Question about 1992 Cadillac Eldorado

1 Answer

How do I get the top of the dash off my 1992 Eldorado? I need to replace the instrument cluster

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 133 Answers

Not hard at all just look inside each vent on left and right side of each is a little tab, stick small screwdriver under and gently pull towards you, do the same on other side, without letting other side slip back, screws are inside there holding dash down.. also remove the defrost grill and carefully take the sensors out, one has tiny phillips screws and the other twists out.. three screws there...good luck not hard really....

Posted on Mar 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instrument cluster illuminates intermittently on 1990 eldorado


If this is the analog intrument cluster and the entire instrument cluster is intermittently losing illumination, remove the instrument cluster light fuse and replace it with a new fuse. It is remotely possible that the actual fuse holder wires have broken due to age and would need to be soldered back together.
If this is the digital instrument cluster and the entire display is going dead, it could be anything from the wiring harness to the BCM. If it is the digital instrument cluster, I can really only recommend taking it to a reputable shop or Cadillac dealer to service.

Dec 21, 2016 | 1990 Cadillac Eldorado

1 Answer

94 eldorado Blown dash cluster fuse


you will have to take the dash cluster out to replace it,and its not easy,get a Haynes repair manual at your auto parts store

Sep 25, 2014 | 1994 Cadillac Eldorado

1 Answer

I needed to replace climate control unit on1997 Grand Am GT. Concerned with how to remove the cluster face panel w/o breaking it.


Let me know if this helps out.

Heater & Air Conditioning
  1. Disconnect the negative battery cable.
  2. Remove the screws securing the cluster trim plate to the instrument panel.
  3. Tilt the top of the cluster trim plate downward releasing the clips that mount the bottom of the trim plate to the dash. Remove the trim plate.
  4. Remove the screws attaching the accessory trim center plate to the dash.
  5. Tilt the top of accessory trim plate downward releasing the clips that mount the bottom of the plate to the instrument panel. Remove the plate.
  6. Remove the screws attaching the control assembly to the dash.
  7. Remove the control assembly from the dash.
  8. Disconnect the control assembly electrical connectors.
  9. Remove the control assembly.

To install:

  1. Install the control assembly.
  2. Connect the control assembly electrical connectors.
  3. Install the control assembly attaching screws.
  4. Push the mounting clips into place and roll the top of the accessory trim plate upward into position.
  5. Install the screws attaching the accessory trim plate to the dash.
  6. Push the mounting clips into place and roll the top of the cluster trim plate upward into position.
  7. Install the screws attaching the cluster trim plate to the instrument panel.
  8. Connect the negative battery cable.
// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 40; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';

Jan 23, 2011 | Pontiac Grand Am Cars & Trucks

1 Answer

1997 cadillac eldorado instrument cluster removal


remove ac vents with flat head screwdriver . thair should be a 7mm bolt in each vent holding tha dash pad on remove them. remove the trim going to head liner from the dash pad. use a 7mm to remove the bolts holding the cluser in place should be one each side and 3 across the back . disconnect the wiring harness and your done. also disconnect the negative batery cable when doing this

Feb 15, 2010 | 1997 Cadillac Eldorado

1 Answer

88 eldorado instrument panel is dead, including speedometer and fuel gauge. None of the digital instrument panel gauges are lit up. How can I troubleshoot this problem? TJ


It sounds like the problem is your dash cluster itself. you should be able to find another dash cluster for an 88 DeVille in almost any junk yard.

Feb 04, 2010 | 1999 Cadillac DeVille

1 Answer

Need to replace dashboard lamp on my 1997 Toyota


You need to pull the instrument cluster out of the dash. This is not a very hard job, but, you can damage the outer dash fascia as it comes off, past the steering wheel.

Move the steering wheel to its lowest position.
Remove the phillips screws that surround the instrument cluster fascia (under the top edge)
Pull the fascia off.
Remove the 4 screws that holds the instrument cluster to the dashboard
Remove the wiring connectors from the back of the cluster assembly, and pull it out. Replace the bulb, and reassemble. The wiring connectors cannot be mixed up, they are all unique.

Nov 10, 2009 | 1997 Toyota Avalon

1 Answer

1992 Honda Accord (LX) Instrument Cluster Replacement


Same as 2 dr, or a stick.
There are bezel screws that hold the plastic trim (pointing up towards the windshield), you nee to remove these 2 screws. The bottom section is clipped in. Tilt the steering wheel down as far as it will go.
Once you have the bezel off, there are 4 screws holding the cluster to the dash. Remove them and gently pull the cluster forward. Reach around (expect to get scraped knuckles) and unclip the speedo cable, and two large multipin connectors. Don't force anything.
Getting the cluster out after this point is a test of your patience. It only seems to come out one particular way.

Aug 17, 2009 | 1992 Honda Accord

1 Answer

Instrument Panel Cluster stopped working


U ARE GOING TO HAVE TO PULL THE INSTRUMENT CLUSTER OUT AND SEND THE ENTIRE UNIT IN FOR REPAIR AT AN AUTHORIZED GM DIDGITAL DASH REPAIR CENTER, YOUR DEALER CAN SUPPLY THRE NAME AND PHOMNE NUMBER, THIS IS NOT A FUSE PROBLEM.

Feb 08, 2009 | 1999 Cadillac Eldorado

Not finding what you are looking for?
1992 Cadillac Eldorado Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...