Question about Pontiac Firebird

1 Answer

Oil pan will not come off

All bolts are out do i need to remove a/c comp

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 30 Answers

Place a piece of wood on the side of the oil pan and hit it witha large hammer. someone used silicone to install it and it is "glued" on to the engine.

Posted on Jun 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to remove the oil pan easy and safe from a 2005 crv honda


Hi Evelyn.here's a link on your oil pan removal,it says engine removal,will send a link on that too. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE Here's the engine removal guide. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE

May 17, 2015 | 2005 Honda CR-V

1 Answer

How to remove oil pan



4x4
1. Open the hood.
2. Disconnect the battery negative cables.
3. Remove the intake air assembly.
4. Remove the radiator shroud retaining bolts.
5. Install engine support fixture # 8534B .
6. Raise and support the vehicle.

WARNING: HOT OIL CAN CAUSE PERSONAL INJURY.


7. Drain the engine oil (Refer to 09 - Engine/Lubrication/OIL - Standard Procedure) .
8. Loosen the front engine mount bolts.
9. Lower the vehicle.
10. Use the engine support fixture # 8534B to raise engine out of the front mounts.
11. Remove the engine oil dipstick.
12. Raise and support the vehicle.
13. Remove oil pan bolts, break the pan to block seal, and lower pan slightly and remove oil suction tube fasteners.
14. Remove oil pan and suction tube.
15. Remove the 2 bolts from the front of the engine block stiffener.
16. Remove the oil pan.


4x2
1. Open the hood.
2. Remove the negative battery cables.
3. Raise and support the vehicle.
4. Remove the transmission oil cooler lines.
5. Remove the propeller shaft.
6. Remove the starter bolts.
7. Support the starter.
8. Remove the torque converter bolts.
9. Remove the exhaust hanger bolts.
10. Remove the gear shift cable.
11. Remove the wiring harness.
12. Remove the transmission mount.
13. Remove the crossover bolts.
14. Position the transmission jack.
15. Remove the bell housing bolts.
16. Remove the transmission.
17. Remove the flywheel housing bolts (8).
18. Remove the flex plate bolts (8).
19. Remove the engine oil dip stick.
20. Drain the oil.
21. Remove the steering rack bolts.
22. Remove the oil pan bolts.
23. Remove the oil pickup bolts.
24. Remove the oil pan. user_online.gif

Aug 01, 2014 | Dodge Ram 3500 Cars & Trucks

1 Answer

How to remove oil pan


jack it up, drain oil from drain plug on oil pan when drained remove and replace oil filter also. remove the pan bolts pull off pan and gasket.put new oil pan gasket on if needed.when oil pan bolts are back in, screw them in hand tight, then torque them down to specs and alter nate the tightening so it wont damage pan seal. any auto parts store can tell you the torque on the bolts for your car. good day!

Mar 31, 2014 | 1999 Chevrolet Venture

1 Answer

Change oil pan on a 2001 sonoma


the 2.2 engine and the 4.3 engine with 2WD MODEL you have to remove engine.the 4WD MODELS, you have to remove all these parts first remove dip stick, drive belt, splash shield, remove front axle shield and the transfer case shield, front skid plate and the flywheel cover,remove left and right engine mount through bolts.then raise the engine using a lifting device, and block in position,using large wooden blocks between the motor mounts and brackets.you will also need to remove these parts,remove disconnect oil cooler line, remove pitman aem bolt and pitman arm, remove idler arm bolts and idler arm, remove front differential through bolts,remove front driveshaft if necessary,remove differential assembly by rolling it forward for clearance, remove starter motor, then remove oil pan bolts then remove oil pan, your oil pan need to be flushed slightly forward of rear of the block to allow proper alignment with the transmission housing.using feeler gauge measure the 3 oil pan to transmission contact points.clearance should not exceed 0.011 in. 0.3mm if so realign the oil pan.oil pan bolts torque is 18 ft lbs tighten oil pan bolts in sequence.

