Question about 1998 GMC Jimmy

1 Answer

What is the hub nut size for a 98 4x4 jimmy - 1998 GMC Jimmy

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

12 mm by 1.50 pitch is the nut the socket you need is a 19 mm

Posted on Jun 25, 2009

  • mike loshbough
    mike loshbough Jun 25, 2009

    the axle nut is 36mm socket

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
VWdan
  • 114 Answers

SOURCE: 1999 jimmy 4X4 front hub replacement

try a 34 or 36mm I think its a 36m

Posted on Apr 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size socket do i need for the drive axle/hub nut for a 1997 Chevrolet Cavalier?


I think that one is a 32mm...could b wrong tho..
I'd grab my 32 and 36 if I were going to take it off without looking

Sep 02, 2014 | 1997 Chevrolet Cavalier

1 Answer

Ba falcon hub nut size


Hi just replaced the hub on 2000 au the size of the hub is 36mm the metal jacket has to do with the tension i think hope this helps cheers.

Jun 07, 2014 | 2005 Ford Falcon

1 Answer

What is the torque setting on a gmc jimmy 1999 front wheel hub 36mm nut.


the torque for the outter axle nut at the wheel for a 1998 gmc jimmy is 103 ft lbs. hope this helps.

Jun 15, 2010 | 1998 GMC Jimmy

1 Answer

How to get to the front bearrings to grease them on my 2000 gmc jimmy


If it's a 4x4 they can't be greased. The bearing is pressed into the hub.

If it's 4x2 you'll have to remove the caliper. Take off the dust cover on the rotor. Remove the cotter pin, spindle nut, and washer, to pull the rotor off and grease the inner bearing.

If it's 4x4...Loosen the lugs. Remove the axle shaft nut and washer. Jack it up. Pull the wheel. Remove the caliper/bracket. Trace the ABS sensor wire into the inner fender and unplug it. Remove the nuts/clips that hold the wire from moving around. Look on the back of the hub (spindle) for the three bolts that hold the hub and bearing in place. Remove them and pull out the hub and bearing.

Mar 14, 2010 | 2000 GMC Jimmy

1 Answer

Replacing the right wheel bearing how do u remove that hub do u need a special tool for it


is it a 4x4? the wheel bearing comes with a new hub assembley . Just find out what size the front half shaft nut/ lock nut/axle nut- is. its probably a 33mm thats the only special tool you will need. Unscrew it, take your outer tie rod off the spindle/steering knuckle, theres 3 bolts behind it, take them off then disconect the abs harness and pry out the old hub assembley use a rubber hammer (dead blow hammer) to tap the half shaft out if seized. when installing the new wheel bearing see your manufacturer specs. for torquing the axle nut back on.

Feb 16, 2010 | 2001 GMC Jimmy

1 Answer

Hub nut size 99 chrysler cirrus


it takes a 32mm socket to remove front hub nut on these vehicles

Sep 18, 2009 | 1999 Chrysler Cirrus

1 Answer

1999 jimmy 4X4 front hub replacement


try a 34 or 36mm I think its a 36m

Apr 25, 2009 | 1998 GMC Jimmy

2 Answers

98 gmc jimmy front hub


1. Put the vehicle in gear, apply the parking brake and break loose the driveaxle/hub nut with a socket and large breaker bar.
2. Loosen the wheel lug nuts, raise the vehicle and support is securely on lackstands. Remove the wheel. Remove the driveaxle/hub nut.
3. Unbolt the brake caliper and hang it out of the way with wire. Remove the brake disc.
4. On models with four wheel ABS, trace the electrical lead for the wheel speed sensor along the upper control arm, then forward along the frame rail and unplug the electrical connector.
5. Remove the hub assembly-to-steering knuckle bolts. Remove the brake disc shield and wheel speed sensor assembly and set aside.
6. Tap the hub assembly from side-to-side to break it loose from the steering knuckle. Pull the hub assembly off the end of the driveaxle. Wrap the end of the driveaxle with a rag to prevent damaging it. If the hub is stuck on the splines on the end of the driveaxle, use a puller to free it.
7. Installation is reverse of removal process. Be sure to lubricate the driveaxle splines with multi-purpose grease, and tighten all of the fasteners to the proper torque.

Jan 27, 2009 | 1998 GMC Jimmy

1 Answer

Rear wheel hub nut


I used a 32 mm to remove hub nut on front. I guess it would be the same for back hub nut.

Aug 11, 2008 | 2001 Kia Sephia

Not finding what you are looking for?
1998 GMC Jimmy Logo

Related Topics:

579 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...