Question about 2000 Chrysler LHS

1 Answer

Blinker and flasher does not work

My blinkers and flashers will not turn on in my Chrysler lhs 2000 and at first it would work on and off then it went to working for like 3 blinks and stop and now it does not work at all...i heard it was a switch how much can i get that for the dealership told me close to 200$ but i want to see if i can get one for cheaper if that is the problem

Posted by on

  • lwhite667 Jun 25, 2009

    thank you i will check that out



×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 207 Answers

You might want to see if there is a flasher relay on you car a auto parts store can tell you they are cheap around 8 to 25 dollars i would start there first if they are not flashing

Posted on Jun 25, 2009

  • thomas foster
    thomas foster Jun 25, 2009

    does your blinker light light up at all when you turn them on? if not change the bulb as well

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a diagram for how to find the flasher in a 1999 dodge stratus..it's not in the fuse boxes


Simple method without mystery:
  1. Turn blinker flashers on;
  2. Listen for clicking;
  3. Find source of clicking. It is the flasher. :)
NOTE: Emergency flashers and blinkers usually use a separate flasher unit, but one is close to the other. If your blinkers do not work but your emergency flashers do, find the emergency flasher unit by finding the source of clicking, then locate the blinker flasher nearby. They will ALWAYS be underneath the dashboard on the driver side.

May 11, 2015 | 1999 Dodge Stratus

1 Answer

Where is the flasher located?


Are you are referring to the flasher/blinker relay? If so it will most likely be round and silver plugged into the fuse box. If you are referring to the button it may be on top of the steering column or behind the blinker lever.

Aug 14, 2014 | 2000 Chrysler Cirrus

2 Answers

Chrysler Vision hazard light


on some of these models, the hazard switch operates through its own flasher fuse. if this is the case, locating and replacing the fuse ($4) should do it. Location should be in the owners manual.

Nov 10, 2013 | 1997 Chrysler LHS

1 Answer

Blinkers do not stay on. flashers work. Brake


you need a new turn signal flasher

Sep 01, 2010 | 1998 Ford Explorer

1 Answer

My blinkers do not work on my 1999 chrysler 300m.


try replacing the flasher, the flasher must come from the dealer most aftermarket flasher wont work in chryslers, start with the flasher.

May 15, 2010 | 1999 Chrysler Sebring

1 Answer

2000 sebring convertible blinkers and flashers are inop all fuses are good .cant find flasher relay , thak you


go buy a HAYNES manual for your car at the autoparts store and find the diagrams and pictures of where the flasher relay is located.

Oct 18, 2009 | 2000 Chrysler Sebring

1 Answer

Which relay controls the right blinker on a 97 LHS, there are several in the engine fuse compartment.


I think there is only one relay for the turn signals, and one relay for the four way flashers. The cover should tell which relay is for what device

Jun 30, 2009 | 1997 Chrysler LHS

3 Answers

Blinker stopped working, but the hazard lights still work - I think it's a blown fuse but how and where do I fix the fuse


There is 2 different flashers. One flasher for the turn signals and one flasher for the hazards. If you turn on the turn signals and the turn indicator on the dash lights up but doesn't blink, then most likely it is the turn signal flasher that is bad. Good luck.

May 29, 2009 | 1998 Chrysler Sebring

Not finding what you are looking for?
2000 Chrysler LHS Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...