Question about 1993 Honda Prelude

1 Answer

I would like to replace my 2.3 prelude engine with another to fit

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Honda Expert
  • 268 Answers

You can go on eBay and get an f22b DOHC (non-Vtec). They are about $300. less and have the same 160 HP. All you really need to do is swap your intake (because you want every vacuum hose going back to it's original position and the JDM fuel rail is on the wrong side compared to us in the US). You'll need your old engine's wiring harness because theirs are cut out and you don't know if you're getting a motor that was automatic or manual. Certainly keep your old engine right beside you as you do the swap because you'll need your distributor since you don't know if theirs had an external coil or internal coil. I've had 3 of these JDM motors in my racecar, it's the same power, just seems like the peak HP is later in the rev, like maybe less torque but more top end.

Posted on Sep 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set crankshaft timing on 1992 honda prelude 2.3 liter?


here is a u-tube video with a good tip for making sure the timing marks dont get move once set may help
How to replace timing belt on Honda Prelude 92 96 2 3 lt H23a1

Jul 28, 2014 | 1992 Honda Prelude

2 Answers

How to replace fuel filter in 1980 Honda prelude


An '80 prelude still on the road? The filter should be very simple. Loosen the fuel line clamps, pull the old out, put the new one in, making sure the direction of flow is correct. Tighten up the hose clamps, run the engine and check for leaks at the fittings.

Apr 11, 2013 | Honda Prelude Cars & Trucks

1 Answer

I have an 88 prelude with a low idle problem. from a cold engine start, it starts with 2000 or higher rpms and then after its warms up it goes back down to ABOUT a thousand but then bounces around eve


Hi Lasbs, Check the ignition timing and adjust with a stroboscopic timing light. The correct timing should be 10 degrees BTDC. If the vehicle is fitted with a carburetor, I believe it needs adjusting correctly, or with the Honda carb, it may be easier to replace it. If the vehicle is fuel injection carry out a diagnostic scan. Also make sure that all vacuum tubes are fitted tightly and that there are no cracks or broken joints. Regards John

Oct 19, 2012 | 1988 Honda Prelude

2 Answers

Is it possiblel 2 put a engine of 2006 2 a 87 would it fit it


Just for example i have seen on the net a 1987 prelude with a 2.2L Vtec nicly done but the front wheels looked towed out.So you have to think about weights engine are si-269 lbs.dx 284 lbs.What is a 2.2L Vtec?You better have a fat wallet you have all the electronics brain box and exe.it whould be fun! All thinks can be done. tt80500

Feb 21, 2011 | 1987 Honda Prelude

1 Answer

Hi can you please tell me how much a new or used motor would be to puchase and then the cost of getting it fitted for a honda prelude 88-89 model? and where do I get one. I live in brisbane south


You need the Honda B20A engine, it was used on their vehicles from 88-91 Preludes. You can get them on ebay several other places online. You can get them shipped to you in Australia. Good luck to you

Oct 16, 2009 | 1988 Honda Prelude

1 Answer

Im having trouble finding ball joints


havent a clue to be truthful ,just try fitting it but check the actual stud in case its a different size thickness as this can vary between build runs

Feb 02, 2009 | 1989 Honda Prelude

1 Answer

H22a4 SH engine swap to base transmission


is there a bearing the shaft fits into... you should be able to find a different diameter bearing for it.

Robert

Jan 09, 2009 | 1997 Honda Prelude

1 Answer

Replacing engine of 91 3rd Gen prelude with a 88 3rd Gen prelude


if they both are the 2.0L they are the sme thing.

Dec 01, 2008 | 1990 Honda Prelude

3 Answers

Can you fit 91 prelude sunroof on a 93 prelude regards trevor


I am having the same problem; I cannot find a 93 Prelude sunroof. But the answer is no you can't use any other year of sunroof on ours. Just about everything else but the roof will fit. Hope this helped.

Jul 20, 2008 | 1993 Honda Prelude

Not finding what you are looking for?

Open Questions:

See all 1993 Honda Prelude Questions

1993 Honda Prelude Logo

Related Topics:

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...