Question about 2000 Chevrolet S-10

2 Answers

My break and abs light came on. I have appeal fluids in tanks and have changed the battery, What could be the problem?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Chevrolet Master
  • 3,854 Answers

Check the fuse to see if your ABS brake fuse has blown, the other thing to is your ABS sensor at the wheel hub may be dirty and needs to be cleaned or re-gaped. Check the wire harness to the sensor too, look for corrosion and damaged wire connections. Start with that and hope this helps. If there is an Auto Zone, have the S 10 scanned since it's free of charge. Just want to make sure that the ABD module has not gone bad and would show in the DTC codes. Good luck and keep me posted. 

Posted on Jun 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 75,817 Answers

HAVE A GM DEALER TEST THE SYSTEM FOR THE TROUBLE CODE THAT IS STORED WITH THE LIGHTS STAYING ON, THIS TAKES A SCANNER CALLED A TECH2, GM ONLY TESTER, UNTIL U DO THIS TEST THERE IS NO WAY TO KNOW THE PROBLEM, ALL THE MAIN SYSTEM PARTS ARE AROUND $500, SO HAVE IT TESTED.

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai trijet just had abs ring changed on passenger front now abs light stays on and hand break light stays on. Help.


If a wire was broken replacing the reluctor ring, this would be the ABS light. Not the brake light. Check the brake fluid, check the E brake pedal/handle. The rings do break, I just weld them back in place. If they are gone, it gets a new axle.

Sep 11, 2016 | 2005 Hyundai Trajet 2.0

1 Answer

Abs and hand brake light is on ... ?


It's not just hand break light , when the brake system master cylinder runs low on brake fluid , has a leak or the brake pads need to be replaced that light also comes on. And it will come on with the ABS light when a problem accrues. Problems can also happen when changing the battery with out hooking up an alternative power source > Battery Disconnect or Replacement Problems

Jul 21, 2016 | Cars & Trucks

1 Answer

Break lights on


Check the abs module for trouble codes. You will need a high end scan tool or a specific abs code reader to do it. The brake light is on likely because the abs light is on. The airbag light might be a different story. Does the horn and cruise work?

Jan 23, 2012 | 1999 Dodge Caravan

2 Answers

My ABS light came on in my 99 honda accord what does it mean?


Normally when your abs light comes on, that is referring to your breaks. This could be low break fluid, leak in break hose somewhere, or need breaks checked. Most cars now a days, have a sensor that is part of and hooked up to your breaks, and that will trigger your abs system (which is breaks) and let you know if your pads are low, or to the ware mark. So Here is what you first do, is check your break fluid and make sure that resavor is full, check under car to make sure there is no leaks, under car and inside each wheel area where breaks are, and then next step, is Les Swab can check your breaks for free and let you know if your pads are down to the ware mark. Let me know, Mike

Sep 14, 2011 | Honda Accord Cars & Trucks

1 Answer

Battery light and break light comes on i just had new breaks and battery put in


If brake and abs light come on check the brake fluid level first

Dec 01, 2010 | 2002 Kia Sportage

1 Answer

MY BREAK AND ABS LIGHTS KEEP COMMING ON.


It could be the ABS unit it's self that is at fault

Mar 18, 2010 | 1994 Ford F150 Styleside Supercab

1 Answer

1993 LS 4WD Brakes problem


get mechanic to check and change offending part as experience is required to do it,just check the pipes leading to it in case theyre loose

Jan 04, 2009 | 1993 Subaru Legacy

1 Answer

On dash board fuel empty light does no display but ABS display


the fuel light might possibly just be burned out, easy fix, the abs light could be because of low brake fluid pressure, or some other brake problem, hope this helps

Dec 27, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...