2002 Renault Clio Logo
A
Anonymous Posted on Jun 05, 2014

Renault clio fault finder

Ihave the electric warning light ,on all the time, but the car runs fine,starts first time,and runs great with full power

  • mike simpson Jun 06, 2014

    Hi Anonymous, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?which lite is it what does it say on the light? if check engine or service engine soon then just disconnect the negitive battery cable for 5 min, and reattach, that should clear temp code mike

  • mike simpson Jun 06, 2014

    Hi Anonymous, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?which lite is it what does it say on the light? if check engine or service engine soon then just disconnect the negitive battery cable for 5 min, and reattach, that should clear temp code mike

×

1 Answer

bgjh

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 3 Answers
  • Posted on Jun 06, 2014
bgjh
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jan 02, 2010
Answers
3
Questions
2
Helped
8046
Points
3

This may help show if you have a problem - it may even reset the light. With your ignition off, press in the button on the end of your wiper stalk(rt of steering wheel), still holding it pressed in, turn your ignition key but do not start the engine. All the dash lights should come on, a bleep/bell will sound every second, and your speed and revs dials will jump to different places in time with the sound. Press the stalk button once and the amount of fuel should be indicated in the mileage display area eg 25 L. Press it a second time and it will change - I don't know what this is but mine reads 0.0, a third time could be interesting as this indicates where you might have a fault - in one of 4 areas - . If no problem detected then simply four dashes viz - - - -, you might have - - E - for electrical; press it again and you go back to the amount of fuel. Lastly, if you press the mileage select button, this resets (I believe) the fault codes and might also reset your lamp. Everything goes back to normal. Now start your engine and see if the red light is there - turn it off again and repeat the procedure to see if anything has changed. Good luck!

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Aug 18, 2008

SOURCE: Renault Clio overheating

HI IS THE HEATER INSIDE THE CAR WORKING AS GOOD AS IT NORMALY DOES.
IF THE HEATER IS NOT AS GOOD AS IT WAS OR IS COLD YOU MAY HAVE A START OF A HEAD GASKET GOING AS YOU WILL HAVE AN AIR LOCK IN THE WATER SYSTEM THATS WHY YOUR CAR IS RUNNING HOTTER I HOPE THIS IS HELPFUL TO YOU CHEERS STEVE

Ad

Anonymous

  • 1 Answer
  • Posted on Feb 07, 2009

SOURCE: Emissions warning light on Renault Grand Scenic II, 2004 1.5 DCi

i have a renult scinic 2004 1400cc emissions warning light on running uneeven and loss of power can this be sorted out what is it

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Feb 28, 2009

SOURCE: renault clio 2ltr sport back brakes

two brake shoes with a auto adjuster at the top ,handbrake lever on right shoe and two return springs .if you cant remember take the other side off and look at that

Anonymous

  • 1 Answer
  • Posted on Apr 30, 2009

SOURCE: warning lights on dashboard

Try pressing the D3 button on your gear shift - little button below the main one. D3 allows for quick acceleration, but the light also shows when the car is locked is gear ('limp home mode') due to another problem.

Anonymous

  • 2 Answers
  • Posted on Jul 03, 2009

SOURCE: renault modus dashboard warning light 'check

Not necessarily catalytic convertor. this happened on mine recently and it just needed a coil replacing. Costs about £87 at a Renault garage if this is the case

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

My renault clio 2014 canot start warning breaking system fault

Sometimes this can be a low battery fault try charging it or put a spare to it. See if you can get an OBD2 reader.
0helpful
1answer

I have a renault clio automatic, which i have jut bought. It is apt to get stuck into limp mode, and do 5mph, when the petol warning light comes on. What causes the problem?

Sounds like a fuel delivery problem if it is associated with the low fuel warning light.I wonder if it is fuel gauge isn't really relaying soon enough that you are low on fuel and by the time it does you are running on fumes.it could be a fuel filter that has water ingress or debris from an almost empty tank.who knows?First get the car checked at any garage for the diagnostic error codes that will be stored on the onboard ecu.
this is usually a free service.the limp mode episodes will be recorded by error codes which will pinpoint fuel issues, electrical issues etc.Otherwise you will be trying to go through a fix list that costs you time and money .
0helpful
1answer

Renault Clio Series, 1.4 16valve - starting problems.

clio can get problems with the dispacks fitted to the spark plugs. i would check them. the stop is to say something is wrong, if it don't get a signal or a voltage drop when something is turned on it turns off ecu functions. my friend had this model and had the same fault, replaced them and the fault went away. usually get a misfire when they on way out, but sometimes they just die.
0helpful
1answer

Central locking wiring clio

I had a problem where my key fob did not lock or unlock the car, Renault Clio Dynamique, but the central locking button in the car did still work and engine turned over fine. Changed the key fob battery still nothing. Read online about disconnecting and reconnecting the car battery, (negative only) and hey presto it worked! All working fine now!
0helpful
1answer

Hi I have a 02 Clio expression that runs fine but occasionally cuts out and won't start until left for about 30 minutes

try crank position sensor. but would recommend having the car on a fault diagnostic machine to establish a fault code, hope this helps
3helpful
2answers

Warning lights on dashboard

Try pressing the D3 button on your gear shift - little button below the main one. D3 allows for quick acceleration, but the light also shows when the car is locked is gear ('limp home mode') due to another problem.
3helpful
4answers

Emissions warning light on Renault Grand Scenic II, 2004 1.5 DCi

i have a renult scinic 2004 1400cc emissions warning light on running uneeven and loss of power can this be sorted out what is it
Not finding what you are looking for?

427 views

Ask a Question

Usually answered in minutes!

Top Renault Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...