Question about 1994 Plymouth Sundance

Open Question

91 Chevy Corsica brake lights suddenly stopped working

Not sure if relevant but someone jimmied my '91 Chevy Corsica trunk open and broke the lock hold, now I've had to tie down the trunk around my back license plate for it to stay down.

Before this my left blinker light went out and a friend cracked the frame of the light, fixed it, then glued the frame back together.

Now, all signals are working fine, but the brake lights aren't working at all.
I would be so grateful if someone can help me with this at a low price.
Thanks, Lora

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 160 Answers

SOURCE: 2 brake lights, turn signals not working 1999 plym. grand voyager

relay

Posted on Nov 11, 2008

  • 55 Answers

SOURCE: Brake Light Install

after you find the panel just pull it out and you will see the back of the tail light with the plugs to the bulbs just simply twist the plug and pull out,that will come out and you can change your bulb and put it back together.

Posted on Nov 26, 2008

artbesio
  • 55 Answers

SOURCE: 94 Plymouth Voyager ABS light stays on

Had a similar problem a number of years back. Underneath the brake pedal arm is a small switch with a plunger. when you press the pedal down it moves the plunger in and engages the brake lights. when you let off it's supposed to pop back out (turning the lights back off). Possible it is getting stuck in the down position and could need to be replaced. very easy to install and only about an 8 dollar fix.

Posted on Mar 09, 2009

awcforever
  • 359 Answers

SOURCE: All my blinkers and brake lights stopped working

PO430: Catalyst System Efficiency Below Threshold (Bank 2)

Here is a site that you should go to and further look at the common problems with your catylitic converter, and also your other emissions systems. Hope it helps, and please rate!!!

http://www.discountconverter.com/catalytic_converters_news/news_page.cfm?Key=codes-po420-po421-po430-po431&News=120

Posted on Mar 15, 2009

  • 4 Answers

SOURCE: Right rear brake light and blinker dont work

when you use the right turn signal, does it blink faster?. Could it be the bulb holder is damaged or rusty?

Posted on May 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Chevy Corsica front drivers side caliper is locking up


Have you replaced the caliper and the flex hose ?
How do you get it to release ?

Mar 11, 2014 | 1995 Chevrolet Corsica

1 Answer

No Brakes on 1995 Chevy Corsica


Crack fluid line, See if have fluid there. May need new caliper.

Mar 08, 2014 | Cars & Trucks

1 Answer

Corsica brakes


I'll assume you want this fixed.
Here goes:
The reason it wouldn't bleed is likely the bleeder was plugged up, or maybe the wheel cylinder or caliper was stuck.
The reason it is overheating and shaking is the brakes are engaged, and are locking up as you drive.
You will need to go back to that wheel that wouldn't bleed and find out why it wouldn't.
If you don't wish to take the wheel cylinder or caliper apart and fix (clean? overhaul? ) it, you may choose to replace it instead. Be sure to open the bleeder valve before you install the new one, makes it easier to bleed.
Be blessed.

Feb 18, 2013 | 1995 Chevrolet Corsica

1 Answer

How to pen 1994 chevy corsica trunk with jammed trunk lock


if the key won`t turn in the lock then there is to ways to go about it.one is you may be able to get to the lock by going through the rear seat(removal) and try to get into the trunk or use a dent puller and screw it into the lock and pull the lock out,the use a screw driver to open the trunk by inserting it into the mechanism and turning.you can have a new lock keyed to the original key and you may have to get a new locking clip that holds the lock in the trunk.

Apr 27, 2011 | 1994 Chevrolet Corsica

1 Answer

1991 Corsica: Where do I find the trunk release lever in my 91 c...


My 91 has a button located to the left of the gear shift (center console). It's an electric control that, when pushed, opens the trunk.

May 18, 2010 | 1991 Chevrolet Corsica

1 Answer

When I turn on lights of 91 Camry, tail lights & backup lights are not lit. Rear side marker lights & license plate lights are lit. When I step on the brake, all the rear, stop, backup, plate and...


I have a 98 Camry and was having problems with tail lights and fuses. I kept blowing a fuse which was making my tail lights not work. I tried paying very close attention to when they would be working and all the sudden not be working. I know it sounded funny, but I told my mechanic that it seemed if I used my trunk, my fuse would blow. Come to find out, the wire was touching the hinges of my trunk. So when I popped my trunk and closed it, it blew my fuse every time.

Sep 14, 2009 | Toyota Camry Cars & Trucks

2 Answers

91 corvette backup light do not work also 3rd brake light ,bulb&fuses are ok.


I had the same problem with a 91 mazda 626. turned out that the wires that ran from the lights along the trunk and back into the harness were broken from opening/closing the trunk. i would check around that area first.

May 29, 2009 | 1991 Chevrolet Corvette

1 Answer

My brake lights wont come on on my 2003 chevy impala


Some cars have two brake switches under the dash. Try manually pushing the button on the switch while someone looks at the brake lights. It may just need adjusted. Good luck. Please rate me so I know how I'm doing. Thanks.

Dec 30, 2008 | 2003 Chevrolet Impala

3 Answers

Fuse diagram for 91 chevy corsica


Need copy of wiring schematic for 1991 chevy corsica

Dec 10, 2008 | 1991 Chevrolet Corsica

1 Answer

Locked Out!


the hood should stell open no matter what un less the cable is broke i have the same car all that happens when the alarm is set off is the horn blows and the lights flash it doint stop the hood from oping

Sep 07, 2008 | 1990 Nissan Maxima

Not finding what you are looking for?
1994 Plymouth Sundance Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...