Question about 2004 Nissan Maxima

1 Answer

2004 Maxima Se codes P0037 and P0057. It says Oxygen Sensor Bank 1. How do I locate this and how can I have it changed, it affects my car and it makes the 'SERVICE ENGINE SOON' indicate come up

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 30 Answers

The oxygen sensor looks like a spark plug with wires coming out of the top of it. it is screwed into the exhaust pipe near the engine. disconnect the wires and screw it out of the exhaust pipe turning it counterclockwise then screw the new one in and connect the wires. then clear the codes. one word of warning this is one of the most common codes and does not necessarily mean the sensor is bad. often it will appear if the engine is running too rich or lean because of another problem.

Posted on Jun 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Volvo S80 T6 3.2L OBD Code P0057 Bank 2 Sensor 2 won't clear and Code P0172 came back, have changed the oil diffuser cover and both O2 downstream sensors, need help ASAP


changed the wrong sensors
the code (p0057)refers to the heated oxygen sensor (HO2S) which is in the exhaust manifold before the cat converter
code p 0172 refers to system too rich bank bank 1===causes ---intake blocked ---EVAP canister purge valve --- fuel pressure---EGR systems ---injector/s---HO2S
If you replace the HO2S sensor/s then that will [robably fix all codes
the heated oxygen sensor reads the exhayst gas and reports to the ECM to adjust the air /fuel ratio to get the engine to run within parameters
when it is not working , it runs lean or rich

Mar 19, 2018 | Volvo S80 Cars & Trucks

1 Answer

P0057 HO2s heather control circuit low


I GOT the code:
PO 030 "heather control" bank 1 med sensor 1
This is on a BMW 2003model 316i

Do know which sensor this is?

Is IT the oxygen sensor on the catalysator or the temperature sensor on the engine?

Mar 11, 2013 | 2004 Toyota Tundra SR5

2 Answers

P0037. heater sen. where is it on the engine?


The code is for the heater in the O2 sensor bank one sensor two. That would be the sensor after the catalytic converter on bank one.
It could be the sensor itself or the power supply for the heater.

Aug 25, 2012 | 2006 Mazda MPV

1 Answer

If i am getting the codes P0037 P 0057 for the 04 nissan maxima is that the front or rear oxygen sensor ?


Hi there:
DTC P0037 - Bank 1 Oxygen Sensor Heater Circuit Low

DTC P0057 - Bank 2 Oxygen Sensor Heater Circuit Low


Cause could be harnesses connections, wiring, HO2S heater itself or ECM issue. Diagram location in THIS LINK.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.


Aug 16, 2012 | 2004 Nissan Maxima

2 Answers

Code P0037 on Santa Fe refers to bank 1 sensor 2 oxygen sensor. Where is it located?


Bank one is the first oxygen sensor in line from the engine back. Bank 2 is the second in line.

Apr 01, 2012 | 2001 Hyundai Santa Fe

2 Answers

The engine light and VSC light are on (Vehicle Singapore 2004 Lexus RX 300. Diagnostics report Error code P0037


your o2 sensor is bad. vsc will go on for any small DTC displayed on the MIL (cel)

P0037 LEXUS P0037 LEXUS - Oxygen Sensor Heater Control Circuit Low Bank 1 Sensor 2 Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
Possible causes - Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Faulty Engine Control Module (ECM) When is the code detected? The P0037 is set when the ECM detects an excessively low voltage through the heated oxygen sensor heater circuit P0037 LEXUS Description Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).

In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECMcontrols the heater element circuit by allowing current flow to ground.

The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.

o2_heater_circuit.gif

Mar 14, 2011 | 2004 Lexus RX 330

1 Answer

Subaru wrx impreza showing fault code p0037. how do i fix this fault which sensor is it and where is the sensor located?


http://helpforcars.net/obd_codes/codes.php?code=P0037

It's an O2 sensor according to the above link, and it is bank 1 sensor 2 low, the 2 meaning that it is downstream past the catalytic converter but not on the manifold.

- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Faulty Engine Control Module (ECM) Possible Solution Tech Notes The code means that there is a problem with the heater element circuit of the heated oxygen sensor. Water getting inside the heated oxygen sensor connector can caused the heated oxygen sensor fuse to blow, which is a very common problem for this type codes. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors.
Good luck on this repair.

Jan 01, 2011 | 2001 Subaru Impreza

1 Answer

Where is the rear "b2 s2" oxygen sensor located in a Jaguar 2003 xtype 2.5liter car? There are 4 oxygen sensors -- one in the front catalytic converter and one next to it by or in the exhaust manifold and...


Oxygen sensors are always numbered like this:
Bank 1 sensor 1
Bank 2 sensor 1
Bank 1 sensor 2
Bank 2 sensor 2

Some manufacturers use a kind of shorthand that reads different, but means the same thing:
Sensor 1/1 or O2s 1/1
Sensor 2/1 or O2s 2/1
Sensor 1/2 or O2s 1/2
Sensor 2/2 or O2s 2/2

Bank 1 is always the side of the engine where cylinder number 1 is located and, of coarse, Bank 2 is the opposite side.
On a 4 cylinder engine, there is only 1 bank and it is always referred to as Bank 1.

Sensor 1 is always the upstream sensor (The one located BEFORE the catalytic converter)
Sensor 2 is always the downstream sensor (the one that is located AFTER the catalytic converter.

Hope helps (remember to rate this).

Oct 06, 2010 | 2002 Jaguar X-Type

1 Answer

My check engine light has come on in my 2006 Pontiac G6 after 2 and a half years. What could possibly be wrong since I keep my car serviced and the guys had just told me that my car was in tip top shape?


P0016 - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor A
P0030 - Heated Oxygen Sensor (H02S) Heater Control Circuit Bank 1 Sensor 1
P0031 - Heated Oxygen Sensor (HO2S) Heater Circuit Low Voltage Bank 1 Sensor 1
P0032 - Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 1 Sensor 1
P0036 - Heated Oxygen Sensor (HO2S) Heater Control Circuit Bank 1 Sensor 2
P0037 - Heated Oxygen Sensor (HO2S) Heater Circuit Low Voltage Bank 1 Sensor 2
P0038 - Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 1 Sensor 2
P0050 - Heated Oxygen Sensor (HO2S) Heater Circuit Bank 2 Sensor 1
P0051 - Heated Oxygen Sensor (HO2S) Heater Circuit Low Voltage Bank 2 Sensor 1
P0052 - Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 2 Sensor 1
P0053 - HO2S Heater Resistance Bank 1 Sensor 1 (PCM)
P0054 - HO2S Heater Resistance Bank 1 Sensor 2 (PCM)
P0056 - Heated Oxygen Sensor (HO2S) Heater Circuit Bank 2 Sensor 2
P0057 - Heated Oxygen Sensor (HO2S) Heater Circuit Low Voltage Bank 2 Sensor 2
P0058 - Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 2 Sensor 2
P0068 - Throttle Body Airflow Performance (PCM)
P0100 - MAF Sensor Circuit Insufficient Activity

Jun 25, 2009 | 2006 Pontiac G6

3 Answers

Need to know where to put the oxygen sensor


you have 4 sensors. bank 1 sensor 1 - bank 1 sensor 2 - bank 2 sensor 1 - bank 2 sensor 2. it depends on which one is defective.

May 01, 2009 | 2001 Lexus Gs 300

Not finding what you are looking for?
2004 Nissan Maxima Logo

517 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...