Question about Honda Pilot

1 Answer

The maintenance required light on my wife's 2004 Hond Pilot is blinking 10 times when she turn on the ignition. It started doing this after I put in new plugs and an oil change. What does it mean. I already know how to reset it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

To reset your maintenance light follow the following steps:
1 Turn off the engine.
2 press and hold the select/reset button in the instrument panel, then turn the ignition switch ON
3 hold the button for at least 10 seconds, until the indicator resets.

Posted on Jul 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

1 Answer

Maintenance required light is on


If you take your civic into a Honda dealer for regular maintenance they should reset it for you. Even most Lube shops do as well. But if you do your own vehicle services like oil changes (which is what that light is there for) then here's how you can reset it.

  1. put your key in the ignition but do NOT turn it.
  2. press and hold the Odometer/Trip button.
  3. while holding the Odometer/Trip button, turn the key to the ON position but do NOT start the engine.
  4. As you hold the Odometer/Trip button, after about 10-15 seconds the Maintenance required light should turn itself off.
  5. Once the Maintenance required light is off, turn the key into the off position then release the Odometer/Trip button.
That should do it. Hope this helps

Aug 20, 2014 | 2004 Honda Civic

2 Answers

My maintenance light is on, and I've already changed the oil and air filter and other maintenance items. How do I reset the light?


  • With the ignition switch OFF, press and hold the select/reset button
  • Turn the ignition switch ON, and hold the button more than 10 seconds.

Apr 19, 2011 | 1999 Honda Accord

1 Answer

How do I reset the "maintenance required" light on a 2002 honda civic ex?


With the ignition off, press and hold the odometer reset button in. While holding it in turn the ignition switch on but do not start the engine. After around 5-10 seconds the maintenance required light will reset.

Jun 19, 2010 | Cars & Trucks

2 Answers

Maintenance light blinking


First to check with OBD codes reader, this is one advise to fault; when you have this number (code) the clues for solve the problem are more.

Try it, comment and rated this.

Apr 10, 2010 | 2002 Honda Civic

2 Answers

How do i turn of the timing belt light on my 04 landcruiser 3 litre


Ive never heard of a timing belt light, but there is a maintenance light that can be reset. Here the procedure:

To reset the maintenance reminder light: Turn the ignition switch to the "ON" position. Set the odometer/trip display to the odometer (ODO) mode. Turn the ignition switch off. Depress and hold the trip meter reset button while turning the ignition switch to the on position. The maintenance reminder light will, illuminate for 3 seconds, blink for 2 seconds, illuminate solid for 1 second and then turn off. Release the trip meter reset button. Turn the ignition switch to the off position. Turn the ignition switch to the on position. Confirm that the maintenance light goes out.
Let me know if this helped you out!

Mar 29, 2010 | 2004 Toyota Land Cruiser

2 Answers

Maintenance required light just came on and I have


1. Turn off the engine. The car should not be running when performing these steps.
2. Press and hold the select/reset knob. This knob is located on the instrument panel. It will be sticking out on the bottom right of instrument panel. It's the same knob that is used to reset the trip mileage or change what is displayed in the mileage/temperature box.
3.While holding the knob, turn the ignition switch (the key) to on (II) position. Continue holding the knob for approximately 10 seconds. The MAINT REQ'D light should turn off.

Oct 11, 2009 | 2004 Honda Accord

1 Answer

Resseting maintaunance required light


To reset maintenance light on this honda, using reset switch on dash in cluster(close to trip reset). Here is procedure HOLD DOWN RESET BUTTON while holding down, turn ignition to first position ACC/(first click.) Hold button for 30 seconds.Keep holding down button and turn ignition to ON position for an additional 30 section maintenance light should go off. Start vehicle and it should be good. Good luck and thanks for using FIX YA.

May 16, 2009 | 2005 Honda Pilot

1 Answer

Hi my 2003 honda pilot


to reset the the light , turn ignition switch to off position , press and hold the select/reset trip button , while holding the button turn ignition switch to the on position , with the engine off , continue to hold the reset button for about 10 seconds until indicator resets , your done.
you will see like 5 dashs blink then 4 then 3 then 2 then 1 then all flash . problem solved .

Jan 01, 2009 | 2003 Honda Pilot

4 Answers

2004 chevy malibu classic


Happens all the time to me. I trigger the Theft System by accident then the car won't start.  try this: Put the key in the ignition. Turn it to the "on" setting,but don't try to start the engine. Let it sit for 10 minutes until the Security light stops blinking and turns off. Take the key out and restart. Warning - don't have your lights, radio,etc on while you do this or the battery may die. 

May 15, 2008 | 2004 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...