What is the compression on 3.3 liter 2005 chrysler supposed to be?

Question edited to add maker.

Chrysler 300 Transmission Fluid Capacity and ... - Engineswork

https://engineswork.com > oil-capacity > chrysler-300-t...
2005 2006 2007 2008 2009 2010 Chrysler 300 Transmission Fluid Capacity ; 4-speed 42RLE automatic transmission, Total Fill 8.3 liters (8.8 quarts) ; 5-speed NAG1 ...

You'll definitely find solutions here. It's very useful. I bought from here too for my cars Chrysler 300 300C STR 8 Magnum 2005 Repair Service
Best of luck!!!!!!!

If the shifter moves and the transmission is not changing then it could be a linkage issue. In any event this could be a TCM also.

95 LHS- 3,518 cc 3.5 liters 6 V front longitudinal engine with 96 mm bore, 81 mm stroke, 10.5 compression ratio, overhead cam and four valves per cylinder
95 Concorde - 3,301 cc 3.3 liters 6 V front longitudinal engine with 93 mm bore, 81 mm stroke, 8.9 compression ratio, overhead valve and two valves per cylinder

Some of the parts may enter change but they are diffrent. Best of luck!

thing is you only need to swap the senors on those engines not the computer

153624 on a six cylinder. This should be in cast on the intake manifold. To locate what tower to use on the cap, do this. pull the #1 plug. Bring it to tdc on the compression stroke. Now chk out where the rotor is pointing and that's the tower for #1. Good Luck -Ned-

It will vary too much between gauges to give you a definitive answer, probably between 150 and 175. The key thing you should be looking for is consistency. Crank the engine for the same amount of time for each cylinder, about 3 seconds. The readings should all be very close to each other, within about 15%.

36-48 inch extension with swivel socket and flash light!

yes ...it is a supposed safety feature