Runs rich wont pull need to know how to pull codes

NO engine size stated. just V6,, V30 body.
the connector is called DLC, diag. Link connector.
it has may usages, not just the flash code, but is fully documented
and varies by engine option,
6 engines were offered, 2 are v6
2.0 L V6 gasoline (1VZ-FE)
2.5 L V6 gasoline (4VZ-FE) not posting liter size, make answers very very hard,
hint, never work on any engine not knowing which it is.
same for buying parts, x10


\the Toyota has 2 ways,
first off, info is in the FSM, (factory service manual)
and is on alldata.com, login and read. but
is common knowledge, (goggle, like 1mil hits?)
its a jumper wire. on most cars. a paper clip, unbent.


1: DASH CEL LMAP , FLASH CODES.
2: A SCAN TOOL
#1 IS FREE
#2 IS A $150 tool, or rent ,barrow, on any shop on earth can do.

here is a 1 click page, and engine type is needed.
http://www.troublecodes.net/toyota/

2nd google hit.
http://autorepair.about.com/library/a/1h/bl750h.htm


i use this scan tool, it works 100 times better than any flashing
bulb. shows all live sensors, etc.
http://www.amazon.com/INNOVA-3120-Diagnostic-Reader-Vehicles/dp/B000KID2ZC