Question about 1992 Toyota Celica

2 Answers

92 gt4 celica seems thers pressure pushin oil out the breather at the top of engine and its goin in2 the air intake bhind airflow meter and ruing thru turbo and dripin out b.o.v and going in2 intake manifold via topmount intercooler

Posted by on

  • cy schousboe May 11, 2010

    Have you checked your PCV valve to make sure it's working? Pull it out and shake it. Itshould rattle freely. IF it doesn't or is slow, change it first.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 35 Answers

I agree WANT33s. This sounds like Blow-By in the cylinders. This is a rebuild situation. I would look for a used motor as opposed to trying to rebuild the one you have. Also, learn to take your foot out of the TURBO! That's what caused the problem to begin with. The power is fun, but it comes at a cost. This is the cost.
To test this, just do a compression test. If you get any cylinders come up under 170psi, your rings are shot and\or the cylinders have "footballed". Oh, and invest some coin in Synthetic motor oil for the replacement. Turbos wear out conventional oil FAST! It's that loss of viscosity that causes your rings and cylinder walls to wear out ahead of their time.
Check the compression and list what you find out.

Posted on Jul 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 138 Answers

This problem is called blow-by.. There could be a few different things that have caused it but the cure is the same... New piston rings are needed..
Probably pay to rebuild or replace the whole engine.

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why in oil coming air cleaner intake hose? Leaves a puddle every time I stop.


Hi
The engine produce little oil steam when is at normal temperature, this is normal.
This steam goes to the air cleaner for recycling.
Now, the reasons to see oil dripping from the air cleaner are:
Engine oil overfilled, or engine breather valve( if fitted) faulty, or the piston rings causing the pressure to scape into the oil sump ( this means engine damage).
get a technician to chem it.
good luck.

May 04, 2014 | Chevrolet Venture Cars & Trucks

4 Answers

93 Grand Am 3.3, engine dies when hot


Start checking air intake and air filter,

The ECU (car computer module) must be connected to a code reader and scanned, with engine light on, probably it is a computer problem.

Sep 02, 2008 | 1993 Pontiac Grand Am

1 Answer

Air pressure coming from oil filler neck


Could be any one of a number of problems but first i would check the engine breather which will be a tube from the rocker cover to the air intake as in this tube could be a gauze wire filter and this might need cleaning but iam not familar with this engine so i honestly couldnt tell you where to look for the breather or even what it looks like on this engine which iam assuming is a indian built engine .

Feb 15, 2012 | Maruti 800 Cars & Trucks

2 Answers

2001 saturn with a 2.2 has oil coming from breather on top of valve cover causing it to puddle in air intake.Also have noticed odd noises coming from valve cover area.I had the engine running and removed...


pvc .valve could be defective or Eng worn out hope it is the first replace pvc. you can tell how thee engine is by having a wet & dry compression check done

Mar 12, 2010 | Saturn SL Cars & Trucks

2 Answers

Oil leaking on 1987 911 porsche around base of back topside motor


This is almost always the pressure sending unit for the oil pressure gauge. It is located at back topside of the motor, slightly to the right of the center of the engine. It is buried beneath the intake manifold.

Jan 22, 2010 | 1987 Porsche 911

1 Answer

I have a 92 toyota celica which has had the hose that goes from the air filter to the engine come off. Duct tape is currently holding to gether but I have to replase that all the time so I was wonder how...


You really need to get the correct part. Try a scrapyard first. It is critical that there are no air leaks between the air flow meter and the intake manifold. I would not recommend a coupler,they can leak.

Sep 17, 2009 | 1992 Toyota Celica

2 Answers

90 celica gt4


check cam sensor

Jul 22, 2009 | 1990 Toyota Celica

1 Answer

Peugeot 405 oil blows out of the oil filler


yes their is a breather pipe but if its that bad then either its completly blocked or you need a engine rebuild.The breather is on the front of the engine with a pipe running to the air intake and the dip stick is in the top

Mar 03, 2009 | 1991 Peugeot 405

1 Answer

Celica gt4 st2o5


replace all your spark plugs and leads
check the thread ware in the engine

Aug 28, 2008 | 1996 Toyota Celica

1 Answer

1996 celica gt4


bet it is the distributor. I did the Stanza that I have and it was oil in the distributor. It would not ahve been caused by too much oil as a half of a quart is not going to do anything to the car. Remember, if you overfill the oil by over a quart there is a chance of the crank whipping it up into a foam and the air bubbles would trash your bearings as air won't lubricate the engine. Just take the distributor apart and see if it has oil in it.

Jun 22, 2008 | 1996 Toyota Celica

Not finding what you are looking for?
1992 Toyota Celica Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...