Question about 2001 GMC Yukon Denali

Open Question

Zafira design 2.2 drivers arm rest broken

Zafira design 2.2 drivers arm rest broken , how can I repair this ?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 566 Answers

SOURCE: oON MY ZAFIRA DESIGN 08 PLATE THE MIDDLE BRAKE

hi from uk this fault most likely the bulb has blown in high level brake lamp /3rd lamp as you say as you mention this car is 08 reg check the warranty period as it may/should be dealers repair ?for no charge ps if you or other drivers have a habit of sitting in standing traffic with foot brake on instead of use of handbrake ? this is prime cause of brake light bulbs o/heating and blowing element in bulb due to the actual b/light element is high wattage so burns brighter observe how many cars have one or more b/lights not working as you drive ? also bear in mind this is an offence and m o t failure as these light are obligatory (must have working ) and you can face a penalty if stopped by police

Posted on Dec 14, 2009

johnjohn2
  • 5763 Answers

SOURCE: Arm rest broken on drivers

You can try to repair it or just replace it, there should be two screws that hold it in place remove it and see if the plastic can be epoxyed or fixed,

Posted on Sep 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, i am looking at a 93 nissan pathfinder, it has a clean interior, a straight body, but the guy says it have a broken rocker arm. I know what rocker arms are. can you tell me, what damage this would do...


Just about any vehicle is worth $200 for scrap.
It would depend on how or why the rocker arm broke if the engine is worth fixing. You would not know without removing the valve cover and looking at the rest of the parts.

Feb 08, 2014 | 1993 Nissan Pathfinder

1 Answer

How to remove drivers side inner door trim of toyota camry altise v6 2003


Before you get too carried away it may be possible to replace the arm rest without touching the trim panel. Check for some plugs in the arm rest and if there are some prise them out and you will find screws deep inside that will allow you to remove the arm rest. Normally trim is clipped over the top of the door and held in place by push in clips around the door.

Mar 22, 2013 | Cars & Trucks

1 Answer

I leaned too hard on right hand driver's arm rest and it snapped and dropped. How do I repair this? Thanks


If you do not want to replace with a new one then best is to use M-Seal, Araldite or any other strong adhesive and join the broken peace. It can serve the purpose.

Jul 26, 2011 | Volkswagen Camper Cars & Trucks

2 Answers

Drivers side window came off track and now free falls,how complicated is the fix,ie removing door panel..


on a scale of 1 to 10 (1 being anyone over the age of 15 , 10 being specialty training / tools) I would rate this a 3 .

The glass didnt just fall off the track... they are designed not to do that. Something must have seperated or broke off in the door somehow ( from slamming the door when entering / exiting).

Take the arm rest off and then the interior door trim pannel. be careful pealing the plastic barrier back to gain access ( and always repair any damage done to this plastic barrier to re seal the door).

If you need a video , look it up on youtube, there are a few.

Feb 19, 2011 | 1993 Chevrolet Caprice

1 Answer

How do I remove or replace the arm rest on my Captains chair? I have a 1995 Chevy G20 van.


how do i remove the broken piece of arm rest from my 1999 full size chevy van . front drivers seat

Jan 24, 2011 | 1995 Chevrolet G20

1 Answer

Drivers window fell into to door. trying to remove door panel and try to figure out what happened. don't want to damage door panel by forcing panel off. 91 cad deville 35,000 miles sitting for long time....


Had exact same problem in '91 Cad. Fleetwood FWD, which is same as '91 Deville except for trim fender skirts. My mechanic said it was a broken window regulator. That part is not available new anymore, unless you can find some NOS. I bought a used regulator from Cadillacs Only for $75, and paid my mechanic for 1.5 hours of his time to r&r. Window now works fine. Not happy that I had this problem; regulator not a great design.

Jan 15, 2011 | 1991 Cadillac DeVille

1 Answer

Arm rest broken on drivers side door


You can try to repair it or just replace it, there should be two screws that hold it in place remove it and see if the plastic can be epoxyed or fixed,

Sep 04, 2010 | 2006 Toyota Tacoma

1 Answer

OON MY ZAFIRA DESIGN 08 PLATE THE MIDDLE BRAKE LIGHT IS NOT WORKING. WHAT COULD BE THE PROBLEM. VAUXHALL ZAFIRA 1.8 AUTO


hi from uk this fault most likely the bulb has blown in high level brake lamp /3rd lamp as you say as you mention this car is 08 reg check the warranty period as it may/should be dealers repair ?for no charge ps if you or other drivers have a habit of sitting in standing traffic with foot brake on instead of use of handbrake ? this is prime cause of brake light bulbs o/heating and blowing element in bulb due to the actual b/light element is high wattage so burns brighter observe how many cars have one or more b/lights not working as you drive ? also bear in mind this is an offence and m o t failure as these light are obligatory (must have working ) and you can face a penalty if stopped by police

Dec 14, 2009 | GMC Canyon Cars & Trucks

1 Answer

Window Switch Removal - The Drivers window switch has stopped working. How do I get the switch out to repair it or replace it? The window is currently stuck in the down position.


the arm rest containing the control, does come off seperate than the door panel. You will have to be careful when prying it off to avoid damaging the arm rest. There are tabs holding it in place.

It's a fairly simple job, the most aggravating part is pulling the arm rest to avoid bending it or damaging the external finish. Good luck!

Jul 28, 2009 | 2006 Ford F-150

1 Answer

Door Panel removal


remove all visable screws from panel and arm rest. Arm rest should come off. Use a flat thin tool or piece of metal and slip it between the panel and the metal door frame. Slip it in about 2 inches,. Slide it back or forth til you hit a stop. That should be a plastic pop in.twist metal tool to pull panel away from the door. It should pop away from door frame. Don't overdo it if it doesn't come out. try another spot. once you get one loose, you can tell how to get the others out. Once panel is loose push it upwards to get top lip out of window bottom. If it has power windows,disconnect plug. If it has manual windows, you will have to remove the window crank There is a snap ring behind window crank that has to be removed.push in on panel by window crank and you can see the ring.

Dec 06, 2008 | 1998 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...