Aug 25, 2012 | Cars & Trucks

2 Answers

When does the oil pan gasket need to be replaced ?


Check this Oil Pan Removal & Installation...

2.0L & 2.2L Engines
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Raise and support the vehicle.
  3. Drain the engine oil.
  4. Remove the engine drive belt.
  5. On the 2.0L engine, remove the intercooler pump bracket bolts from the oil pan.
  6. Remove the lower A/C compressor bolt from the oil pan.
  7. Remove the oil pan bolts.
  8. Remove the oil pan.
To install:
  1. Make sure that the oil pan and mounting surface on the lower crankcase are free of all oil and debris.

2_10_2012_7_06_27_pm.gif

Fig. Apply a 2mm bead of GM P/N 123785251 (Canadian P/N 88901148) around the perimeter of the oil pan and the oil suction port opening-2.0L, 2.2L, & 2.4L engines

  1. Apply a 2 mm bead of GM P/N 123785251 (Canadian P/N 88901148) around the perimeter of the oil pan and the oil suction port opening. Do not over apply the RTV. More than a 2 mm bead is not required.
  2. Install the oil pan.

2_10_2012_7_07_34_pm.gif
Fig. Oil pan bolt torque sequence-2.0L, 2.2L, & 2.4L engines
  1. Install the oil pan bolts in sequence. Tighten the oil pan bolts to 18 ft. lbs. (25 Nm).
  2. Install the A/C compressor bolts. Tighten the bolts to 18 ft. lbs. (25 Nm).
  3. On the 2.0L engine, install the intercooler pump bracket bolts. Tighten the bolts to 18 ft. lbs. (25 Nm).
  4. Install the engine drive belt.
  5. Lower the vehicle.
  6. Fill the engine oil to the proper level.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 10, 2012 | 2006 Chevrolet Cobalt

1 Answer

Changing the tramission filter on a 2007 Saturn Vue Hybrid


Hello and welcome. here is the instructions for removing the trans filter. you will need to drop the bottom trans pan off to gain access to the filter.


  • Remove the oil pan bolts from only the front and the sides.
  • Loosen the rear oil pan bolts about 4 turns.
  • Lightly tap the oil pan with a rubber mallet or pry in order to allow the fluid to drain.
  • Remove the remaining oil pan bolts.
  • Remove the oil pan.
    Install the oil pan attaching bolts.
    Tighten
    Tighten the bolts to 12 N·m (106 lb in).
    c00c848.gif618143d.gif

    Aug 13, 2010 | 2007 Saturn VUE Green Line

    1 Answer

    Oil pump ,,,where is the oil pump located on a 1997 dodge caravan


    Hello
    Welcome!
    Oil pump is located on the oil pan.
    Parts needed,,,oil,,,, oil filter,,,, oil pan gasket,,, oil pump,,,, oil pump pickup tube..
    time to do this,, about 3 hours
    Instructions,
    Raise van place on 2 jack stands
    drain oil remove oil filter fill new filter install.
    remove bolts from oil pan,
    remove oil pan..
    remove 2 bolts that hold oil pump and tube.

    install new pump and tube tork bolts to 45 fp
    replace oil pan gasket and install oil pan
    tork pan bolts to 35" pounds
    install drain plug
    fill with oil
    start and check for leaks

    let me know if i can help more

    Jul 17, 2010 | 1997 Dodge Caravan

    1 Answer

    Need to change oil pan


    e
    Cavalier, Sunfire 2001-2005

    Oil Pan - Removal & Installation

    2.2L (VIN 4) Engine
    1. Before servicing the vehicle, refer to the precautions section.
    2. Drain the engine oil.
    3. Remove or disconnect the following:
      Negative battery cable Right front wheel Right inner fender splash shield Starter motor and bracket Engine mount strut bracket Oil pan
    To install:


