When I am leaving in my truck of a morning or evening you have to crank on the motor for a few seconds before the engine will start up. Doesn;t matter if the engine is cold or hot. The truck has 155000 miles on it.
Comments:
Jun 25, 2009
- Thank you for your quick responce. I will try the fuel pump.
Jun 25, 2009
- The fuel filter has been replaced, but I will try the other. Thank you
Jun 25, 2009
- Thank you I have a auto zone within a couple miles
Try cycling the ignition on and off three times, Turn the ignition to the run till the check engine light turns off on the dash and then turn it off and do it again three times to pressurize the fuel line. Then start it, your fuel filter may be dirt or the fuel check valve at the fuel pump may be bad making you loose your fuel prime. Start with replacing the fuel filter first and let me know if that helps and let me know if cycling the ignition to pressurize the fuel line helped.
Comments:
Jun 25, 2009
- If there is a Auto Zone around your area, lone out the fuel pressure gauge and do a fuel pressure check from the Shredder Valve. Auto Zone will have the step by step instruction to check your Fuel pressure and also check for the fuel pressure drop. If it's drops too quick, you may have a bad fuel pressure regulator or a bad check valve at the fuel pump. Thinking that it's going to be the fuel pump since they have a life of around 150,000 miles. Keep me posted, be glad to help.If you do have to replace the fuel pump, it's in the gas tank but you don't have to drop the gas thank. Just you and a few friends can lift the bed of the truck, there is like around 8 bolts holding the bed to the frame.
Cam shaft timing 2000 chevy S-10 4.3 (w) what should it be +3 -3 degrees? I know the computer sets...
(More)
Cam shaft timing 2000 chevy S-10 4.3 (w) what should it be +3 -3 degrees? I know the computer sets the timing, but you can still move the distributor. I've have it set +3 degrees.,checked with a scanner.
ive tried to replace the o-rings on leaky injector didnt work twice. Replaced two injectors and...
(More)
ive tried to replace the o-rings on leaky injector didnt work twice. Replaced two injectors and fuel gushed out. What am I doin wrong? 95' s10 5 spd
Hi I have a 2000 chevy s10 pickup and I have a problem with my 4wd. I tried to kick it in last night...
(More)
Hi I have a 2000 chevy s10 pickup and I have a problem with my 4wd. I tried to kick it in last night when it was snowing and all the 4Hi will do is blink then go back to 2wd. I tried it again this morning and now both 4Hi and 4Lo blink at the same time then nothing lit up. After trying again I can get it into 4Lo and 4Hi but it seems like 4Lo is the only one doing anything and both lights still blink when I'm pressing them. Is there anything I can do myself to fix this? Thanks for the help