89 dodge dakota hood release diagram - 1989 Dodge Dakota 2WD

SOURCE: Hood release broke inside car. How do you release hood?

see if you can grab the broken cable end with a pair of locking pliars (vise grips) and pull

SOURCE: The hood release lever does not release the hood.

Do you have a new cable?? If not most likely there is a need for it it may be stretched out. You can grab the end of the cable that goes to the release (in the interior) with a pliers and pull it this will finish the cable and a new one will most likely be needed

SOURCE: 1994 dodge dakota firing order diagram

Does it have the firing order embossed on the intake manifold?

SOURCE: how to put on a serpentine belt.. fo a 89 dodge

Find the belt routing diagram (under hood or on radiator support). put a wrench on the center bolt at the idler pully push or pull to loosen belt.

Colin Stickland

• 22516 Answers
• Posted on May 01, 2010

SOURCE: The hood cable release from a 1997 Dodge Dakota

long screwdriver up from underneath and pull lever back