    672c0b8.jpg

    Fig. Exploded view of the oil pan mounting and related components-2.2L (VIN 4) engine
    1. Place a 2mm bead of RTV sealer to the oil pan sealing surface except at the rear seal mounting surface. Using a new oil pan rear seal, apply a thin coat of RTV sealer on the end down to the ears.
    2. Install or connect the following:
      Oil pan with a new gasket. Torque the nuts and bolts to 89 inch lbs. (10 Nm). Engine mount strut bracket. Torque the bolts to 49 ft. lbs. (66 Nm). Starter motor and bracket. Torque the bolts to 37 ft. lbs. (50 Nm). Right fender splash shield Right front wheel. Torque the nuts to 100 ft. lbs. (140 Nm). Negative battery cable
    3. Refill the crankcase.
    4. Start the vehicle and verify no leaks.
    2.2L (VIN F) Engine
    1. Before servicing the vehicle, refer to the precautions section.
    2. Drain the engine oil.
    3. Remove or disconnect the following:
      Engine mount strut bracket Drive belt Lower then upper AC compressor bolts Oil pan bolts Oil pan

      1c9e9c9.jpg

      Fig. Remove/Install the oil pan bolts in this sequence-2.2L (VIN F) engine
    To install:
    1. Apply a 2 mm bead of RTV sealant around the perimeter of the oil pan and the oil suction port opening. Do not over apply the RTV. More than a 2 mm bead is not required.
    2. Install or connect the following:
      Oil pan and tighten the bolts to 18 ft. lbs. (25 Nm) AC compressor bolts Engine mount bracket Drive belt
    3. Refill the crankcase.
    4. Start the vehicle and verify no leaks.

    2.4L Engine

    1. Before servicing the vehicle, refer to the precautions section.
    2. Drain the engine oil.
    3. Drain the cooling system.
    4. Remove or disconnect the following:
      Negative battery cable Flywheel/converter cover Right wheel Right wheel well splash shield Accessory drive belt Air conditioning compressor lower bolts Transmission-to-engine brace Engine mount strut bracket Radiator outlet pipe bolts Radiator outlet pipe from the oil pan Oil pan to the flywheel cover bolt and nut Flywheel cover stud for clearance Radiator outlet pipe from the lower radiator hose and oil pan Oil level sensor connector Oil pan
    To install:
    1. Inspect the oil pan gasket; it is reusable if not damaged.
    2. Install or connect the following:
      Oil pan with the gasket. Torque the M8 bolts to 18 ft. lbs. (24 Nm) and the M6 bolts to 106 inch lbs. (12 Nm).

      2ffc5e9.jpg

      Fig. Oil pan fastener torque specifications-2.4L engine
      Oil pan to the transmission nut Oil level sensor connector Radiator outlet pipe to the lower radiator hose and oil pan Exhaust manifold brace Radiator outlet pipe. Torque the bolts to 124 inch lbs. (14 Nm). Engine mount strut bracket. Torque the bolts to 55 ft. lbs. (75 Nm). Transmission to the engine brace Air conditioning compressor lower bolts. Torque the bolts to 37 ft. lbs. (50 Nm). Accessory drive belt Right splash shield Right front wheel Flywheel/converter cover Negative battery cable
    3. Refill the crankcase.
    4. Refill the cooling system.
    5. Start the vehicle and verify no leaks.

    Hope helped (remember rated this help). Good luck.

