Question about 1996 Oldsmobile Achieva

1 Answer

Driver side door inside panel

Dent in driver side door need to know how to get inside panel off to pop dent back out

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

Look behind handle for screw under a little plastic plate, same in side grip where you close door, maybe 1 more behind relector on door if equipped with one, then pull door slowly away, you will hear pops when doing this, it is ok. they are plastic screw kida things but they shouldnt break. if they fall out, you will need them to put door back on

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removal of rear door lift hatch interior plastic panel on a 2005 Dodge Grand Caravan to push out dent in metal door from the inside.


The rear door panel is secured to the door using screws and clips. The screws will be in the handle used to close the door and there may be plastic plugs in the handle hiding the screws. Once these screws are removed, the handle will come off. Look for any more screws along the panel. If there are more, they will be visible. Once the screws are removed, pull on the panel to release the clips that secure it to the door. These clips will require some force to release them and will make a snap/pop sound once released. You may have to put a screwdriver/wedge between the panel and door to start the process of releasing the clips

Jan 20, 2016 | 2005 Dodge Grand Caravan

1 Answer

1994 Mercury Topaz Fender Removal


Harbor Freight and most local body shop supply stores should have a suction-cup type tool for pulling out dents. You maybe able to remove the inner fender well to get to the dent. To remove the fender, you'll need to remove the top fender bolts, the bolts that attach it to the header panel, and the bolts holding it on back by the door.

Jun 03, 2010 | 1994 Mercury Topaz

1 Answer

All my power windows are working from the driver


the body shop may have removed the inside door panel to knock the dent out to do this you have to disconect the electric window conector block they might have forgot to reconect it .it is located behind the door panel

Nov 03, 2009 | 2003 Lexus ES 300

1 Answer

I need to remove the interior panel on the driver side of a 2002 2 door Chevy Cavalier so I can get at a dent behind the driver's door. How do I remove that panel?


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. then you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Aug 16, 2009 | Chevrolet Cavalier Cars & Trucks

1 Answer

Need to open door panel


there are a series of screws around the bottom of the door panel and some in the center in the handle or under it and you will have to pull the door panel off it will seem stuck but if u get a corner off you can see the push pops which are flanged plastic that hold the panel on tightly all around if they break you can buy new ones at most auto parts stores

May 19, 2009 | 2003 Ford ZX2

1 Answer

How to remove door panel of passenger side on honda civic 2008, just to repair a small dent from inside


it s easy just look on panel for caps remove with small scerw driver they should just pop out remove all screws there should be 2 near arm rest area and near handle then there are plastic clips just gently pull on panel near clips when panel is loose disconnect wiring for light or power locks window ect. if u have manual window u need tool to remove window handles

Mar 28, 2009 | 2003 Honda Civic

1 Answer

I want to pop off the back door inside panel.


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Mar 16, 2009 | 2005 Jeep Liberty

1 Answer

Need to remove back door panel


first buy a tool from cdn tire or an auto store call "door panel trim pad" ....looks like a large bent screwdriver with a groove on the end ...this will allow you to successfully remove the 4 panel pins you will see after you take off the handle strap mechanism and the two rubber stabilizers on either side of the liftgate...then carefully pry back the panel on the side and you will see the first set of pins ...one per side ....wiggle the pad trim remover in so that it engages the pin above the moulded post on the inside of the panel and prey up on the tool...like a hammer removing a nail ...shouldn't have too much problem getting these off ...further up the panel again going in from the side you will see the other pins ...same procedure ....now all that is left are 5 snap in moulded tabs(part of the actual panel itself ...one on each side of the window frame position of the panel about halfway up the window ...use the tool again as a lever and they will come out easily ...hold on to the panel carefully as the remaining 3 tabs are in top of the frame portion of the panel and not much is supporting the panel now except you...they disengage pretty easily as well ...now the panel is off ...while you are in there put some extra padding on the speakers by dropping them down and putting 1/4 in foam tape on the inside lip of the speaker rim ...these rattle in cold weather ...when you are putting the panel back start with the top 3 tabs and the the 2 side tabs ,one side after the other ...then the panel will support itself while you direct the sabre ends on the pin fasteners into the holes in the metal door ...used my head to snap them in position ...then reinstall the stabilizer rubbers and the back strap ....hope it goes well ...nothing to be worried about after i did it once ,,,David Little Toronto

Mar 15, 2009 | 2006 Chevrolet Uplander

1 Answer

Need to take off driver side door panel to pound out dent


your best bet is either replace the door by going to a junk yard or go to a local autobody shop where they have the tools to fix the problem

Mar 13, 2009 | 1999 Honda Accord

1 Answer

Back door panel removal


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls

Oct 18, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
1996 Oldsmobile Achieva Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...