SOURCE: 1998 jeep wrangler dashboard
chrysler tsb 08-015-99 pertains to this problem. there is a wiring connector on the cluster that needs replaced.part number is 5016261aa for the connector and 4778570 for te heat shrink
SOURCE: 97 wrangler oil pressure drops when engine is at idle
check the engine oil level... you could possibly need to replace the oil pump soon... if you do not live in a cold climate i would consider using 30 or 50 weight oil. do NOT use that in a cold climate as the oil is like molasses when it gets cold.
that's only temporary. one other thing to consider is a clogged oil filter... when was the last time it was changed ?
Robert
SOURCE: 2006 jeep wrangler check engine light came on it
There is a software update for the PCM that addresses this issue. TSB 18-028-06
SOURCE: 2006 Jeep Wrangler won't start
First, make sure you can turn the engine by hand. If you can't then the starter can't turn it either. Have someone else turn the key and look for the source of the click...may be a relay. Go over the starting circuit with a volt meter. Check for power at the starter main terminal and then with the key turned to "start" check for power at the trigger terminal on the starter. Check battery voltage and check relay operation.
You have a neutral safety switch on the transmission if its an automatic and a clutch switch if it's a stick. Check them as well. Make sure battery grounding on fender and block are also clean and secure.
Testimonial: "Will try! Thanks!"
SOURCE: exclaimation mark on dashboard?
check in your owners manual on page 242,it is the symbol for low tire pressure.
67 views
Usually answered in minutes!
×