Question about 1995 Buick Roadmaster

Open Question

Replacing the distributor in a 1995 buick roadmaster

Have to repalce the distributor and rotor was wondering how, considering i already see that you have to remove the harmonic balancer to get to it, what else will i have to remove to access this part?

Posted by on

  • Ned C Cook
    Ned C Cook May 11, 2010

    what are you talking about? remove a harmonic balancer to get to the distributor? This is new to me. Please explain.



6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 625 Answers

SOURCE: 95 buick lesabre crankshaft pulley removal

i had used three bolts they have to be 6mm thik and like about 6 inches long then you install some flat washers by the head and use a regular crank pulley remover, you'll see three little holes inside the groevs at front side of pulley and there is where you install the bolts

Posted on Oct 19, 2008

  • 1 Answer

SOURCE: location of the temp sensor on a 95 roadmaster?

Location of the temp sensor on a 95 century

Posted on Mar 06, 2009

  • 3 Answers

SOURCE: pass key stays on1995 buick roadmaster car want crank

Short circuit probably not the problem. The pass key system is not being disabled making the car inoperable, thats why it will not crank. Either you are using a key that does not have the correct resistance(black chip in key) or if it is the same key you always used then the pass key sensor went bad. I believe it is in the steering column and a qualified mechanic could help you there.

Posted on May 30, 2009

  • 7 Answers

SOURCE: harmonic balancer removal 1994 buick lasaber

need specail tool cause of the crank sensor,have loads of un

Posted on Oct 28, 2009

  • 16314 Answers

SOURCE: harmonic balancer wobble will it cause any more

yes besides causing a vibration while driving and possible throwing belts the balancer out of balance can cause problems with the lower end crankshaft such as seal leaks ,bearings and if breaks off or apart can cause damage to engine and body

Posted on Nov 24, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Min. brake rotor thickness for a 1995 buick roadmaster?

Go on a Buick forum, you can find the answer there. I am a member in one and it has a roadmaster section. Lots of smart, helpful members. I don't own a Buick but my son owns a 2005 century, guess who gets to work on it when something goes wrong.

Sep 08, 2014 | Cars & Trucks

1 Answer

How will my 1995 buick roadmaster drive if the distributor is bad

If it has a sensor instead of rote button..then thats the probler

Apr 11, 2013 | 1995 Buick Roadmaster

1 Answer

I put a 91 roadmaster in a chevy truck and now it smokes real bad then it clears up i put a map sensor on it already what else could it be?

since you've replaced the map sensor I'll assume you're dealing with black smoke. a bad coolant and/or intake air temperature sensor could create black smoke, also a bad injector could do it, especially if it's monopoint injection.

Mar 04, 2013 | 1995 Buick Roadmaster

1 Answer

Trying to find a distributor cap and rotor for a '95 buick park avenue ultra

buick chevy and olds all have the same engine the part number might be different but it's the same they only have different number for inventory as long as you give the same engine size

Sep 22, 2012 | 1995 Buick Park Avenue

1 Answer

How to change a fuel pump for a buick roadmaster 1995

you have to drop the gas tank fuel pump is located inside

Mar 27, 2012 | 1995 Buick Roadmaster

1 Answer

1995 buick roadmaster/heater and ac fan staying on

there is a module that controls the motor located arend the blower moter that will need to be replaced. Not sure if this is available other than dealer. check with auto parts stores first. I would ask for blower motor control module.If this helps please reply and good luck

Apr 27, 2010 | 1995 Buick Roadmaster

1 Answer

When taking the distributor off do i need to set the timing of the distributor

Yes. Roll the engine over onto #1 cylinder TDC and remove the distubuter cap. Place a mark on the body of the distributer inline with the rotor point before you do anything else. This mark may already be there, but if not, it needs to be permanent, such as a tiny chisel cut. Now you can withdraw the distributer. When replacing, it may have to engage the oil pump drive, so be careful you engage this properly. If not engaged, the distributer will not go down fully. As you inset the distributer, align the rotor with your mark. Make several attemps until you get it in pace and your mark lined up.You will notice the distributer shaft will turn as you insert it so you need to allow for that. Use a timing light to finally set the ignition timing.

Mar 19, 2010 | 1994 Buick Roadmaster

1 Answer

Replace electronic coil

Although this should be easy to find and replace, you might want to consider investing in an aftermarket service manual from Haynes. They have step-by-step instructions and many photos and line illustrations to help the DIY world and cover everything one can do at home and beyond. We keep one in each of our vehciles.
95 Buick Service manual

Oct 17, 2009 | 1995 Buick Roadmaster

Not finding what you are looking for?
1995 Buick Roadmaster Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts


Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides