Question about 1993 Toyota Celica

3 Answers

I put the car in 1st and let off the clutch and the spedo goes up but theres no power going to the wheels. And when you put it into gear you can push it freely.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey skibum1m I jacked the car up and spun the wheels and you spin one and the other does nothing does that tell you whats wrong?

Posted on Jul 11, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 30 Answers

Does it try to move in other gears? if so you have major tranmission problems but not likely if the spedometer is moving. sounds like you have a broken axle or cv joint. raise the front of the car and support it on jack stands then spin each wheel with the transmission in first gear while watching the axle under the car to see if it is turning all the way into the transmission. as you turn one wheel the other wheel should spin in the opposite direction.

Posted on Jun 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Sounds like one of the CV shafts is broken.

Posted on Jun 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai Accent '95. No reverse, and now no 1st and 2nd gear at all. Feels as it something metal is in the way.


is this a manual transmission ? You may have a problem with the clutch plates, clutch cable or if hydraulic the clutch master cyclinder .
The clutch is two plates of metal that rub together to allow the gears to move the car. When you push the pedal in the plates come apart to allow you to change the gears. If the clutch plates wear out or do not touch the gear box will not go into gear. It will feel like something is stopping the gear from going in. It could also be a syncromesh problem. I have a car that intermittantly does not go into reverse but I put the clutch pedal out and back in and it goes away,

Oct 13, 2014 | Hyundai Accent Cars & Trucks

1 Answer

1998 Honda Civic manual trans will not shift into gears. Car starts, push in clutch and it goes to the floor, release clutch and comes back up. Unable to put into gears. Brake fluid and clutch fluid seem...


Eric, how are you confirming whether or not the car goes into gear if you shift gears without the engine running? One way would be to put it in 1st and see if you can push the car. If you can't, it is in gear.

Another option is to roll the car slightly forward or backward (engine off) while trying to put the car in gear. Once it is in gear, then the car shouldn't move any further. However, if it goes into gear, DO NOT start the car without taking it back out of gear.

The clutch is much more likely to be the problem than the transmission.

If the clutch fluid ever ran dry, then the clutch hydraulics will need to be bled of air. Otherwise, the problem could be the clutch master cylinder, slave cylinder or throwout bearing. Since you didn't report the clutch slipping (e.g. engine revving without accelerating when in gear) it is likely not the clutch disks themselves.

Jun 11, 2014 | Cars & Trucks

1 Answer

Everytime i go to 1st gear its to hard and wont go in easily... clutch pedal is very loose


Try putting it in to gear with the car switched off if it goes in easy it sounds like you have a clutch fault have you had a new clutch or anything done to it

Apr 07, 2014 | 1999 GMC Sonoma

1 Answer

Clutch on my '91 ford explorer


Im pretty sure the vehicle has a bad throw out bearing. That's what's making the noise when you depress the clutch. It would need to be replaced, along with the clutch disc, and pressure plate.

Feb 17, 2013 | 1991 Ford Explorer

1 Answer

I am having problem putting my bmw e90 2005 into first gear. if you put it into 2nd gear and then push it into first it goes in. any ideas.


Try to double clutch when you downshift from 2nd to 1st ( while driving be in 2nd put in the clutch go to neutral pull out clutch rev it a lil and put the clutch back in and then shift to first) what this does is that it aligns the gears and it might go into 1st alot smoother. Happened to my 86 Toyota and never had problem with it after that

Dec 07, 2012 | Cars & Trucks

1 Answer

Car Shakes Violently On 1St Gear


It sounds like you have a blown throw out bearing for the clutch operation. Fix it soon or you'll do a whole lot more damage to the drivetrain.

Dec 04, 2012 | Cars & Trucks

2 Answers

I have a 1993 honda civic and when i put the car in gear and release the clutch my car will not move. what is my problem??


EITHER YOUR CLUCH IS WORN OR THE SLAVE CYLINDER GAVE OUT.. CHECK THE FLUID LEVEL ON THE SLAVE CYLINDER RESERVOIR OR TO BE MORE SURE WHAT IT IS. DO THIS-
BE SURE NO ONE IS IN FRONT OR YOUR NOT GONNA HIT A CAR IN FRONT / WITH THE ENGINE OFF "IGN" ON PUT IT IN 1ST OR 2ND GEAR IT MIGHT BE A LITTLE TRICKY OR ROCK THE CAR WITH ONE LEG MAKE SURE IT GOES IN GEAR. THEN PRESS THE CLUTCH AND TRY STARTING IT IF TRYIES TO TAKE OFF IN GEAR THEN YOUR CLUTCH IS GOOD/ BUT THE SLAVE CYLINDER OR THE A HOSE LEAKED THE FLUID. IF IT STARTS IN YOUR IN GEAR AND THE CAR DONT TAKE OFF THEN ITS YOUR CLUTCH FOR THAT YOU NEED A NEW CLUTCH AND REMOVE THE TRANSMISSION. LET ME KNOW OR SEND ME A FEEDBACK THANSK HOPE THIS HELPS YOU.

Aug 02, 2010 | 1993 Honda Civic 4 Door

1 Answer

No power going to the wheels


Does this happen in all gears or just first? Sounds like you need the clutch adjusted or replaced

Jul 11, 2009 | 1993 Toyota Celica

Not finding what you are looking for?
1993 Toyota Celica Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...