    Oct 22, 2009 | 2001 Chevrolet Cavalier

    1 Answer

    How do I change the tranny fluid in my 1998 cadillac catera


    Fluid - A/T: Service and Repair
    Transmission Fluid and Oil Filter Changing
    REMOVAL PROCEDURE
    1. Raise and suitably support the vehicle. Refer to Vehicle Lift Points.
    2. Place drain pan under pan
    3. Remove oil pan bolts from front and sides only.
    4. Loosen the rear oil pan bolts approximately four turns.
    5. Lightly tap the oil pan with a rubber mallet or pry to drain the fluid from main case.
    6. Remove the oil pan bolts from rear oil pan and gasket.
    7. Remove front oil pan bolts leaving one corner bolt in loosely.
    8. Lightly tap oil pan with rubber mallet or pry to drain fluid.
    9. Remove the following remaining components:
    ^ The front oil pan bolts
    ^ The oil pan
    ^ The gasket
    10. Remove the oil filter bolts and filter.
    11. Clean the following components:
    ^ The transmission case
    ^ The front adapter case
    ^ The oil pan gasket surfaces with solvent
    ^ Air dry
    ^ All traces of gasket material must be removed
    INSTALLATION PROCEDURE
    1. Install the gasket.
    2. Install the oil filter.
    3. Install the bolts.
    ^ Tighten the transmission oil filter bolts to 20 Nm (15 ft. lbs.).
    NOTICE: Refer to Fastener Notice in Service Precautions.
    4. Install the front oil pan.
    5. Install the front oil pan gasket
    6. Install the front oil pan bolts
    ^ Tighten the front oil pan bolts to 11 Nm (96 inch lbs.).
    7. Install the following components:
    ^ Install the pan
    ^ Install the gasket
    ^ Install the bolts
    ^ Tighten the oil pan bolts to 11 Nm (96 inch lbs.).
    8. Refill the transmission with DEXRON III through oil pan fill plug on the side of the (main case) oil pan. Fill the transmission to lower edge of oil
    pan fill. Fill plug opening using and oil suction gun.
    ^ Tighten the oil pan fill plug to 45 Nm (33 ft. lbs.).
    9. Lower the vehicle.
    10. Check the transmission fluid level. Refer to Transmission Fluid Checking Procedure.

    Sep 13, 2009 | 1998 Cadillac Catera

    1 Answer

    I cracked my oil pan and i need to know if i need to take out my engin to change it i'm low on cash i need help


    here's v6 3.8L

    Section 03-01A: Engine, 3.8L 1996 Thunderbird, Cougar Workshop Manual
    IN-VEHICLE SERVICE Oil Pan/Oil Pump Screen Cover and Tube Removal
    1. Disconnect battery ground cable (14301).
    1. Remove air cleaner outlet tube (9B659). Refer to Section 03-12 .
    1. Remove two bolts retaining radiator upper sight shield (8C291) and position radiator upper sight shield aside.
    1. Remove hood weather seal.
    1. Remove windshield wipers.
    1. Remove LH cowl vent screen and wiper module.
    1. Install Three Bar Engine Support D88L-6000-A or equivalent.
    1. Raise vehicle on a hoist. Refer to Section 00-02 .
    1. Remove front engine support insulator through-bolts.
    1. Partially lower vehicle.
    1. Raise engine and support with Three Bar Engine Support D88L-6000-A or equivalent.
    1. Raise vehicle.
    1. Remove starter motor (11002).
    1. Position drain pan.
    1. Drain engine oil.
    1. Remove oil bypass filter (6714).
    1. Remove starter motor wire, ground strap and automatic transmission oil cooler lines.
    1. Remove oil pan-to-bell housing bolts and bolts at crankshaft position sensor lower shield.
    1. Remove remaining oil pan retaining bolts.
    1. Remove steering shaft pinch bolt and separate steering shaft.
    1. Position transmission jack under front sub-frame (5C145).
    1. Remove six rearward bolts on front sub-frame. Loosen two forward front sub-frame bolts.
    1. Remove lower shock absorber-to-front suspension lower arm bolts and nuts (both sides).
    1. Lower front sub-frame.
    1. Remove oil pan (6675).
    1. Empty any residual oil from oil pan.
    1. Remove oil pump screen cover and tube retainer bolts and support bracket nut. Remove oil pump screen cover and tube (6622) and discard oil pump inlet tube gasket (6626).

    Apr 14, 2009 | 1996 Ford Thunderbird LX

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    59 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Pontiac Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8172 Answers

    Are you a Pontiac Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...