.......access hole when doing work on doors.
    Just make it look factory and only as big as needed.

    Aug 10, 2009 | 1994 Buick LeSabre

    1 Answer

    How do I remove the front door panel to replace the mirror


    Normal 0 Disconnect your negative battery cable. Locate and remove the screws that hold your interior door handles in place (they may be hidden by snap in, or snap on clips). Remove the interior door handles, then disconnect the wire clips to the switches. Your panel is held in place by snap in clips; use a small pry bar to pull them from the door (try to get as close to, or directly under the clips to prevent them from tearing out of the door panel). Once the clips are pulled, pull the panel upward to remove it from the door.
    Install in reverse.

    If you don't have power windows you will have to remove the manual window crank. It is held in place by a clip on the back side of the base. To remove the clip, you will need a small hook (kind of like a knitting needle). Put the hook in behind the base, and grab the clip and pull it off. To replace it, slide the clip back on the window crank, and snap it back on the door.

    May 25, 2009 | 1998 Buick LeSabre

    1 Answer

    Broken steering collumn 95 buick lesabre


    Okay well here is your most likely problem,the nuetral safety switch it's located on the transaxle(transmission where the shift linkage comes in)you can test this to make sure its working but it will require conituity tester,a parts store might also test it for free,this is a $100+ dollar switch,so if needs to be replaced check with the local salvage yards to see if you can get one used.0ccdc81.gif

    May 13, 2009 | 1994 Buick LeSabre

    2 Answers

    Buick LeSabre side mirror


    Yes, you will have to take the door panel off. I'm attempting to replace the passenger side mirror at the moment and have the old one out, but can't get enough access to the bolts to attach the new one without opening up the side panel.
    I'm still looking into how to do this, as I haven't found the right sequence for removing it. I'll try to post how when I figure it out, as I also hate paying for a manual for simple repairs.

    Jul 19, 2008 | 1997 Buick LeSabre

    Not finding what you are looking for?
    1995 Buick LeSabre Logo

    146 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8202 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...